MENU
PoE: |
- Computer Network Accessories
-
- » CABLE TESTERS#03867
Cable tester RJ-45 LCD with PoE 802.3af, 802.3at indication (NOYAFA NF-488)
The Noyafa NF-488 is an indispensable device for testing PoE installations. The device recognizes which lines have voltage, gives its value and determines the PoE standard. They can also be connected in series between the switch and the powered device, thanks to which it is possible to obtain information about the current consumption and the power consumed by the receiver.
In addition to PoE testing, the NF-488 performs a standard wiremap test to validate the wiring.Display 128x64mm backlit LCD Tested cabling RJ45 PoE voltage range DC 5 - 60V Recognized standards 802.3af,
802.3at,
nonstandardCurrent measurement 0 - 3A Power measurement 0 - 18W Detected failures incorrect connections,
short circuits and interruptions in the wiringBattery type 3x1.5V AAA Packaging cardboard,
caseThe set includes: etui, tester, terminator, set of 15cm measuring connectors.
Batteries are not included.
#09346Cable tester RJ-45, RJ-11 witch port flash function WT20A
A simple diode tester which enables checking the correctness of the plugs in computer and telephone connections.
Port flash function.Tested cabling RJ45,
RJ 11Detected failures incorrect connections,
short circuits and interruptions in the wiring,
port flashAdditional features PoE voltage test,
RJ45 and RJ11 crimping quality testPower 9V 6F22 battery Packaging Blister Batteries not included.
#03052Cable tester RJ-45, RJ-11 with PoE indication (NOYAFA NF-468PF)
A simple diode tester which enables checking the correctness of the plugs in computer and telephone connections. It is additionally equipped with a PoE voltage indicator.
The device uses diode indicators to inform whether and on which pairs there is PoE voltage.Tested cabling RJ45,
RJ 11Detected failures incorrect connections,
short circuits and interruptions in the wiringScanning modes normal and slow Power 9V 6F22 battery Packaging Blister Batteries not included.
- » ADVANCED CABLE TESTERS#03883
Cable tester RJ-45 and Optical Power Meter, w/LCD, wire tracker, VFL (NOYAFA NF-8508)
Advanced cable tester that performs standard copper cable tests - wiremap, PoE test and length. Additionally fiber ports to perform optical power measurements and VFL. The other benefits are large colour LCD displayTested cabling RJ45,
RJ11,
fibre optic (2.5mm SC;ST;FC ferrule)Functionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signalingWiring tests cable lenght,
connection map,
digital pair finder with generator,
light penFiber optic tests OPM -70..+10dBm 850/1300/1310/1490/1550/1625nm,
VFL 10mWCable length measurement 10÷200m Measurement of the distance to damage yes PoE tests Standard/Non standard,
voltage measurement,
automatic detection,
60V maxWire tracker digital,
analogue 455kHzErgonomics big and clear LCD display,
automatic shutdown,
long operating time,
measuring data memoryPower in-built 1500mAh battery,
USB-C chargingDimensions 148x70x32 mm (main),
198x50x28 mm (reciever)Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
#03090Cable tester RJ-45, w/LCD, digital wire tracker, WT26G
The WT26G digital wire tracker is an advanced device used for complex network cabling tests. It enables basic network cabling diagnostics- connection map, measurement of length and distance to fault. It also enables simple PoE tests - polarity, voltage measurement.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
short circuit detection,
interruptions,
reverse connections,
measurement of the distance to damage,
temperature compensation,
sound signaling,
PoE testsWiring tests cable lenght,
connection map,
digital pair finder with generator,
port blink testCable length measurement 400 m Measurement of the distance to damage yes Ergonomics big and clear LCD display,
automatic shutdown,
long operating timePower 1360mAh battery rechargable by micro USB (transmitter),
9V 6F22 (reciever)Dimensions 173x87x37 mm (main),
187x35x29 mm (reciever)The kit includes:
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
#03808Cable tester RJ-45, w/LCD, wire tracker, ping testing (NOYAFA NF-8601W)
Advanced cable tester thet performs PING, PoE, wiremap and length tests. The other benefits are large colour LCD display and data export to micro SD card.
The device is equipped with a clear, backlit LCD display.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signaling,
terminator identificationWiring tests cable lenght,
connection map,
digital pair finder with generator,LAN testing ICMP ping Cable length measurement 10÷1000m Setting the electric capacity of the tested cable yes Measurement of the distance to damage yes Ping test delay,
lost packetsErgonomics big and clear LCD display (320x240 pixels),
automatic shutdown,
long operating time,
export of measurement data to a micro SD cardPower in-built battery,
micro USB chargingDimensions 173x92x34 mm (main),183x58x35 mm (reciever) Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
#03866Cable tester RJ-45, w/LCD, wire tracker, ping testing, TDR (NOYAFA NF-8601S)
The NF-8601S cable tester is an advanced device for complex network cabling tests.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signaling,Wiring tests cable lenght,
connection map,
digital pair finder with generator,LAN testing ICMP ping,
flash portCable length measurement 10÷1500m Setting the electric capacity of the tested cable yes Measurement of the distance to damage yes Ping test delay,
lost packetsErgonomics big and clear LCD display (320x240 pixels),
automatic shutdown,
long operating time,
export of measurement data to a micro SD cardPower in-built battery,
micro USB chargingDimensions 173x92x34 mm (main),183x58x35 mm (reciever) Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
#03872Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209)
The NF8209 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)Display LCD 128x64 dot-matrix with backlight Frequency of generator 130kHz Max. length of the tested cabling 200m (length test),
600m (wiremap)Length measuring accuracy 1.6m Max. current <130mA (emitter),
<100mA (reciever)Function selection graphical menu Power supply 3x1.5V AAA (emitter),
9V (reciever)PoE test range 5÷60V Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA The kit includes:
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
#03884Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209S)
The NF8209S cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)Display LCD 128x64 dot-matrix with backlight Frequency of analogue generator 455kHz Max. length of the tested cabling 200m (length test),
600m (wiremap)Length measuring accuracy 1.6m Max. current <130mA (emitter),
<100mA (reciever)Function selection graphical menu Power supply 3.7V 1400mAh polymer lithium battery (both transmitter and reciever) PoE test range 5÷60V Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA The kit includes:
- emitter,
- reciever,
- connection wires,
- soft case
#03091MicroScanner PoE cable tester (Fluke Networks MS-POE)
The new generation of the well-known and valued Microscanner. The new tester does not have a socket for coaxial cables. However, new diagnostic possibilities appeared: PoE voltage measurement, determining whether the port is able to provide sufficient power, identification of the port speed up to 10Gbps.Display LCD,
monochromeTested cables UTP,
FTP,
SSTP,
coaxial 75Ω/50Ω/93ΩConnectors RJ-11,
RJ-45,
FCable length measure 1500ft (460,0 m) Wiremap compliant with TIA-568A/B Remote device detection switch,
POTS,
terminatorTransmission speed indicator 10 Mbps,
100 Mbps,
1000 Mbps,
2.5Gbps,
5Gbps,
10GbpsDetected malfunctions open,
short,
separated pairs,
crossed pairs,
reverse pairsDistance to breakage yes Working in active networks yes Tone generator digital (two songs),
analog (four songs)PoE detection yes PoE standards 802.3af,
802.3at,
802.3btDimensions 163x76x36 mm Weight 363 g Warranty 12 months Manufaturer Fluke Networks Compatible with:
#02903 IntelliTone 200
-
Page 9 of 23
|
[Polski»]
TAGS: sfp wdm, keystone, thermal imagers, SFP slot, ethernet cable, Twisted Pair Cables, M12, multimeter, ZigBee, PoE, cable detector, IEC 61850-3, ftp cable, SFP modules, LSZH, patch panel, LTE Antennas, PoE plus, Twisted Pair UTP, server cabinet, mdr-60-24, LSOH, POE switch, switch, hanlong tools, kvm switch, splice box, Rack Cabinet, IEC 62443-4-2, cable tracker, clamp multimeters, keystone, coaxial cable, patchpanel, temperature datalogger, oring switch, EN50155, patch cord, SFP28, utp cable, cable locator, LoRa, UniFi, pigtail, cables cat 5e, Smart Grid, lsa, True RMS, environmental monitoring, patch cable, digital multimeter, SFP+, FTTH, cable tester