Communication for Industry
Friday, 18 January
Search for product:
#06522
NEW
Industrial Media ConvertersORING NETWORKINGIPMC-111PB++-60W

Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket (ORing IPMC-111PB++-60W)

IPMC-111PB++-60W is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB++-60W supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB++-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard 4-pair cable in an Ethernet network. Each IPMC-111PB++-60W has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB++-60W with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

IPMC-111PB++-60W also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB++-60W will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB++-60W is reliable media converter with PoE capability and can satisfy most demand of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
100Base-FX (SFP) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification
DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator Green for P.S.E. indicator
DIP Switch
DIP-Switch 1 for LFP mode selection (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
DIP-Switch 3 for Ethernet full/half duplex selection (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
DIP-Switch 4 for fiber full/half duplex selection (ON) Half-Duplex / (OFF) Full-Duplex
DIP Switch for PoE mode
DIP Switch 1/2 DIP Switch 1/2 (OFF)- PoE P.S.E set to master and Asyncronize mode. DIP Switch 1/2 (ON) - PoE P.S.E set to syncronize mode(default)
Power
Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (typical) 31.2 Watts (P.S.E. output included)
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension 26.1mm x 70mm x 95mm (1.03 x 2.76 x 3.74 inch)
Weight 210g
Environmental
Storage Temperature -4085C
Operating Temperature -4075C
Operating Humidity 5%95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 2067004hr
Warranty
Warranty period 5 years
IPMC-111PB series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
Recommended power supply: #08397 Power supply 120W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-120-48).
In order to optimize the selection of SFP modules, please contact our Sales Department.


Industrial Media Converters
expand groupexpand group [price]

FAST ETHERNET MEDIA CONVERTERS

 

GIGABIT ETHERNET MEDIA CONVERTERS

 

EN50155 COMPATIBLE CONVERTERS

 

IEC 61850-3 COMPATIBLE CONVERTERS

 

CARD TYPE CONVERTERS AND CHASSIS

 
#08437
779,00 EUR

SERIAL MEDIA CONVERTERS

 
#06891
63,60 EUR
#08459
237,00 EUR
#08460
298,00 EUR
#06893
81,70 EUR

INJECTORS

 



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).