Communication for Industry
Friday, 18 January
Search for product:
#06531
NEW
Wireless DevicesORING NETWORKINGIAP-420+

Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+)

IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 (one port with PoE)
PoE PD Port Present at ETH,
Fully compliant with IEEE 802.3af Power Device specification,
Over load and short circuit protection,
Isolation Voltage 1000 VDC min.,
Isolation Resistance 108MΩ min
WLAN interface
Operating Mode AP/Bridge/Bridge/AP-Client
Antenna Connector 1 x External reverse SMA-type antenna connector
Radio Frequency Type DSSS,
OFDM
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11g/n OFDM with BPSK,
QPSK,
16QAM,
64QAM
Frequency Band 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
Transmit Power 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7,
802.11n HT40 14.5dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
Protocol Support ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D)
LED Indicators
Power Indicator LED x 3,
PWR 1, 2,
(PoE),
Green On- Power is on and functioning Normally.
10/100Base-T(X) RJ45 Port Indicator 2 x LEDs,
Green for port Link/ Act
WLAN LEDs LED,
Green (blinking) for WLAN
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 4-pin terminal block
Power consumption (typical) 4W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41(W)x81(D)x95(H) mm
Weight 292g
Environmental
Storage Temperature -4085C
Operating Temperature -1060C
Operating Humidity 5%95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years


Wireless Devices
expand groupexpand group [price]



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).