EN50155 Network Devices for Rolling Stock and Railway |
Physical Ports | |
---|---|
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) | 1 |
1000Base-FX (SFP) | 1 |
Processing | Store-and-Forward |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control, IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
DIP-Switch setting |
DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable, DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate, DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate, DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex |
LED Indicators | |
Power indicator | Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line) |
10/100TX RJ45 port indicator |
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down, Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps, Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
100Base-FX fiber port indicator |
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down, Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex |
LFP statue indicator | Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
PoE indicator | Amber for P.S.E. indicator |
Power | |
Input power | Dual 50~57 VDC voltage power inputs at 4-pin terminal block |
Power consumption (typical) | 4 Watts (P.S.E. output included) |
Overload current protection | present |
Reverse polarity protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension | 40mm x 70mm x 95mm |
Weight | 291g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷75°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 1 |
100/1000Base-FX SFP ports | 1 |
Technology | |
Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
LED Indicators | |
Power / Ready indicator | Green LED x 2 (ON) power input on-line / (OFF) power input off-line |
100/1000TX RJ45 port indicator |
LED for Link/Act and Speed indicator, Green on only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down, Green and Amber on - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down, If amber on only - 10Mbps (This is not working mode) |
100/1000X Port Indicator | Green for port Link/Act |
Power | |
Input power | Dual DC inputs. 12÷48VDC on 4-pin terminal block |
Power consumption (typical) | 3.6W |
Overload current protection | present |
Reverse polarity protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x H x D) | 26.1mm x 70mm x 95mm |
Weight | 190g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷70°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
Port RJ-45 10/100 Base-TX Auto MDI/MDIX | 1 |
Fiber port 100Base-FX Multi-mode SC | 1 |
Processing | Store-and-Forward |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-T(X) and 100Base-FX, IEEE 802.3x for Flow control |
LED Indicators | |
Power / Ready indicator | Green Ready LED x 3 |
10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for duplex |
100Base-FX fiber port indicator |
Green for fiber port Link/Act, Amber for duplex |
LFP statue indicator | Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
Fault indicator | Amber - Indicate unexpected event occurred |
Power | |
Input power |
Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack |
Power consumption (typical) | 10.56W |
Overload current protection | present |
Reverse polarity protection | present on terminal block |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x H x D) | 52mm x 106.1mm x 144.3mm |
Weight | 660g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷85°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
Power Automation |
IEC 61850-3, IEEE 1613 |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
Port RJ-45 10/100 Base-TX Auto MDI/MDIX | 1 |
Fiber port 100Base-FX Single-mode SC | 1 |
Processing | Store-and-Forward |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-T(X) and 100Base-FX, IEEE 802.3x for Flow control |
LED Indicators | |
Power / Ready indicator | Green Ready LED x 3 |
10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex |
100Base-FX fiber port indicator |
Green for fiber port Link/Act, Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex |
LFP statue indicator | Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
Fault indicator | Amber- Indicate unexpected event occurred |
Power | |
Input power |
Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack |
Power consumption (typical) | 10.08W |
Overload current protection | present |
Reverse polarity protection | present on terminal block |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x H x D) | 52mm x 106.1mm x 144.3mm |
Weight | 660g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷85°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
Power Automation |
IEC 61850-3, IEEE 1613 |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
Port RJ-45 10/100 Base-TX Auto MDI/MDIX | 1 |
100Base-FX SFP port | 1 |
Processing | Store-and-Forward |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-T(X) and 100Base-FX, IEEE 802.3x for Flow control |
LED Indicators | |
Power / Ready indicator | Green Ready LED x 3 |
10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex |
100Base-FX fiber port indicator |
Green for fiber port Link/Act, Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex |
LFP statue indicator | Amber LED – (ON) LFP function fail / (OFF) LFP function disable |
Fault indicator | Amber- Indicate unexpected event occurred |
Power | |
Input power |
Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack |
Power consumption (typical) | 10.56W |
Overload current protection | present |
Reverse polarity protection | present on terminal block |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x H x D) | 52mm x 106.1mm x 144.3mm |
Weight | 650g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷85°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
Power Automation |
IEC 61850-3, IEEE 1613 |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 1 | |
100/1000Base-FX SFP port | 1 |
Technology | |
Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
Processing | Store-and-Forward |
DIP-Switch 1/2 |
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps, DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps |
LED Indicators | |
Power indicator | Green Power LED x 1 |
10/100Base-T(X) RJ45 port indicator |
Green only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down, Green and Amber - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down |
*Note - If amber on only - 10Mbps (This is not avail mode) | |
100/1000Base-(F)X fiber port indicator | Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down |
Power | |
Power consumption (typical) | 3.6W |
Overload current protection | present |
Physical Characteristic | |
Dimension (W x H x D) | 21.8mm x 66.5mm x 126mm |
Weight | 125g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -10÷60°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Warranty | |
Warranty period | 2 years |