PoE

#07990

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)

PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	4
100Base-SX Multimode ports (2km, 1310nm, SC connector)	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
100Base-FX Fiber Port Indicator	Green for port Link/Act.
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical)	6.78W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1mm x 94.9m x 144.3mm
Weight	395g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)

for special orders only
Net Price: 351,00 EUR

product card»

#07992

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)

IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	4
100Base-SX Multimode ports (2km, 1310nm, SC connector)	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
100Base-FX Fiber Port Indicator	Green for port Link/Act.
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 12~57VDC on 6-pin terminal block
Power consumption (typical)	6.78W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	41mm x 94.9m x 144.3mm
Weight	530g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)

for special orders only
Net Price: 409,00 EUR

product card»

#07993

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	4
100Base-SX Multimode ports (30km, 1310nm, SC connector)	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
100Base-FX Fiber Port Indicator	Green for port Link/Act.
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 12~57VDC on 6-pin terminal block
Power consumption (typical)	5.6W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	41mm x 94.9m x 144.3mm
Weight	530g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

for special orders only
Net Price: 460,00 EUR

product card»

#07991

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	4
100Base-SX Multimode ports (30km, 1310nm, SC connector)	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
100Base-FX Fiber Port Indicator	Green for port Link/Act.
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical)	5.6W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1mm x 94.9m x 144.3mm
Weight	395g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

for special orders only
Net Price: 379,00 EUR

product card»

#07972

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)

IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX	4
100/1000Base-X SFP Ports	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table	1024 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4)	Green for port Link/Act., Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6)	Green for port Link/Act
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 24-36 VDC on 6-pin terminal block
Power consumption (typical)	6.5W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	41mm x 94.9m x 144.3mm
Weight	650g
Environmental
Storage Temperature	-40÷85°C (-40÷185°F)
Operating Temperature	-10÷60°C (-40÷158°F)
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)

for special orders only
Net Price: 391,00 EUR

product card»

#07971

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX	4
100/1000Base-X SFP Ports	2
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table	1024 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4)	Green for port Link/Act., Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6)	Green for port Link/Act
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical)	6.3W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1mm x 94.9m x 144.3mm
Weight	410g
Environmental
Storage Temperature	-40÷85°C (-40÷185°F)
Operating Temperature	-40÷70°C (-40÷185°F)
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

for special orders only
Net Price: 349,00 EUR

product card»

#07645

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE)	4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
100/1000Base-X SFP port	1
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	1024 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4)	Green for port Link/Act., Green for power injected
10/100/1000Base-T(X) RJ45 port indicator (P5)	Green for port Link/Act., Amber for 100Mbps indicator
100/1000Base-X port indicator	Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2	DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1	Power-1 failed warning - (ON) enable, (OFF) disable
DIP-Switch 2	Power-2 failed warning - (ON) enable, (OFF) disable
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (typical)	6.2W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1(W) x 94.9(D) x 144.3(H) mm
Weight	407 g
Environmental
Storage Temperature	-40÷85°C (-40÷185°F)
Operating Temperature	-40÷70°C (-40÷158°F)
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

for special orders only
Net Price: 323,00 EUR

product card»

#08433

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.)	4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX	1
100/1000Base-X SFP port	1
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	1024 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4)	Green for port Link/Act., Green for power injected
10/100/1000Base-T(X) RJ45 port Indicator (P5)	Green for port Link/Act., Amber for 100Mbps Indicator
100/1000Base-X SFP port indicator	Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2	DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1	Power-1 failed warning - (ON) enable, (OFF) disable
DIP-Switch 2	Power-2 failed warning - (ON) enable, (OFF) disable
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 12~36VDC on 6-pin terminal block
Power consumption (typical)	6.5W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	41 (W) x 94.9 (D) x 144.3(H) mm
Weight	580 g
Environmental
Storage Temperature	-40÷85°C (-40÷185°F)
Operating Temperature	-40÷60°C (-40÷140°F)
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

for special orders only
Net Price: 372,00 EUR

product card»

#07989

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

IPS-1080 is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	8
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 2x 12~57VDC on 6-pin terminal block
Power consumption (typical)	4.5W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1mm x 94.9m x 144.3mm
Weight	412g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

Net Price: 351,00 EUR

product card»

#07988

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

IPS-1080A is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX	8
Technology
Ethernet Standards	IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, 802.3at PoE specyfication
MAC Table	2048 MAC addresses
Processing	Store-and-Forward
LED Indicators
Power indicator	Green - Power LED x 2
Fault indicator	Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator	Green for port Link/Act., Green for PoE power injected
Fault contact
Relay	Relay output to carry capacity of 1A at 24VDC
Power
Input power	Dual DC inputs. 50VDC on 6-pin terminal block
Power consumption (typical)	4.5W
Overload current protection	present
Reverse polarity protection	not present
Physical Characteristic
Enclosure	IP-30
Dimension (W x D x H)	26.1mm x 94.9m x 144.3mm
Weight	412g
Environmental
Storage Temperature	-40÷85°C
Operating Temperature	-40÷70°C
Operating Humidity	5%÷95% Non-condensing
Regulatory approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty
Warranty period	5 years

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

Net Price: 281,00 EUR

product card»

PoE: