This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
High-Technologies Supplier
Saturday, 23 August
[Log In]
Items tagged as

SFP slot:
  • Communication for industry
    • Industrial Switches
      • » PoE SWITCHES SMART OR MANAGED
          #07985

          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)

          RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
          1G/10GBase-X with SFP+ port 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 128 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          MSTP (RSTP/STP compatible),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client,
          DHCP Relay,
          Modbus TCP,
          DNS client proxy,
          SMTP Client
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator 1G/10G Green for port Link/Act
          PoE indicator Blue PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 1000 Watts power supply included (-40 ~ 55°C PoE output 720W Max.,
          55 ~ 60°C PoE output 360W Max.)
          Power consumption (typical) 75Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431 x 342 x 44 mm
          Weight 6520 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)
          for special orders only
          Net Price: 2 740,00 EUR
          product card»
          #07920

          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)

          IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          RSTP/MSTP (IEEE 802.1w/s),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          Voice VLAN,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client/snooping,
          DHCP Relay,
          Modbus TCP,
          ARP inspection,
          SMTP Client
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green - Power LED x 2
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Green for Link/Act indicator,
          Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 19Watts (PoE output not included)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm
          Weight 1560g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)
          for special orders only
          Net Price: 1 220,00 EUR
          product card»
          #07646

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x100Base-FX SFP ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100 Base-FX SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.2mm x 106.1mm x 145.4mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)
          Net Price: 423,00 EUR
          product card»
      • » PoE SWITCHES UNMANAGED
          #07670

          Unmanaged industrial switch, 4x 100/1000 RJ-45 PoE, 1x 100/1000 RJ-45, 1x 1000 SFP (Wave Industrial WO-IS-M1GF5GT-4POE)

          Physical Ports
          100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4 w/PoE + 1
          1000Base-FX SFP ports 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          LED Indicators power,
          RJ45 ports (5)
          Power Dual DC inputs. 48÷57VDC on 4-pin terminal block
          Power consumption (typical) 6.5W
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x H x D) 33mm x 115mm x 85mm
          Weight 350g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷85°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged industrial switch, 4x 100/1000 RJ-45 PoE, 1x 100/1000 RJ-45, 1x 1000 SFP (Wave Industrial WO-IS-M1GF5GT-4POE)
          Net Price: 77,30 EUR
          product card»
          #07972

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)

          IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 650g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)
          for special orders only
          Net Price: 382,00 EUR
          product card»
          #07971

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

          IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.3W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷185°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)
          for special orders only
          Net Price: 340,00 EUR
          product card»
          #07645

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

          IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps indicator
          100/1000Base-X port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
          Power consumption (typical) 6.2W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
          Weight 407 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)
          for special orders only
          Net Price: 316,00 EUR
          product card»
          #08433

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

          IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps Indicator
          100/1000Base-X SFP port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
          Weight 580 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)
          for special orders only
          Net Price: 363,00 EUR
          product card»
          #06517

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 889g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)
          Net Price: 527,00 EUR
          product card»
          #06518

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 60W at 12~24VDC,
          120W at 24~57VDC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 916g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)
          for special orders only
          Net Price: 586,00 EUR
          product card»


top

Page 13 of 19
$ €