MENUPRICE REDUCTIONS
- Computer Network Accessories
-
- » ADDITIONAL ACCESORIES#08204
USB100 / USB dome camera
USB UVC/MJPEG digital camera with high resolution and with IR Leds for direct connection to the VUTLAN system controller.
It allows to view the monitored room on an ongoing basis as well as send a video sequence to an email address in response to a defined event.
In addition, the camera connected to the VUTLAN controller is visible in the network at a dedicated URL, allowing to capture the video stream just like from an IP camera (MJPEG stream).HARDWARE FEATURES: Interface USB format(Complies with USB 2.0 CAMERA: Image Sensor 1/4" Color CMOS H62 Resolution 1.0 Megapixel (640 x 480) Minimum Illumination 0.01 Lux @ F1.2 VIDEO/IMAGE: Video Compression MJPEG Frame Rate & Resolutions Max. 20 fps at 640x480 (VGA),
Max. 20 fps at 320x240 (QVGA)Video Streaming Controllable Frame Rate OTHERS: Cable lenght 5m Operating Temperature 0°C∼ 40°C (Humidity 0% RH∼ 80% RH) Weight 550g
#03128VT-BAT / Reservation battery 9V
"VT-BAT / Reservation battery 9V" keeps the device operational while the main power source is disabled. The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.
A 9V is not included. You can use a 9V battery enclosed in a standard PP3 enclosure.
#03121VT485r / OSDPv2 Reader Extension
Allows to connect readers, and keypads with OSDP protocol support. It is an extension PCB board and should be purchased separately.
It can be used with VT335t, VT825t, and VT855t monitoring systems. VT485r can be inserted inside the monitoring unit while the unit is in operation. VT485r has internal termination and by default, it is switched ON (if required can be turned Off).
Allows to connect SE mini reader, SE keypad, and any other 3rd party OSDP readers or keypads.
-
Page 2 of 2
|
