| HARDWARE FEATURES: | |
|---|---|
| Interface |
1 10/100Mbps LAN/WAN Port, 1 10/100Mbps LAN Ports, 1 SIM Card Slot |
| Button | WPS/Reset Button |
| External Power Supply | 9VDC/0.85A |
| Dimensions ( W x D x H ) | 6.06×4.49×1.42 in ( 154×114×36 mm) |
| Antenna Type | 2 Detachable External 4G LTE Antennas |
| WIRELESS FEATURES: | |
| Wireless Standards |
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b |
| Frequency | 2.4GHz |
| EIRP | <20dBm |
| Signal Rate | 300Mbps at 2.4GHz |
| Wireless Security |
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions |
| Network Type |
4G- FDD-LTE- B1/B3/B5/B7/B8/B20 (2100/1800/850/2600/900/800 MHz), TDD-LTE- B38/B40/B41 (2600/2300/2500 MHz), 3G- HSPA/UMTS- B1/B5/B8 (2100/850/900 MHz) |
| SOFTWARE FEATURES: | |
| Security |
IPv4 SPI Firewall, IP and MAC Address Binding |
| Operating Modes |
3G/4G Router, Wireless Router |
| WAN Type | Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access) |
| Management |
Local Management, Remote Management |
| DHCP |
Server, DHCP Client List, Address Reservation |
| Port Forwarding |
ALG, Virtual Server, Port Triggering, UPnP, DMZ |
| Dynamic DNS |
DynDns, NO-IP |
| Protocols |
IPv4, IPv6 |
| Guest Network | 2.4 GHz Guest Network |
| Administration |
Upgrade Firmware, Factory Default, System Log, Diagnostic Tools |
| OTHERS: | |
| Certification |
CE, RoHS |
| Package Contents |
3G/4G Wireless AC Router, RJ45 Ethernet Cable, Power Adapter, Quick Installation Guide |
| Requirements |
Microsoft Windows 98SE/NT/2000/XP/Vista™/7/8/8.1/10, MAC OS, NetWare, UNIX or Linux, Internet Explorer 11, Firefox 12.0, Chrome 20.0, Safari 4.0, or other, Java-enabled browser, Micro SIM Card |
| Environment |
Operating Temperature 0°~40° (32°~104°), Storage Temperature -40°~70° (-40°~158°), Operating Humidity 10%~90% non-condensing, Storage Humidity 5%~90% non-condensing |
| HARDWARE FEATURES | |
|---|---|
| Standards and Protocols | Bluetooth 6.0 |
| Interface | USB 2.0 |
| Dimensions ( W x D x H ) | 0.58 × 0.27 × 0.74 in (14.8 × 6.8 × 18.9 mm) |
| OTHERS | |
| Package Contents |
Bluetooth 6.0 Nano USB Adapter UB600, Quick Installation Guide |
| System Requirements | Windows 10/8.1/8/7/XP |
| Environment | |
| Operating Temperature | 0℃~40℃ (32℉ ~104℉) |
| Storage Temperature | -40℃~70℃ (-40℉ ~158℉) |
| Operating Humidity | 10%~90% non-condensing |
| Storage Humidity | 5%~90% non-condensing |
| Manufacturer | TP-Link |
| Physical Ports | |
|---|---|
| 10/100/1000/2500 Base-T(X) Ports with P.S.E. in RJ45 Auto MDI/MDIX | 4 (total power budget of 240Watts with maximum 90Watts per port) |
| 1000/10GBase-X, SFP+ ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X, IEEE 802.3bz for 2.5GBaseT, IEEE 802.3ae for 10G SFP+, IEEE 802.3x for Flow control, IEEE 802.3af/at/bt PoE specification |
| MAC Table | 8192 MAC addresses |
| Processing | Store-and-Forward |
| Switching latency | 10 µs |
| Switching bandwidth | 60 Gbps |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 4-pin terminal block |
| Power consumption (typical) | 10W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x D x H) | 35 x 88 x 130 mm |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷75°C (-14÷163°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
CE EMC (EN 55035, EN 55032), FCC Part 15 B |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN 62368-1 (LVD) |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 10 µs |
| Switching bandwidth | 24 Gbps |
| Packet buffer Size | 4.1Mbits |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 256 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12~48VDC on 6-pin terminal block |
| Power consumption (typical) | 12Watts (power device not included) |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) |
50 (W) x 126 (D) x 146 (H)mm, 1.97 (W) x 4.96 (D) x 5.75 (H) inch |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
CE EMC (EN 55035, EN 55032), FCC Part 15 B |
| EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS |
EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN |
| 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) | |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN 62368-1 |
| Warranty | |
| Warranty period | 5 years |
| Insertion Loss | ≤0.30dB |
|---|---|
| Return Loss | ≥30dB |
| Operating Temperature | -40 ÷ 80°C |
| Insertion Loss | ≤0.20dB |
|---|---|
| Return Loss | ≥50dB |
| Repeatability | ≤0.2dB |
| Durability |
≤0.1 dB typical change, 500 matings |
| Interchangeability | ≤0.2dB |
| Tensile Strength | >10kg |
| Operating Temperature | -40 ÷ 80°C |
| Insertion Loss | ≤0.30dB |
|---|---|
| Return Loss | ≥30dB |
| Operating Temperature | -40 ÷ 80°C |
Page 8 of 10
|