New Items in Atel Electronics

MS8236 - Digital multimeter with lan and phone tester

Max. LCD display: 1999
Range selection: auto
DC voltage: 200m/2/20/200/600 V ± 0,5%
AC voltage: 200m/2/20/200/600 V ± 0,8%
DC current: 200µ/2m/20m/200 mA ± 1,2%, 2/10A ± 2,0%
AC current: 200µ/2m/20m/200 mA ± 1,5%, 2/10 A ± 3,0%
Resistance: 200/2k/20k/200k/2M/20M Ω ± 1,0%
Diode test: yes
LCD backlight: yes
Data hold: yes
Network cable test (RJ-11, RJ-45): T568A, T568B, 10Base-T
Phone check: busy, ringing, clear
Shield integrity test: yes
Manufacturer: Mastech

Water detection cable (Sky Control 5500.003)

Length: 1-100m can be ordered
Response time: 7–12 sec Two conductors of nickel-plated copper 7�0.12 mm in the double fiberglass insulation.
Manufacturer: Sky Control

MS8232B - Digital Multimeter

Max. LCD display: 3999
Range selection: automatic
Insulation class: CAT III 600V
DC voltage: 400m/4/40/400 ± 0,5%, 600 V ± 0,8%
AC voltage: 400m/4/40/400 ± 1,0%, 600 V ± 2,3%
DC current: 400u/4000u/40m/400 mA ± 1,8%
AC current: 400u/4000u/40m//400 mA ± 2,0%
Resistance: 400/4k/40k/400k/4M Ω ± 1,0%, 40 MΩ ± 1,2%
Capacitance: 4n/40n/400n/4u/40u/100 uF ± 5,0%
Frequency: 0 � 5MHz ± 1,5%
Diode test: yes
Non contact AC voltage detector: yes
Continuity test: yes
Back light: yes
Auto power off: yes
Power: 2x 1,5V AAA
Dimensions: 150 x 70 x 50 mm
Weight: 238 g
Manufacturer: Mastech

MS8235 - Digital multimeter with lan tester

Max. LCD display: 1999
Range selection: auto
DC voltage: 200m/2/20/200/600 V ± 0,5%
AC voltage: 200m/2/20/200/600 V ± 0,8%
DC current: 200µ/2m/20m/200 mA ± 1,2%, 2/10A ± 2,0%
AC current: 200µ/2m/20m/200 mA ± 1,5%, 2/10 A ± 3,0%
Resistance: 200/2k/20k/200k/2M/20M Ω ± 1,0%
Frequency: 20 kHz ± 1,5%
Diode test: yes
LCD backlight: yes
Data hold: yes
Network cable test (RJ-11, RJ-45): T568A, T568B, 10Base-T
Shield integrity test: yes
Manufacturer: Mastech

MS6818 - Cable locator

MS6818 is ideal for tracing cables in walls/underground. With this device you can easily locate fuses and breakers on circuits or find interruptions and short-circuits in cables, for example in floor heating systems. It is also helpful in tracing metallic pipes.

Kit includes transmitter and reciever.
Transmitter
Power: 6 x 1,5V battery
Dimmensions: 190 x 89 x 42,5 mm
Reciever
LCD backlight: yes
Power: 1 x 9V battery
Dimmensions: 241,5 x 78 x 38,5 mm

MS6300 - Multifinctions environment tester

Range selection: automatic
Temperature: -10�C � 60�C ± 1,0�C
Humidity: 20% � 80% relative humidity (RH) ± 3.0% RH
Light: 0�50000 Lux ± 5.0%
Sound: 30dB � 130dB ± 1.5dB
Anemometer: 0.4�20m/s ± 3.0%
Air Flow (CMM): 0�999900CMM ± 3.0%
Data hold: yes
Relative measurement: yes
Maximum value measurement: yes
Dimensions: 280x89x50mm
Power: 1x9V 6F22
Manufacturer: Mastech

Power distribution unit 1+40; 8x230V (Sky Control SC1108)

Device is used for load management and allows to switch on/off or reboot up to 8 outlets.
It is possible to connect up to 40 CAN sensors or/and additional extension units, GSM modem and one analog sensor.
GSM modem art. SC920 is ordered separately.
REMOTE CONTROL
IP monitoring: Web, SNMP, manual SMS (GSM modem art. SC920 is ordered separately!)
Sensors control: Administrative 3-level control of sensors using login
INTERFACE & PROTOCOL SUPPORT
Interface: Access via any Internet browser.
LAN: Ethernet 10/100Mbit
Network protocols: Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version.
OS: Linux 2.6.38
RAM: 64Mb
ROM: 128Mb FLASH
Software: Built-in software for events processing.
Alert type: FTP, syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings: Built-in function for ping
LEDs: 4 green ACT, CN1, CN2, ERR;
Clock: Built-in clock with time synchronization
Watchdog: Built-in watchdog timer
POWER
Power input: IEC C20 240V * 16A. Fuse protection.
Power output: 8* C13 240V *2A
Power consumption: 6W-18W
Max. load: 4kW
Power reservation: 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet: 100Mbit
USB port: USB 2.0
Mini USB AB: USB 2.0 HS
Analog port: 8X6P4C for connection of any analog sensor.
CAN BUS: 2 x 6P6C for connection of up to 40 CAN sensors on each BUS. Fuse protection on each line.
Relay outputs: 8 latching relais 230V*5A
EXTERNAL MEMORY
SD card: 4Gb Flash
FEATURES
Installation: 19"
Dimensions: (LxHxW) 440*44*85mm
Net weight: 1,8 kg
Supply includes: PDU, power cable 240V, C13/C14 power cable, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs, 19" mounting angles.

Monitoring unit 1+40 (Sky Control SC2110)

It is possible to connect up to 40 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.
GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.
REMOTE CONTROL
IP monitoring: Web, SNMP, manual SMS (GSM modem art. SC920 is ordered separately!)
Sensors control: Administrative 3-level control of sensors using login
INTERFACE & PROTOCOL SUPPORT
Interface: Access via any Internet browser.
LAN: Ethernet 10/100Mbit
Network protocols: Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version.
OS: Linux 2.6.38
RAM: 64Mb
ROM: 128Mb FLASH
Software: Built-in software for events processing.
Alert type: FTP, syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings: Built-in function for ping
LEDs: 4 green ACT, CN1, CN2, ERR;
Clock: Built-in clock with time synchronization
Watchdog: Built-in watchdog timer
POWER
Power input: 12V. In case of loss of adapter, any other chargers 10-12V with min. power of 6W can be used.Fuse protection.
Power consumption: 6W-18W
Max. consumption: 18W
Power reservation: 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet: 100Mbit
USB port: USB 2.0
Mini USB AB: USB 2.0 HS
Analog port: 6P4C for connection of any analog sensor.
CAN BUS: 2 x 6P6C for connection of up to 40 CAN sensors on each BUS. Fuse protection on each line.
EXTERNAL MEMORY
SD card: 4Gb Flash
FEATURES
Installation: 19"
Dimensions: (LxHxW) 440*44*64mm
Net weight: 1,2 kg
Supply includes: Monitoring unit, power supply 12V, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs.

PIR, vibration and temperature sensor (Sky Control SC470)

Sensor is needed for control of movement over an infra-red range and measurement of temperature and vibration indoors.
Technical specifications
Viewed angle: 110�
Max. distance: 12 m
Measured range of temperature: -20... +60�C
Accuracy: 1�C
Features
Installation: On the bottom there is a mounting slot for fastening sensor by plastic bracket.
Connection: CAN sensor contains RJ-12 jack and is connected to CAN input of any system unit, or CAN output of another CAN sensor. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 sensors into a linear circuit.
Supply includes: Sensor, built in 3-wired shielded patch cable RJ12 (2m), screws, plastic bracket, manual.
Net weight: 125g
Dimensions (LHW): 105�57�40mm

Smoke, humidity and temperature sensor (Sky Control SC460)

At installation indoors, inside the rack etc., sensor monitors occurrence of smoke, temperature and humidity inside the building.
Automatic restoration of power after the actuation.
Technical specifications
Smoke sensitivity: 0,05 - 0,2 db/m
Response time: 10 sec
Measured temperature range: -20… +60�C
Accuracy: 1�C
Measured humidity range: 10 - 95%
Accuracy %RH: 5%
Features
Installation: On the bottom there are mounting holes for fastening smoke sensor to the surface using screws 4.8�20mm or/and bracket and M4 screws.
Connection: Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-11 patch cable. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 smoke sensors into a linear circuit.
Supply includes: Sensor, 3-wired shielded patch cable RJ12 (2m), bracket, 2 screws and 2 nuts M4, 2 screws 4.8�20mm, double sided sticker.
Net weight:0.2 kg
Dimensions (LHW): Ø100�45mm

Outdoor temperature sensor (Sky Control SC501)

Sensor needed for measurement of temperature outside of premises, can be applied indoors.
Technical specifications
Operating temperature: -40...+100�C
Accuracy: 1�C
Features
Installation: An all-weather 2-pair UTP cable of 15m emerges from the cylinder. After installation of cylinder outside of a building, the cable must be placed to reach the system unit.
Connection: After installation RJ-11 connector is connected to an analog input of any system unit. Determination of type of sensor and connection occur automatically.
Supply includes: 4-wired cable RJ11 (15m) with sensor head
Net weight:450g
Dimensions (LHW): Device represents cylinder of Ø12�28mm with 15m cable

Temperature sensor (Sky Control SC500)

Sensor is needed for measurement of temperature indoors.
Operating temperature: −40… +100�C
Technical specifications
Operating temperature: -40… +100�C
Accuracy: 1�C
Features
Installation: On the bottom there is a ledge with Ø4.5mm and height 1mm and a mounting hole in 50mm from it for fastening the sensor using 4.8�16 mm screw.
Connection: Temperature sensor contains RJ-12 jack and is connected to an analog input of a system unit. Determination of type of sensor and connection occur automatically.
Supply includes: Sensor, 4-wired patch cable RJ11 (2m), 4.8�16mm screw, double sided sticker.
Net weight:50g
Dimensions (LHW): 60�18�18mm

Leakage sensor (Sky Control SC590)

When water is in contact with the metal cores, the sensor indicates the emergence of moisture. If sensor is constantly responding to high water levels, replace the sensor with a level sensor.
Attention! Metal cores are detectors of water, mount strictly downwards as close as its possible to a floor.
Technical specifications
Temperature range: -10… +90�C
Response time: 1 sec
Recovery time: 1 sec
Installation: On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in 50 mm from it for fastening sensor by screw 4.8�16mm. There are two metal cores on the side of device.
Connection: Connector RJ12 is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically.
Supply includes: Sensor, 4-wired cable RJ-12 (2m), bracket, 2 screws and 2 nuts M5, screw 4.8�16mm, double sided sticker.
Net weight:60g
Dimensions (LHW):60�18�18mm

Airflow and temperature unit (Sky Control SC450)

At connection of thermal cable sensors monitors airflow and temperature. Can control up to 6 airflows at the connection of up to 6 airflow cable sensors.
System interface shows one temperature sensor and connected airflow sensors, at absence of wind or airflow displays alarm.
(Supply includes only two thermal cable sensors. Additional ones can be purchased separately.)
Technical specifications
Response time: 10 sec
Recovery time: 10 sec
Measured range of temperature: -40... +100�С
Accuracy: 2�С
Features
Installation: On the bottom there are 4 mounting holes for fastening with screws, with distances 50 mm and 89 mm between centers. The cable are connected to the connectors on the side.
Connection: RJ-12 jack is connected to CAN inputs of an airflow modul and to any CAN input of any another system unit. Determination of type of sensor and connection occur automatically. Thermal sensors are connected to jacks on the side of the airflow unit.
Supply includes: Airflow unit, 3-wired shielded patch cable RJ12 (2m), screws, double sided sticker, 2 cables with airflow sensor, stickers for fixture.
Net weight:0.4 kg
Dimensions (LHW): 86�48�25 mm

Monitoring unit 8+40; 4x230V (Sky Control SC8110)

It is possible to connect up to 8 analog, 40 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts, 4 loads 230V.
GSM modem art. SC920 is ordered separately. Dry contacts unit SC16 is ordered separately.
REMOTE CONTROL
IP monitoring: Web, SNMP, manual SMS (GSM modem art. SC920 is ordered separately!)
Sensors control: Administrative 3-level control of sensors using login
INTERFACE & PROTOCOL SUPPORT
Interface: Access via any Internet browser.
LAN: Ethernet 10/100Mbit
Network protocols: Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version.
OS: Linux 2.6.38
RAM: 64Mb
ROM: 128Mb FLASH
Software: Built-in software for events processing.
Alert type: FTP, syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings: Built-in function for ping
LEDs: 4 green ACT, CN1, CN2, ERR;
Clock: Built-in clock with time synchronization
Watchdog: Built-in watchdog timer
POWER
Power input: IEC C20 240V * 16A. Fuse protection.
Power output: 4* C13 240V *2,5A
Power consumption: 6W-18W
Max. load: 4kW
Power reservation: 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet: 100Mbit
USB port: USB 2.0
Mini USB AB: USB 2.0 HS
Analog port: 8X6P4C for connection of any analog sensor.
CAN BUS: 2 x 6P6C for connection of up to 40 CAN sensors on each BUS. Fuse protection on each line.
Relay outputs: 4 on/off * 230V*5A
EXTERNAL MEMORY
SD card: 4Gb Flash
FEATURES
Installation: 19"
Dimensions: (LxHxW) 440*44*75mm
Net weight: 1,7 kg
Supply includes: Monitoring unit, power cable 240V, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs, two plugs TBW-5-6P, 19" mounting angles.

Dry contacts modul (Sky Control SC16)

Device mounted and connected inside of any master unit can be used together with any contacts, for example with door or window contacts, circuit breakers etc.
Allows addressed correlation of dry contacts responses and permits, adequate measures to be taken established by the system logic.
Technical specifications
Dry contacts: 16
Connector:10 pin
Features
Installation: On the PCB there are 3 mounting holes for fastening to the surface using screws 3 mm inside of any master unit.
Connection: Jack IDC2-10 is connected to IDC2-10 input of master unit. Determination of PCB's type and connection occur automatically. Monitoring system allows connection of up to 16 dry contacts.
Supply includes: PCB, 10-wired IDC2 cable (10cm), 3 screws M3.
Net weight:80g
Dimensions (LHW): 70x10�25mm

Monitoring unit 8+40; 4xrelay (Sky Control SC8100)

It is possible to connect up to 8 analog, 40 CAN sensors or/and additional extension units, one 1-Wire I-touch button reader and to use up to 4 relay devices, one GSM modem and 16 dry contacts.
GSM modem art. SC920 (#08241) is ordered separately. Dry contacts unit SC16 (#08235) is ordered separately.
REMOTE CONTROL
IP monitoring: Web, SNMP, manual SMS (GSM modem art. SC920 is ordered separately!)
Sensors control: Administrative 3-level control of sensors using login
INTERFACE & PROTOCOL SUPPORT
Interface: Access via any Internet browser.
LAN: Ethernet 10/100Mbit
Network protocols: Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version.
OS: Linux 2.6.38
RAM: 64Mb
ROM: 128Mb FLASH
Software: Built-in software for events processing.
Alert type: FTP, syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings: Built-in function for ping
LEDs: 4 green ACT, CN1, CN2, ERR;
Clock: Built-in clock with time synchronization
Watchdog: Built-in watchdog timer
POWER
Power input: 12V. In case of loss of adapter, any other chargers 10-12V with min. power of 6W can be used.Fuse protection.
Power consumption: 6W-18W
Max. consumption: 18W
Power reservation: 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet: 100Mbit
USB port: USB 2.0
Mini USB AB: USB 2.0 HS
Analog port: 8X6P4C for connection of any analog sensor.
CAN BUS: 2 x 6P6C for connection of up to 40 CAN sensors on each BUS. Fuse protection on each line.
Relay outputs: 4 * 230V*5A
EXTERNAL MEMORY
SD card: 4Gb Flash
FEATURES
Installation: 19"
Dimensions: (LxHxW) 440*44*70mm
Net weight: 1,5 kg
Supply includes: Monitoring unit, power cable 240V, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs, two plugs TBW-5-6P, 19" mounting angles.

Self-amalgamating butyl rubber tape 1.5 m

Self-amalgamating, low-voltage insulating compound 1.5 m length
Carrier: butyl rubber,
Thickness: 3.2 mm,
Widths: 38 mm

Coaxial hex crimping tool (HT-106H)

Terminal ratchet crimping tool (HT-5532CL) with cable locator

Crimping tool for unisolated car connectors, crimping for wires with 0.5-1.0; 1.5-2.5; 4.0-6.0 mm2 (10-12, 14-16, 18-20 AWG) cross-section. Return block mechanism. Cable locator.

Terminal ratchet crimping tool (HT-5132H)

For wires with 0.5-1.0; 1.5-2.5; 4.0-6.0 mm2 (22-18, 16-14, 12-10 AWG) cross-section.

Terminal crimping tool (HT-A261)

For wires with 0.25-0.5-0.75-1-1.5-2.5 mm2 cross-section.

(HT-H1440) Closed-barrel D-sub contacts crimping tool

0,14 � 0,5mm2 (20-26 AWG)

(HT-H1441) Closed-barrel D-sub contacts crimping tool

0,5 � 4,0 mm2 (12-20 AWG)

(HT-K5501) Tool kit

HT-H518G compression tool + stripper HT-332 (#02215)

Floor cabinet 24U 19", OptiRACK PLUS Light, 1200x600x600 mm (height,width,depth)

Front door: toughened safety glass
Rear odro: metal sheet, mountable also as side door
19" mount: 2x24U, front and rear
Dimensions: 1200x600x600 mm
Protection class: IP20
Carrying capacity: 400 kg

Smoke sensor (Sky Control SC560)

At installation indoors, in a rack and etc., the sensor monitors occurrence of smoke. Automatic restoration of power after the actuation.
Technical specifications
Sensitivity:0,05 - 0,2 db/m
Features
Installation: On the bottom there are mounting holes for fastening smoke sensor to the surface by 4.8�20mm screws or/and bracket and M4 screws.
Connection: Detector's jack RJ-12 is connected to an analog input of any system unit using patch-cable RJ-12. Determination of the sensor's type and connection occur automatically. The monitoring system allows to connect several smoke detectors into a linear circuit. For this purpose each detector has two jacks RJ-12 input and output. The first is connected to an analog input of the system unit using a patch-cable RJ-12, the consequent is connected via patch-cable RJ-12 to an output of the first detector and so on. as one sensor with one address.
Supply includes: Detector, 4-wired cable RJ11 (2m), 2 screws and 2 nuts M4, 2 screws 4.8�20mm, bracket, double sided sticker.
Net weight:220g
Dimensions (LHW): Ø100�45

Humidity sensor 5% (Sky Control SC510)

Sensor is needed for measurement of relative humidity 10-95% indoors with relative accuracy 5%.
Technical specifications
Measured humidity range: 10-95% RH
Accuracy: 5%RH
Operation temperature range: -40 .. +100�С
Features
Installation: On the bottom there is a ledge with Ø4.5mm and height 1mm and a mounting hole in 50mm from it for fastening the sensor using 4.8�16 mm screw.
Connection: Humidity sensor contains RJ-12 jack and is connected to an analog input of any system unit. Determination of type of sensor and connection occur automatically.
Supply includes: Sensor, 4-wired patch cable RJ11 (2m), 4.8�16mm screw, double sided sticker.
Net weight:50g
Dimensions: 60�18�18mm

MINI Monitoring unit; 1+40 (Sky Control SC2100)

It is possible to connect up to 40 CAN sensors or/and additional extension units, GSM modem, one analog sensor and 16 dry contacts.
GSM modem art. SC920 is ordered separately.
Dry contacts unit SC16 is ordered separately.
Article: SC2100
REMOTE CONTROL
IP monitoring: Web, SNMP, manual SMS (GSM modem art. SC920 is ordered separately!)
Sensors control: Administrative 3-level control of sensors using login
INTERFACE & PROTOCOL SUPPORT
Interface: Access via any Internet browser.
LAN: Ethernet 10/100Mbit
Network protocols: Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version.
OS: Linux 2.6.38
RAM: 64Mb
ROM: 128Mb FLASH
Software: Built-in software for events processing.
Alert type: FTP, syslog, SMTP or SNMP, SMS (GSM modem is ordered separately)
Pings: Built-in function for ping
LEDs: 4 green ACT, CN1, CN2, ERR;
Clock: Built-in clock with time synchronization
Watchdog: Built-in watchdog timer
POWER
Power input: 12V. In case of loss of adapter, any other chargers 10-12V with min. power of 6W can be used.Fuse protection.
Power consumption: 6W-18W
Max. consumption: 18W
Power reservation: 12V, built-in voltage monitor, power reservation battery 9-12V connection possible.
INLETS/OUTLETS
Ethernet: 100Mbit
USB port: USB 2.0
Mini USB AB: USB 2.0 HS
Analog port: 6P4C for connection of any analog sensor.
CAN BUS: 2 x 6P6C for connection of up to 40 CAN sensors on each BUS. Fuse protection on each line.
EXTERNAL MEMORY
SD card: 4Gb Flash
FEATURES
Installation: Desktop
Dimensions: (LxHxW)215*44*64mm
Net weight: 1 kg
Supply includes: Monitoring unit, power supply 12V, RJ45 cord, manual CD, warranty, 4 self-adhesive rubber legs.

Thermosensor (Sky Control SC401)

Water detection cable sensor (Sky Control SC591)

When water is in contact with detection cable sensor indicates the emergence of moisture.
If sensor is constantly responding to high water levels, replace the sensor with a level sensor (Art.5500490).
Length: 1-100m can be ordered. Article 5559.001
Response time: 7–12 sec
Connection: On the bottom there is a ledge with Ø 4.5 mm and height 1 mm; and a mounting hole in
50 mm from it for fastening sensor by screw 4.8�16mm. 2-pin terminal strip type TBW-5-2p with mounted water detection cable is plugged into sensor’s connector.
Installation: Connector RJ11 is connected to an analog input of any system unit. Determination of
sensor’s type and connection occur automatically. The other end of the sensor connects 2-wire water detection cable with the plug.
Supply includes: sensor, cable, terminal strip type TBW-5-2p, screw 4.8�16mm, double sided sticker
Technical specifications
Net weight: 25g
Dimensions (LHW): 60�18�18mm

GSM embedded unit (Sky Control SC920)

Can be embedded in all Monitoring master units. Needed when LAN is absent or for reservation of a connection channel of master unit with Internet; for sending SMS and voice messages.
Technical specifications
INTERFACE
GSM: Quad-Band 850/ 900/ 1800/ 1900 MHz
LEDs: 1 green SMD
Chip: SIM900D
CONNECTORS
IDC2: 16 pin
SMA / Ipex: Outdoor GSM antenna with SMA jack can be used. Modem is with U. Fl connector on PCB.
FEATURES
Dimensions (LxHxW):70*70*22mm
Net weight:50 g
Installation: There are 3 mounting M3 holes on a board.
Supply includes: GSM modem, GSM quadband antenna with plug, 16-pin IDC2 cable, SMS-Ipex cable.

AC voltage monitor (Sky Control SC520)

Sensor is needed for measurement of standard power supply 220-230V or any other capacity in the power supply system, for example in an outlet, on an extension cord or in a rack-mountable socket strip.
Connection: Plug 220V is put into the outlet necessary for measurement of 220V. Cable's USB connector must be connected to the USB output, connector RJ-11 must be connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically.
Supply includes: Sensor and USB RJ-11 patch cable (1.8 m).
Technical specifications
Voltage measured: 90-250V
Net weight: 140g
Dimensions (LHW): 80�40�22mm

Access sensor (Sky Control SC530)

At installation on doors, windows, etc., sensor controls status of door, window: opened, closed.
Technical specifications
Features
Installation: Using patch-cable RJ-12 sensor is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. One of devices in the kit, for example, magnet, is mounted on a door; the second device is mounted on a jamb of a door. At opening a door contact is disconnected, and system of monitoring receives notification on opening. The first sensor is connected using patch-cable RJ-12 to an analog input of the system unit, the consequent sensor is connected via patch-cable RJ-12 to an output of the first sensor and so on.
Supply includes: Contact sensor, magnet, 4-wired patch cable RJ-12 (2m), two screws 4.8�16mm, 2 screws M5 and 2 nuts, bracket, double sided sticker.
Net weight:80g
Dimensions (LHW): Two compact devices with dimensions 60�18�18mm

Motion detector (Sky Control SC570)

Sensor is needed for control of movement over an infra-red range and measurement of temperature indoors.
Technical specifications
PIR detection angle: 110�
Max. detection distance: 12 m
Features
Installation: On the bottom there is a mounting slot for fastening sensor by plastic bracket.
Connection: Motion sensor contains RJ-11 jack and is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. To adjust sensitivity read manual. To change cable connection, open the cover and read manual.
Dimensions (LxHxW):105�57�40mm
Net weight:125g
Supply includes: Sensor, cable RJ11 2m, 4.8�16mm screw, 2-pin terminal strip type TBW-5-2p, double sided sticker.

Thermal control panel (Sky Control SC102)

Used to measure the temperature inside the premises and manage heaters and fans or conditioners.
2 button regulation, LEDs matrix, Input IEC C14 fused, 2 outputs C13.
(Thermal control panel does not require master module to operate)
Technical specification
Control: Manual
RAM: 16Kb
Software: Embedded
LEDs: Green — power, 2 Red — outputs
Temperature indicator: 3 segments
Voltage input: 240V
Power consumption: 3W
Max. power consumption: 5 W
Switching load per relay output: 240V*5A
Iinlets / Outlets
Thermistor jack: 3,5 mm audio
Inlet: 240V*10A
Outlets: 2�240V*5A
Features
Installation: 19" rack
Dimensions (LxHxW): 440*44*110mm
Net weight: 0.8 kg
Supply includes: Unit, power cord 230V, thermistor cable sensor, warranty, technical data sheet.

Managed switch, 24x SFP 100/1000 Mbps, (16xSFP + 8x Combo UTP/SFP), 19". (Ruby Tech FGS-2924R2)

Standards: IEEE 802.3/ad/ab/u/x/z, IEEE 802.1D/w/s/q/p/x
Copper ports: 8x 10/100/1000 Mbps RJ-45 Combo
Free slots: 24x SFP 100/1000 Mbps, (16x + 8x Combo UTP/SFP)
Auto MDI/MDI-X: yes
Auto-negotiation (Nway): yes
Switching architecture / speed: Store and Forward
Packet flow control: Flow Control
VLAN support: port-based / 24, tag-based / up to 4k active VLANs, Q-in-Q, Multicast Vlan management
I/O throughput management: Port Trunking, Load Balancing, Bandwidth Control, Jumbo Frames (9K)
Transmission security / quality: QoS, ToS, ACL, GVRP, STP, RSTP, MSTP, IGMP, Port Mirroring, Broadcast Storm Control, IP Mac Binding, DHCP Snooping
Management: WWW, console, telnet, SNMP v1/v2c,
Switching capacity [Gbps]: 48
MAC address memory: 8000
Buffer / operating memory [kb]: 3200
Housing / case type: 19", metal
Dimensions: 442x209x44 mm
Operating temperature: 0�C � 50�C
Operating humidity: 5% � 90%, non-condensing
Power: ~230V AC 50 Hz
Certificates:CE
Warranty period: 18 months
Manufacturer: Ruby Tech

Adaptor cleaning stick, 2.5 mm

Routerboard MikroTik RB711-5Hn-uFL

CPU: Atheros AR7240 400MHz
Memory: 32MB, SDRAM
Wireless standards: Built in 5GHz AR9280 802.11a/n card, 1 MMCX/uFL connector (depends on model)
Copper ports: 1x 10/100 Mbps RJ-45
Auto MDI/MDI-X: yes
Bootloader: RouterBOOT
Data storage: 64MB NAND, build-in
Speaker: beeper
Dimensions: 105x105 mm
Power: PoE 10 V � 28 V DC
Power consumption: 4.5W
Operating system: MikroTik Router OS 2.9 Level 4
Manufacturer: MikroTik

Reflectometer OTDR SMF KI6702

Dynamic range: 34/32 dB (SM), 28/30 dB (MM)
Wavelength: 1310 nm ± 20 nm, 1550 nm ± 20 nm (SM), 850 nm ± 20 nm, 1300 nm ± 20 nm (MM)
Selectable ranges: 2, 5, 10, 20, 40, 80, 120, 160, 240 km
Pulse widths: 6, 12, 25, 100, 300, 1000, 3000, 10000 ns
Display type: 4.3" TFT 16bit
Emitter type: LD
Connector: select connector type from SC, FC, ST
Deadzone: 1.2 m (events), 4.5 m (attenuation)
Average time: 5s/15s/30s/1min/3min/10min
Distance measure accuracy: ± (0.5 + resolution + 5 � 10^-5 � L) m
Attenuation detect accuracy: ± 0.04 dB/dB
Data storage: 128 MB internal memory It stores 780 traces for long distance and 50,000 traces for short distance.
Communication port: USB
Power: NiMH rechargeable battery
Battery life: 5~7h
Operating temperatures: -15�C � 50�C
Operating humidity: 0 � 95%, non-condensing
Weight: 1.3 kg
Dimensions: 214x137x35 mm