MENU
#08876
Wireless access point Ubiquiti PowerBeam M5 MIMO 5GHz (Ubiquiti PBE-M5-620)
| Standards | IEEE 802.11a/n |
|---|---|
| Ports | 1x 10/100/1000 Mbps RJ-45 |
| Chipset |
Atheros MIPS 74KC, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Flash memory | 8 MB |
| Antenna |
build-in, 29 dBi |
| Range | 30+ km |
| VSWR | 1.5 |
| Diameter | 600mm |
| Weight | 6.4 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 8.5 W |
| Power | PoE 24V |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, Non-condensing |
| Manufacturer | Ubiquiti |
#05353
Wireless Access Point UniFi UAP-nanoHD (Ubiquiti UAP-nanoHD)
- Four-stream, 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
- 200+ concurrent client capacity
- Powered by 802.3af PoE (PoE injector included with single pack)
Dual-band, 802.11ac Wave 2 access point that can support over 200 clients with its 2+ Gbps aggregate throughput rate.
The Access Point nanoHD (UAP nanoHD) is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The UAP nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you'd like to enhance your wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each (Supports 2x2 MIMO), 5 GHz - (2) Single-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO) |
| Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
| Power Method |
802.3af PoE, UniFi Switch (PoE) |
| Maximum Power Consumption | 10.5W |
| Maximum TX Power |
2.4 GHz - 23 dBm, 5 GHz - 26 dBm |
| BSSID | 8 per Radio |
| Dimensions | 160 x 160 x 32.65 mm |
| Weight | 300 g (315 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Noncondensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#05349
Wireless Access Point Ubiquiti UniFi UAP AC M PRO, AC Mesh; (Ubiquiti UAP-AC-M-PRO)
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas | 3x Internal Dual-Band Antennas (8 dBi) |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method | 802.3af PoE (Supported Voltage Range- 44 to 57VDC) |
| Power Supply |
48V, 0.5A Gigabit PoE Adapter |
| Maximum Power Consumption | 9 W |
| Maximum TX Power | 22 dBm |
| BSSID | Up to 8 per Radio |
| Dimensions | 343.2 x 181.2 x 60.2 mm |
| Weight | 633 g |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -40 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n |
6.5 Mbps to 400 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| Manufacturer | Ubiquiti |
#08394
Wireless Access Point UniFi UAP PRO (Ubiquiti UAP-PRO)
The UniFi® Enterprise Wi-Fi System is a scalable enterprise
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - 3 Integrated (Supports 3x3 MIMO with Spatial Diversity), 5 GHz - 2 Integrated (Supports 2x2 MIMO with Spatial Diversity) |
| Wi-Fi Standards | 802.11 a/b/g/n |
| Power Method |
Passive Power over Ethernet (48V), 802.3af Supported |
| Power Supply |
48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 12 W |
| Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
| BSSID | Up to Four Per Radio |
| Dimensions | 200 x 200 x 36.5 mm |
| Weight | 298 g (358 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 80% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#07039
Wireless Access Point Ubiquiti NanoStation AC Loco 5-pack (Ubiquiti NS-5ACL)
| Ports | 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.8 |
| Beam width | 45° |
| Dimensions | 179 x 77.5 x 59.1 mm |
| Weight | 180 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07072 PoE 802.3af Adapter, POE-24-24W-G
#08203
Omni-directional antenna AIRMAX MIMO 10dBi (Ubiquiti AMO-2G13)
| Directional gain | 13 dBi |
|---|---|
| Frequency range | 2.35 - 2.55 GHz |
| Vertical beam width | 7 degree |
| Horizontal beam width | 360 degree |
| VSWR | 1,7 |
| Connector | 2xRSMA |
| Weight | 2.4 kg |
#07071
Airmax dish antenna 5 GHz, 34 dBi (Ubiquiti RocketDish 5G-34)
| Directional gain | 34 dBi |
|---|---|
| Frequency range | 5.1 - 5.9 GHz |
| Vertical beam width | 3 degree |
| Horizontal beam width | 3 degree |
| Polarization | dual linear |
| Cross-pol izolation | 35 db min. |
| F/B Ratio | -42 dB |
| VSWR | 1,4 |
| Wind Survivability | 125 mph |
| Connector | SMA-RP(F) |
| Diameter | Ø 1050 mm |
| Weight | 13.5 kg |
| Manufacturer | Ubiquiti |
#05356
Wireless Access Point UniFi UAP-AC-HD (Ubiquiti UAP-AC-HD)
- 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.7 Gbps throughput rate
- 2.4 GHz (4x4 MIMO) band with a 800 Mbps throughput rate
- Powered with 802.3at PoE+*
- (2) GbE RJ45 ports
- (1) USB port
Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.
The Access Point AC HD (UAP AC HD) is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (4x24MIMO) bands. The UAP AC HD also has a focused antenna pattern to enhance your network's capacity and reduce interference from neighboring access points. This access point is powered with 802.3at PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types. The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO), 5 GHz - (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each (Supports 4x4 MIMO) |
| Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
| Power Method |
802.3at PoE+, UniFi Switch (PoE), 44 to 57VDC |
| Maximum Power Consumption | 17W |
| Maximum TX Power |
2.4 GHz - 6-25 dBm, 5 GHz - 6-25 dBm |
| BSSID | 8 per Radio |
| Dimensions | 220 x 220 x 48.1 mm |
| Weight | 700 g (830 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Noncondensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 1000+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Page 4 of 4
|
