MENU
#08132
Routerboard MikroTik RB711-5Hn-uFL
| CPU | Atheros AR7240 400MHz |
|---|---|
| Memory |
32MB, SDRAM |
| Wireless standards |
Built in 5GHz AR9280 802.11a/n card, 1 MMCX/uFL connector (depends on model) |
| Copper ports | 1x 10/100 Mbps RJ-45 |
| Auto MDI/MDI-X | yes |
| Bootloader | RouterBOOT |
| Data storage |
64MB NAND, build-in |
| Speaker | beeper |
| Dimensions | 105x105 mm |
| Power | PoE 10 V ÷ 28 V DC |
| Power consumption | 4.5W |
| Operating system | MikroTik Router OS 2.9 Level 4 |
| Manufacturer | MikroTik |
#07093
Routerboard MikroTik RB750
| CPU | Atheros AR7240 300MHz (overlock 400MHz) |
|---|---|
| Memory | 32MB DDR SDRAM |
| Data storage | 64 MB onboard NAND memory chip |
| Copper ports | 5x 10/100 Mbps RJ-45 Ethernet ports |
| Bootloader | RouterBOOT |
| Speaker | beeper |
| Power | PoE 9V ÷ 28V DC |
| Power jack | 9V ÷ 28V DC |
| Power consumption | max. 3W |
| Dimensions | 113x89x28mm |
| Operating system | MikroTik Router OS v3 Level 4 |
| Manufacturer | MikroTik |
#07070
Routerboard MikroTik RB951G-2HnD
| CPU | Atheros AR9344 600MHz CPU |
|---|---|
| Memory | 128MB DDR2 onboard memory |
| Copper ports | 5x 10/100/1000 Mbps RJ-45 Ethernet ports |
| USB ports | 1 |
| LED Indicators |
Power, NAND activity, 5 Ethernet LEDs, wireless activity LED |
| Power | PoE 9V ÷ 28V DC on Ethernet port 1 (Non802.3af) |
| Power jack | 9V - 28 V DC |
| Power consumption | max. 7W |
| Antennas |
2x2 MIMO PIF antennas, max gain 2.5dBi |
| RX sensitivity 802.11g | -96dBm @ 6Mbit/s to -80dBm @ 54Mbit/s |
| 802.11n | -96dBm @ MCS0 to -78dBm @ MCS7 |
| TX power 802.11g | 30dBm @ 6Mbps to 25dBm @ 54 Mbps |
| 802.11n | 30dBm @ MCS0 to 23dBm @ MCS7 |
| Modulations OFDM |
BPSK, QPSK, 16 QAM, 64QAM |
| DSSS |
DBPSK, DQPSK, CCK |
| Dimensions | 113x138x29mm |
| Operating system | MikroTik Router OS v4 Level 4 |
#06640
Wireless access point 2.4GHz (MikroTik Routerboard RB951Ui-2nD)
This small home access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.
The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
hAP provides PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.
The hAP is preconfigured, so all you need to do, is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
| Standards | IEEE 802.11b/g/n |
|---|---|
| Ports |
5x 10/100 Mbps RJ-45, 1x USB |
| Chipset |
MIPSBE, QCA9531, 650 MHz |
| Operating memory | 64MB DDR SDRAM |
| Storage size | 16 MB |
| Frequency range | 2.4 - 2.5GHz |
| Antenna |
build-in, 2 dBi |
| Beam width | 360° |
| Dimensions | 113 x 89 x 28mm |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5 W |
| Power | 6 V - 30 V (Jack or Passive PoE) |
| Operating temperatures | -30°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC, EAC, ROHS |
| Manufacturer | MikroTik |
#06644
Routerboard RB604 extenstion card
Extenstion card for 4 mini-PCI cards. Designed to use with RB600 and RB532A
#06641
Wireless access point 2.4GHz (MikroTik Routerboard RBwAP2nD)
Small weatherproof wireless access point for mounting on a ceiling, wall or pole
| Standards | IEEE 802.11b/g/n |
|---|---|
| Ports | 1x 10/100 Mbps RJ-45 |
| Chipset |
MIPSBE, QCA9533, 650 MHz |
| Operating memory | 64MB DDR SDRAM |
| Storage size | 16 MB |
| Frequency range | 2.4 - 2.5GHz |
| Antenna |
build-in, 2 dBi |
| Beam width | 360° |
| Dimensions | 185 x 85 x 30 mm |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 4 W |
| Power | PoE 11 V - 57 V (Passive PoE and 802.3af/at with unshielded cable) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
FCC, IC |
| Manufacturer | MikroTik |
#08461
Wireless access point 2.4GHz (MikroTik Routerboard SXT G-2HnD)
| Standards | IEEE 802.11b/g/n |
|---|---|
| Ports |
1x 10/100/1000 Mbps RJ-45, USB 2.0 |
| Operating modes |
Access Point, Bridge, Client, Router |
| Chipset | Atheros AR7241 400MHz CPU |
| Operating memory | 32MB DDR SDRAM |
| Frequency range | 2.4 - 2.5GHz |
| Max. output powe |
802.11b/g - 32dBm @ 6Mbps do 29dBm @ 54 Mbps, 802.11n - 32dBm @ MCS0/8 do 25dBm @ MCS7/15 |
| Receiver sensitivity |
802.11b/g - –96 dBm @ 6Mbps do -80 dBm @ 54 Mbps, 802.11n - –95 dBm @ MCS0 20MHz do –74 dBm @ MCS7 40MHz |
| Antenna |
build-in, 10 dBi |
| Beam width | 60°/60° |
| Dimensions | 140x140x56mm |
| Weight | 265g |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 7 W |
| Power | PoE 8-30V |
| Operating temperatures | -30°C ÷ 80°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
FCC, CE, ROHS |
| Manufacturer | MikroTik |
