MENU
#03111
Radar motion sensor (Vutlan VT572)
A microwave radar high-performance sensor is used for the detection of objects or human movement. This product is an indoor energy-saving high-sensitivity detector.
The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.
The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.
| Technical specifications | |
|---|---|
| Detection angle | 120° |
| Sensing distance | maximum is 8 meters |
| Frequency Range | 5.725GHz-5.875GHz |
| Max. detection distance | 100 m |
| Features | |
| Installation | On the bottom there is a mounting slot for fastening the sensor with a plastic bracket. |
| Connection |
Motion sensor contains RJ-11 jack and is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. To adjust sensitivity, read manual. To change cable connection, open the cover and read manual. |
| Supply includes |
Sensor, cable RJ11 4m, holder |
#08246
Smoke sensor (Vutlan VT560)
The sensor monitors occurrence of smoke.
| Technical specifications | |
|---|---|
| Sensitivity | 0,05 - 0,2 db/m |
| Features | |
| Installation | On the bottom there are Ø5mm mounting holes for fastening the smoke sensor to the surface by 4.8×20mm screws or/and bracket and M4 screws. |
| Connection |
Detector's jack RJ-11 is connected to an analog input of any system unit using patch-cable RJ-11. Determination of the sensor's type and connection occur automatically. The monitoring system allows to connect several smoke detectors into a linear circuit. For this purpose each detector has two jacks RJ-11 input and output. The first is connected to an analog input of the system unit using a patch-cable RJ-11, the consequent is connected via patch-cable RJ-11 to an output of the first detector and so on. as one sensor with one address. |
| Supply includes |
Detector, 4-wired cable RJ11 (2m), 2 screws and 2 nuts M4, 2 screws 4.8×20mm, bracket, double sided sticker. |
| Net weight | 290g |
| Dimensions (LHW) | Ø100×45 |
| Max distance | 150m |
#03110
Spot leak sensor (Vutlan VT593)
The sensor is used for level monitoring of conductive liquids in containers, pits, cellars, etc. Or it is used for leakage detection. The sensor has two stainless steel poles. The detector is encapsulated in plastic housing for conductive liquids. Can be placed near plumbing, trays, raised floors, under equipment, sinks, aquariums, sump pumps, refrigerators, dishwashers, toilets, basements, washing machines, water heaters, and garages.
| Technical specifications | |
|---|---|
| Temperature range | -10… +80°C |
| Max. distance | 100 m |
| Connection | Connector RJ12 is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. |
| Set includes |
Sensor, adapter, 4-wired cable RJ-12 (2m) |
| Net weight | 60g |
| Dimensions (LHW) | 60×18×18mm |
#08242
Temperature sensor (Vutlan VT500)
The sensor is made for measurement of temperature indoors.
Measuring range: -10 ÷ 80°C
Measuring range: -10 ÷ 80°C
| Technical specifications | |
|---|---|
| Operating temperature | -10 ÷ 80°C |
| Accuracy | 1°C |
| Features | |
| Installation | On the bottom there is a ledge with Ø4.5mm and height 1mm and a Ø5mm mounting hole for fastening the sensor using a 4.8×16 mm screw. |
| Connection | Temperature sensor contains RJ-11 jack and is connected to an analog input of a system unit. Determination of type of sensor and connection occur automatically. |
| Supply includes |
Sensor, 4-wired patch cable RJ11 (2m), 4.8×16mm screw, double sided sticker. |
| Net weight | 50g |
| Dimensions (LHW) | 60×18×18mm |
| Max distance | 100m |
#08391
Vibration detector (Vutlan VT540)
Sensor made for remote monitoring of vibration of the elements its attached to.
#08249
Water detection cable sensor (Vutlan VT591)
The sensor informs about occurance of water or other liquids when it comes into contact with the WLC detection cable attached to the sensor.
The cable is placed under the raised floor, cabinets, air conditioners, etc.
The VT-WLC detection cable is necessary for the sensor.
The sensor is incompatible with the VT-WDC cable.
The cable is placed under the raised floor, cabinets, air conditioners, etc.
The VT-WLC detection cable is necessary for the sensor.
The sensor is incompatible with the VT-WDC cable.
| Connection |
Can be connected via RJ-11 cable to each control unit. Determination of the sensor type and connection takes place automatically. At the end of the sensor, connect the 2-wire VT-WLC detection cable. |
|---|---|
| Maximum distance from the controller | 100m |
| The maximum length of the detection cable track | 225m |
| Set includes |
sensor, cable, terminal strip type TBW-5-2p, screw 4.8×16mm, double sided sticker, VT-WLC adapter |
| Net weight | 60g |
| Dimensions (LHW) | 60×18×18mm |
#08236
Wind velocity meter (Vutlan VT550)
Sensor made for monitoring of air conditioners, fans, etc. Sensor controls airflow in the range of 0 - 3 m/s.
| Connection | The sensor is connected to the controller by the RJ-11 network cable. Determination of the sensor type and connection takes place automatically. Sensor response time 0.1s |
|---|---|
| Max. distance | 50m |
| Net weight | 106g |
| Dimensions | 60×18×18mm |
| Power Consumption | 60mW |
| Supply includes |
Sensor converter, airflow sensor, mounting bracket, 2m RJ11/RJ12 cable, screws, nuts, bolts and a sticker. |
#08295
Humidity and temperature sensor (Vutlanl VT490)
Digital sensor made for monitoring temperature and humidity inside buildings, rack cabinets, etc.
| Technical specifications | |
|---|---|
| Measured temperature range | -10 ÷ 80°C |
| Accuracy | ±0.4°C in –10 to 85 °C range |
| Measured humidity range | 0 - 95%RH |
| Accuracy %RH | ± 3% RH in 0 to 80% range |
| Maximum distance from the appliance | 225m |
| Features | |
| Connection |
Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-12 patch cable. Determination of sensor's type and connection occur automatically. The system enables connecting multiple sensors to a linear layout. For this purpose, each sensor is equipped with two RJ-11 input and output sockets. |
| Net weight | 160g |
| Dimensions | 68 × 47 x 26 mm |
#08145
Pressure, humidity and temperature sensor (Vutlan VT450)
Digital sensor made for monitoring temperature, humidity and pressure.
| Communications | |
|---|---|
| Sesnor type | CAN digital sensor |
| Inputs/Outputs | 2x RJ11 6p4c |
| Daisy chain |
Yes, a daisy chain is possible for all CAN sensors. |
| Max. distance from the monitoring unit | 225m |
| LED indicators | Red / Green (RUN/ERROR) |
| Accuracy | |
| Pressure RMS noise | 0.2Pa (equivalent to 1.7cm) |
| Pressure error | ±0.25% (equivalent to 1m at 400m height change) |
| Pressure from °C | ±1.5Pa/K (equivalent to ±12.6cm at 1 °C temperature change) |
| RH accuracy | ± 3% RH (max) |
| Hysteresis | ≤2% RH |
| Response time | 1s |
| Temperature | 1.5°C |
| Environmental | |
| Pressure range | 300 to 1100 hPa |
| Working temperature range | −40 to +85 °С |
| Humidity operating range | 0 to 95% RH |
| Power Requirement | |
| Power input |
12V DC, 1A (power supplied on a CAN bus chain) |
| Current consumption | 1 Watt |
| Mechanics | |
| Dimensions | 68x47x26 mm |
| Packaging weight | 160 g |
#08237
Smoke, humidity and temperature sensor (Vutlan VT460)
Digital sensor made for monitoring temperature and humidity and detecting smoke inside buildings, rack cabinets, etc.
| Technical specifications | |
|---|---|
| Smoke sensitivity | 0,05 - 0,2 db/m |
| Response time | 10 sec |
| Measured temperature range | -10 to +75 °C |
| Accuracy | ±0.4°C in –10 to 85 °C range. |
| Measured humidity range | 0 - 95%. |
| Accuracy %RH | ± 3% RH in range of 0 - 80% |
| Maximum distance from the appliance | 225m |
| Features | |
| Installation | On the bottom there are mounting holes for fastening the smoke sensor to the surface using screws 4.8×20mm or/and bracket and M4 screws. |
| Connection | Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-11 patch cable. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 smoke sensors into a linear circuit. |
| Set includes |
Sensor, 3-wired shielded patch cable RJ11 (2m), bracket, 2 screws and 2 nuts M4, 2 screws 4.8×20mm, double sided sticker. |
| Net weight | 310g |
| Dimensions (LHW) | Ø100×45mm |
Page 3 of 8
|
