MENU
#08843
Wireless access point Ubiquiti NanoBeam M2 MIMO (Ubiquiti NBE-M2-13)
| Standards | IEEE 802.11n |
|---|---|
| Ports | 1x 10/100 Mbps RJ-45 |
| Chipset |
Atheros MIPS 74KC, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Flash memory | 8 MB |
| Antenna |
build-in, 18 dBi |
| VSWR | 1.5 |
| Diameter | 189mm |
| Weight | 1.795 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 6 W |
| Power | PoE 24V |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, Non-condensing |
| Manufacturer | Ubiquiti |
#08141
Wireless access point Ubiquiti NanoStation Loco M2 (Ubiquiti LOCOM2)
| Standards |
IEEE 802.11b/g/n, IEEE 802.3u |
|---|---|
| Ports | 1x 10/100 Mbps RJ-45 |
| Operating modes |
Access Point, Bridge, Client, WDS |
| Chipset |
Atheros MIPS 24KC, 400MHz |
| Operating memory | 32MB SDRAM |
| Flash memory | 8MB |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Max. output power | 20 dBm |
| Antenna |
build-in, 8 dBi, detachable RSMA |
| Dimensions | 163x80x31 mm |
| Weight | 0.18 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5.5 W |
| Power | PoE 24V |
| Operating temperatures | -30°C ÷ 80°C |
| Operating humidity |
5% ÷ 90%, non-condensing |
| Certificates |
CE, FCC, IC RS210 |
#08928
Wireless access point Ubiquiti NanoStation M2 (Ubiquiti NSM2)
| Standards |
IEEE 802.11b/g/n, IEEE 802.3u |
|---|---|
| Ports | 2x 10/100 Mbps RJ-45 |
| Operating modes |
Access Point, Bridge, Client, WDS |
| Chipset |
Atheros MIPS 24KC, 400MHz |
| Operating memory | 32MB SDRAM |
| Flash memory | 8MB |
| Frequency range | 2400 MHz ÷ 2483,5 MHz |
| Gain | 10.4-11.2 dBi |
| Max. output power | 23 dBm |
| Dimensions | 294 x 31 x 80 mm (11.57 x 1.22 x 3.15") |
| Weight | 400 g |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 5.5 W |
| Power |
PoE 24V, 0.5A |
| Operating temperatures | -30°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
FCC Part 15.247, IC RS210, CE |
| Shock & Vibration | ETSI300-019-1.4 |
#08394
Wireless Access Point UniFi UAP PRO (Ubiquiti UAP-PRO)
The UniFi® Enterprise Wi-Fi System is a scalable enterprise
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
access point solution designed to be easily deployed and
managed. UniFi Access Point (AP) indoor models have a
sleek design and can be easily mounted to a ceiling tile
or wall using the included mounting hardware. UniFi AP
(UAP) outdoor models have a form factor built to last
outdoors.
The UniFi Enterprise Wi-Fi System includes the UniFi
Controller software. The software installs on any PC,
Mac, or Linux machine within the network and is easily
accessible through any standard web browser. Using the
UniFi Controller software, an Enterprise Wi-Fi network
can be quickly configured and administered without any
special training. Real-time status, automatic UAP device
detection, map loading, and advanced security options
are all seamlessly integrated.
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - 3 Integrated (Supports 3x3 MIMO with Spatial Diversity), 5 GHz - 2 Integrated (Supports 2x2 MIMO with Spatial Diversity) |
| Wi-Fi Standards | 802.11 a/b/g/n |
| Power Method |
Passive Power over Ethernet (48V), 802.3af Supported |
| Power Supply |
48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 12 W |
| Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
| BSSID | Up to Four Per Radio |
| Dimensions | 200 x 200 x 36.5 mm |
| Weight | 298 g (358 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 80% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#07014
Security Gateway UNIFI (Ubiquiti UNIFI USG)
| Ports |
3x 10/100/1000 Mbps RJ-45 (LAN), 1x RJ45 Serial Port |
|---|---|
| LEDs Per Data Port | Status/Power/Speed/Link/Activity |
| Processor |
Dual-Core 500 MHz, MIPS64 with Hardware Acceleration for Packet Processing |
| System Memory | 512 MB DDR2 RAM |
| On-Board Flash Storage | 2 GB |
| Layer 3 Forwarding Performance |
1,000,000 pps, 3 Gbps (Line Rate) |
| Max. Power Consumption | 7 W |
| Power |
12VDC, 1A Power Adapter (Included) |
| Power Input | 9 to 24VDC Supported Voltage Range |
| Dimensions | 135 x 135 x 28.3 mm (5.32 x 5.32 x 1.11") |
| Weight | 366 g |
| Operating temperatures | -10°C ÷ 45°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
