This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Friday, 1 November
Search for product:
#08414
Transporter EN50155 DevicesORING NETWORKINGTES-3080-M12-BP2

Smart switch, 8x 10/100 M12 Bypass, O-Ring <10ms (ORing TES-3080-M12-BP2)

The TES-3080-M12-BP2 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
It is specifically designed for the toughest industrial environments. TES-3080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.
Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. TES-1080-M12-BP2 included dual bypass ports, These bypass ports protect the network from failures and Network maintenance by ensuring network integrity during power loss. Each of these bypass ports includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operating mode of the Bypass ports is set to Normal , and the local networking device is connected with main-network. When power failure occurs, the Bypass ports is swiftly set to bypass mode to isolate the main-network from the local networking device.
Physical Ports
10/100 Base-T(X) Bypass Ethernet Auto MDI/MDIX 8 (Built-in 2 sets of bypass ports)
Connector Type Waterproof M12
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.6 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic,
SNMP v3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
Fast recovery,
STP,
RSTP,
MSTP
LED Indicators
Power Indicator Green - Power LED x 2,
Indicates power input
Ready / Ring Master Indicator Green - Indicate system ready and Ring master mode
O-Ring Indicator Green- Indicates port operating in O-Ring mode
10/100TX Port Indicator Green for port Link/Act. Amber for Collision/Duplex indicator
Power
Input power Dual 12~48VDC on 5-pin M23 connector
Connector Type Waterproof M12
Power consumption (typical) 5W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Dimension (W x D x H) 125mm x 65mm x 196mm
Weight 896 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years




All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).