Atel Electronics
[-]remove#05949 [-]remove#06506 [-]remove#06592 [-]remove#06569 [-]remove#08397 [-]remove#06892
Module, SFP 1x 100 Mbps LC MM, 2 km, TX: 1310 nm (WO-SML-0113-002K-I) Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V) Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC) Managed switch, 4x 10/1000 RJ-45 + 2x100/1G/2.5G SFP, O/Open-Ring <30ms (ORing IGS-C9042GP) Power supply 120W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-120-48) Media converter 1x RS232 (DB9) + 1x RS-422/485 (TB, 3kV isolated) (ORing ISC-1112-I)
Port 1x 155 Mbps ATM LC MM - - - - -
TX wavelength 1310 nm - - - - -
RX wavelength 1310 nm - - - - -
Max. distance 2 km - - - - -
Cable type 50/125, 62.5/125, 100/140 µm - - - - -
Operating temaperature -40°C ÷ 85°C - - - - -
Module type SFP - - - - -
Warranty period 1 year - - - - -
Supports SDH/STM-1,
SONET/OC-3,
Fast Ethernet
- - - - -
Environment
Working temperature - - - - -25°C ÷ 70°C -
Working humidity - - - - 20÷95% RH non-condensing -
Storage temperature - - - - -40°C ÷ 85°C -
Storage Humidity - - - - 10÷95% RH -
Temperature coefficient - - - - ±0.03%/°C (0÷50°C) -
Vibration (component) - - - - 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axes
-
Vibration (mounting) - - - - compliance to IEC60068-2-6 -
Environmental
Storage Temperature - -40÷80°C(-40÷176°F) -40÷85°C (-40÷185°F) -40÷85°C(-40÷185°F) - -25÷85°C
Operating Temperature - -25÷75°C (-13÷167°F) -40÷70°C (-40÷158°F) -40÷75°C (-14÷163°F) - -10÷70°C
Operating Humidity - 5%÷90% Non-condensing 5%÷95% Non-condensing 5%÷95% Non-condensing - 5%÷95% Non-condensing
Fault contact
Relay - - Relay output to carry capacity of 1A at 24VDC - - -
Input
Voltage range - - - - 88÷264VAC,
124÷370VDC
-
Frequency range - - - - 47÷63Hz -
Power factor (typ.) - - - - 0.93/230VAC at full load,
0.96/115VAC at full load
-
Efficiency (typ.) - - - - 90.5% -
AC current (typ.) - - - - 1.4A/115VAC,
0.7A/230VAC
-
Inrush current (typ.) - - - - 35A/115VAC cold start,
70A/230VAC cold start
-
Leakage current - - - - <1mA/240VAC -
LED Indicators
Power indicator - PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
- - - Green x1
PoE Indicators - 1 x LED,
Blue On - PoE Device Link,
Blue Blinking - Detecting PoE Device,
Blue Off - None PoE Device Detected
- - - -
Power / Ready indicator - - Green - Ready LED x 3 - - -
TxD Indicator - - - - - Green x1
Ring Master indicator - - Green - Flashing to indicate system operated in O-Ring Master mode - - -
RxD Indicator - - - - - Green x1
O-Ring indicator - - Green - Indicate system operated in O-Ring mode - - -
Fault indicator - - Yellow - Indicate unexpected event occurred - - -
10/100TX RJ45 port indicator - - Green for port Link/Act,
Yellow for Duplex/Collision
- - -
Fiber port indicator - - Green for port Link/Act,
Yellow for Link
- - -
Operating Voltage
Input Voltage - Railway 24VDC (12 ~ 57 VDC) on 5-pin M12 female A-coding - - - -
Output Power - 50V / 600mA,
30 Watts max. Per port
- - - -
Others
MTBF - - - - min. 289900h MIL-HDBK-217F (25°C) -
Dimension (W x H x D) - - - - 40mm x 125,2mm x 113,5mm -
Weight - - - - 0,67kg -
Output
DC Voltage - - - - 48V -
Rated current - - - - 2.5A -
Current Range - - - - 0÷2.5A -
Rated Power - - - - 120W -
Ripple & noise (max.) - - - - 120mVp-p -
Voltage adjustment range - - - - 48÷55V -
Voltage tolerance - - - - ±1.0% -
Line regulation - - - - ±0.5% -
Load regulation - - - - ±1.0% -
Setup & rise time - - - - 1500ms & 60ms/230VAC at full load,
3000ms & 40ms/115VAC at full load
-
Hold up time (typ.) - - - - 20ms/230VAC at full load,
20ms/115VAC at full load
-
Physical Characteristic
Enclosure - IP-40 IP-30 IP-40 - ABS
Dimension (W x D x H) - 88.9 x 40 x 178.2 mm 52mm x 106mm x 144mm 52mm x 110mm x 140mm - 71.2mm x 25.3mm x 100.6mm
Weight - 446g 709g <700 g - 130g
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) - - 4 - - -
10/100/1000 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX - 1 (8-pin M12 female A-coding connector) - - - -
RS-232 Connector - - - - - DB9 (Female)
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX - - - 4 - -
10/100/1000 Base-T(X) Port in M12 Auto MDI/MDIX - 1 (8-pin M12 female A-coding connector) - - - -
RS-422/485 Connector - - - - - 10-pin terminal block opto-isolated to 3kV
100Base-FX Singlemode ports (30km, 1550nm, SC connector) - - 2 - - -
100/1G/2.5GBase-X, SFP socket - - - 2 - -
RS-232 Serial Console Port - - - RS-232 in RJ45 connector with console cable (115200bps 8 N 1) - -
RS-232 Signals - - - - - TxD,
RxD,
GND
RS-422/485 Signals (RS422) - - - - - TxD+,
TxD-,
RxD+,
RxD-
RS-422/485 Signals (RS485) - - - - - Data+,
Data-,
GND
Baud Rate - - - - - 300bps to 115.2Kbps
Data bit - - - - - 5, 6, 7, 8
Stop bit - - - - - 1, 1.5, 2
Parity - - - - - None,
Even,
Odd,
Space,
Mark
Flow Control - - - - - XON/XOFF (software),
Auto Hardware Direction Control for RS-485
Power
Input power - - Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Dual DC inputs. 12÷48VDC on 5-pin terminal block - 10÷30VDC on 10-pin terminal block
Power consumption (typical) - - 7W 10W - 2.2W
Overload current protection - - present present - -
Reverse polarity protection - - present on terminal block - - -
Protection
Short Circuit Protection - present - - - -
Over Load Protection - present - - - -
Overload - - - - 110%÷150% rated output power,
protection type - constant current limiting - recovers automatically after fault condition is removed
-
Overvoltage - - - - 56÷65V,
protection type - shut down o/p voltage & re-power on to recover
-
Over temperature - - - - 95°C ±5°C (TSW1) detect on heatsink of power transistor,
protection type - shut down o/p voltage & re-power on to recover
-
Regulatory approvals
EMC - CE EMC (EN 55024,
EN 55032),
FCC Part 15 B,
EN 50155(EN 50121-1,
EN 50121-3-2)
- - - -
EMI - EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
FCC Part 15,
CISPR (EN55022) class A
FCC Part 15,
CISPR (EN55032) class A
- FCC Part 15,
CISPR (EN55022) class A
EMS - IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),
IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
- EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock - IEC60068-2-27 IEC60068-2-27 IEC60068-2-27 - IEC60068-2-27
Free Fall - IEC60068-2-31 IEC60068-2-32 IEC60068-2-31 - IEC60068-2-32
Vibration - IEC60068-2-6 IEC60068-2-6 IEC60068-2-6 - IEC60068-2-6
Safety - EN60950-1 EN60950 - - EN60950
Other - EN 50155 - - - -
MTBF - 2,761,341 hrs. - >400,000 Hours - -
Safety & EMC
Safety standards - - - - UL508,
UL60950-1,
TUV EN60950-1
-
Withstand voltage - - - - I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVAC
-
Isolation resistance - - - - I/P-O/P 100MΩ/500VDC,
I/P-FG 100MΩ/500VDC,
O/P-FG 100MΩ/500VDC
-
EMI conduction & radiation - - - - EN55011,
EN55022 (CISPR22),
EN61204-3 Class B
-
Harmonic current - - - - EN61000-3-2,
EN61000-3-3
-
EMS immunity - - - - EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-2 (EN50082-2),
heavy industry level criteria A
-
Technology
Ethernet Standards - - IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
IEE
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protoc
- -
MAC Table - - 2048 MAC addresses 8192 MAC addresses - -
Priority Queues - - 4 8 - -
Processing - - Store-and-Forward Store-and-Forward - -
VLAN - - Port Based - - -
Switching latency - - - 7 µs - -
Switching bandwidth - - 1.0 Gbps 18 Gbps - -
Max. Number of Available VLANs - - - 4096 - -
IGMP multicast groups - - - 128 for each VLAN - -
Port rate limiting - - - User Define - -
Security Features - - Enable/disable ports,
VLAN to segregate and secure network traffic
Dynamic ARP inspection,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access
- -
Software Features - - STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast
- -
Network Redundancy - - STP,
RSTP,
O-Ring
STP,
RSTP,
MSTP,
O-Ring
- -
DDM Function - - - Voltage,
Current,
Temperature
- -
Warranty
Warranty period - 5 years 5 years 5 years - 2 years
Net Price 8,60 EUR 328,00 EUR 565,00 EUR 460,00 EUR 48,60 EUR 103,00 EUR

« return to products list