This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 18 April
[Log In]
Items tagged as:

PoE
  • Communication for industry
    • Industrial Switches
      • » PoE SWITCHES SMART OR MANAGED
          #07996

          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)

          IPS-3082GC-24V is managed redundant ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-3082GC-24V supports wide range 24~36VDC power inputs and generates 48VDC P.S.E. power output per port. Each IPS-3082GC-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC-24V support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All function of IPS-3082GC-24V can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
          1000 COMBO with SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 5.6 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          SNTP for synchronizing of clocks over network,
          Support PTP Client (Precision Time Protocol) clock synchronization,
          DHCP Server / Client support,
          Support ModbusTCP,
          Port Trunk support,
          MVR (Multicast VLAN Registration) support
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power /PoE Indicator Green - Ready LED x 3,
          Green - PoE LED x 8
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for Duplex/Collision
          1000X / Fiber port indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block
          Power consumption (typical) 11.52W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1260g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)
          for special orders only
          Net Price: 982,00 EUR
          product card»
          #08849

          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)

          IPS-3082GC-AT is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With complete support of Ethernet redundancy protocols, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS-3082GC switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC supports new a DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All functions of IPS-3082GC can be managed centralizedly by a powerful windows utility — Open-Vision. In addition, the wide operating temperature, range from -40 to 70°C, can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application with PoE function.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
          1000 COMBO with SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 5.6 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          SNTP for synchronizing of clocks over network,
          Support PTP Client (Precision Time Protocol) clock synchronization,
          DHCP Server / Client support,
          Support ModbusTCP,
          Port Trunk support,
          MVR (Multicast VLAN Registration) support
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power /PoE Indicator Green - Ready LED x 3,
          Green - PoE LED x 8
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for Duplex/Collision
          1000X / Fiber port indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50÷57VDC on 6-pin terminal block
          Power consumption (typical) 7.68W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1185g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)
          for special orders only
          Net Price: 659,00 EUR
          product card»
          #07656

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)

          IGPS-9084GP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.),
          IEEE 1588-2002
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
          Weight 1205g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)
          for special orders only
          Net Price: 1 160,00 EUR
          product card»
          #06521

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-60W)

          IGPS-9084GP-60W is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) 60Watts P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP-60W switch has 8x10/100/1000Base-T(X) 60Watts P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-60W can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE++ specification (up to 60 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Throughput (packet per second) 14.8Mpps@64Bytes packet
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Budget 240 Watts
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
          Weight 1290g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-60W)
          for special orders only
          Net Price: 1 260,00 EUR
          product card»
          #06520

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)

          IGPS-9084GP-LA is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Throughput (packet per second) 17.856Mpps@64Bytes
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Budget 240 Watts
          Hi-POT 1.5KV AC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
          Weight 779g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          MTBF 516416hrs
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)
          Net Price: 677,00 EUR
          product card»
          #07640

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)

          RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.


          RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 °C to 75 °C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE): 8 (-40 ~ 60oC : provided total 240watts maximum, 60 ~ 75oC : provided total 120watts maximum)
          1000 SFP: 4
          RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (115200bps 8 N 1) (support backup unit DBU-01)
          Technology
          Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base-FX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
          MAC Table: 8192 MAC addresses
          Priority Queues: 4
          Processing: Store-and-Forward
          Switching latency: 7 µs
          Switching bandwidth: 24 Gbps
          Max. Number of Available VLANs: 256
          IGMP multicast groups: 128/VLAN
          Port rate limiting: User Define
          Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
          Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP, NTP server
          Network Redundancy: STP, RSTP, O-Ring, MSTP
          LED Indicators
          Ring Master indicator: Green - indicates system operated in O-Ring Master mode
          Fault indicator: Amber - Indicates unexpected event occurred
          10/100TX RJ45 port indicator: Green for port Link/Act, Amber for Duplex/Collision
          10/100/1000TX RJ45 port indicator: Green for port Link/Act, Amber for 100Mbps
          Fiber port indicator: Green for port Link/Act
          PoE indicator: Blue PoE LED x 8
          Power
          Input power: 100~240VAC, 50~60Hz (power supply included)
          Power consumption (typical): 260Watts (Typ.)
          Overload current protection: present
          Physical Characteristic
          Enclosure: IP-30
          Dimension (W x D x H): 443.7 x 230 x 44 mm
          Weight: 3730 g
          Environmental
          Storage Temperature: -40÷85°C(-40÷185°F)
          Operating Temperature: -40÷70°C (-40÷158°F)
          Operating Humidity: 5%÷95% Non-condensing
          Regulatory approvals
          EMI: FCC Part 15, CISPR (EN55022) class A
          EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
          Shock: IEC60068-2-27
          Free Fall: IEC60068-2-32
          Vibration: IEC60068-2-6
          Safety: EN60950
          Warranty
          Warranty period: 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)
          Net Price: 955,00 EUR
          product card»
          #07976

          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)

          ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1000 SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green Power LED x 3
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Output 50 ~ 57VDC total power budget is 240Watts with maximum 30Watts per port
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
          Weight 1270g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)
          for special orders only
          Net Price: 1 260,00 EUR
          product card»
          #07977

          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)

          ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1000 SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green Power LED x 3
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Output 12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port,
          24 ~ 57VDC - total power budget is 120Watts with
          maximum 30Watts per port
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
          Weight 1270g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)
          for special orders only
          Net Price: 1 410,00 EUR
          product card»
          #07980

          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)

          RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
          Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act
          Fiber port indicator Green for port Link/Act
          PoE indicator Green PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 450 Watts power supply included (320W power budget)
          Power consumption (typical) 37Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 5000 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)
          for special orders only
          Net Price: 1 800,00 EUR
          product card»
          #07981

          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-P)

          RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
          Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act
          Fiber port indicator Green for port Link/Act
          PoE indicator Green PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 1000 Watts power supply included (720W power budget)
          Power consumption (typical) 37Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 5730 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-P)
          for special orders only
          Net Price: 2 100,00 EUR
          product card»
          #07986

          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-LP)

          RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
          1G/10GBase-X with SFP+ port 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 128 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          MSTP (RSTP/STP compatible),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client,
          DHCP Relay,
          Modbus TCP,
          DNS client proxy,
          SMTP Client
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator 1G/10G Green for port Link/Act
          PoE indicator Blue PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 400W
          Power consumption (typical) 75Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431 x 342 x 44 mm
          Weight 6520 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-LP)
          for special orders only
          Net Price: 2 820,00 EUR
          product card»
          #07985

          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)

          RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
          1G/10GBase-X with SFP+ port 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 128 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          MSTP (RSTP/STP compatible),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client,
          DHCP Relay,
          Modbus TCP,
          DNS client proxy,
          SMTP Client
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator 1G/10G Green for port Link/Act
          PoE indicator Blue PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 1000 Watts power supply included (-40 ~ 55°C PoE output 720W Max.,
          55 ~ 60°C PoE output 360W Max.)
          Power consumption (typical) 75Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431 x 342 x 44 mm
          Weight 6520 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)
          for special orders only
          Net Price: 3 160,00 EUR
          product card»
          #07920

          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)

          IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          RSTP/MSTP (IEEE 802.1w/s),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          Voice VLAN,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client/snooping,
          DHCP Relay,
          Modbus TCP,
          ARP inspection,
          SMTP Client
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green - Power LED x 2
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Green for Link/Act indicator,
          Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 19Watts (PoE output not included)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm
          Weight 1560g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)
          for special orders only
          Net Price: 1 410,00 EUR
          product card»
          #06589

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms (ORing IPS-2042TX)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 696g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms (ORing IPS-2042TX)
          for special orders only
          Net Price: 457,00 EUR
          product card»
          #06590

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)
          for special orders only
          Net Price: 584,00 EUR
          product card»
          #07646

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x100Base-FX SFP ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100 Base-FX SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.2mm x 106.1mm x 145.4mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)
          Net Price: 491,00 EUR
          product card»
          #06592

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)
          for special orders only
          Net Price: 641,00 EUR
          product card»
      • » PoE SWITCHES UNMANAGED
          #07990

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)

          PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.78W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 395g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)
          for special orders only
          Net Price: 398,00 EUR
          product card»
          #07992

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)

          IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
          Power consumption (typical) 6.78W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 530g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)
          for special orders only
          Net Price: 461,00 EUR
          product card»
          #07993

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

          IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
          Power consumption (typical) 5.6W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 530g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)
          for special orders only
          Net Price: 520,00 EUR
          product card»
          #07991

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

          PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 5.6W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 395g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)
          for special orders only
          Net Price: 430,00 EUR
          product card»
          #07972

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GP-24V)

          IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GP-24V)
          for special orders only
          Net Price: 441,00 EUR
          product card»
          #07971

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

          IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.3W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷185°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)
          for special orders only
          Net Price: 393,00 EUR
          product card»
          #08432

          Unmanaged switch, 4x 10/100/1000 RJ-45 PoE, Gigabit PoE Ethernet, PCIe slot (ORing IGPCS-E140)

          IGPCS-E140 is a PCI-Express unmanaged Gigabit PoE Ethernet switch card with P.S.E. function, IGPCS-E140 supports 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE port. IGPCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. Therefore, IGPCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.
          Physical Ports
          10/100/1000Base-T(X) Ports in RJ45 With P.S.E. 4
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (total power budget is 65Watts with maximum 30Watts per port)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 1
          PoE Power Indicator Green - PoE power LED x 1
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Green for port Link/Act,
          Green for PoE power injected.
          Power
          Input power PCIe bus-powered(for switch card system) / 12VDC of ATX power(for PoE)
          Power consumption (typical) 4.2 W (power device not included)
          PoE output power IEEE802.3at/af compliant,
          up to 30 Watts per port,
          totally 65 Watts maximum
          Overload current protection present
          Physical Characteristic
          Dimension (WxDxH) 21.3mm x 178mm x 121mm
          Weight 150g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (14÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Operating System Supports
          Microsoft System DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8
          Unix (Linux) Linux for Kernel 3.x / 2.6.x / 2.4.x,
          FreeBSD for 7.x / 8.0,
          SCO OpenServer for 6 / UnixWare 7.1.x
          Novell Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x)
          Others MacOS 10.4 / 10.5 / 10.6 / 10.7
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100/1000 RJ-45 PoE, Gigabit PoE Ethernet, PCIe slot (ORing IGPCS-E140)
          for special orders only
          Net Price: CallCall
          product card»
          #07645

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

          IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps indicator
          100/1000Base-X port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
          Power consumption (typical) 6.2W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
          Weight 407 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)
          for special orders only
          Net Price: 365,00 EUR
          product card»
          #08433

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

          IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps Indicator
          100/1000Base-X SFP port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
          Weight 580 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)
          for special orders only
          Net Price: 420,00 EUR
          product card»
          #07989

          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

          IPS-1080 is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 2x 12~57VDC on 6-pin terminal block
          Power consumption (typical) 4.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 412g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)
          Net Price: 398,00 EUR
          product card»
          #07988

          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

          IPS-1080A is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50VDC on 6-pin terminal block
          Power consumption (typical) 4.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 412g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)
          Net Price: 318,00 EUR
          product card»
          #06517

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 889g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)
          Net Price: 609,00 EUR
          product card»
          #06518

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 60W at 12~24VDC,
          120W at 24~57VDC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 916g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)
          for special orders only
          Net Price: 677,00 EUR
          product card»
          #07642

          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080-24V)

          IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
          Green and Amber on for 100Mbit,
          Amber on only for 10Mbit
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block.
          Power consumption (typical) 7,8W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41(W) x 94.9(D) x 144.3(H) mm
          Weight 452 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080-24V)
          Net Price: 414,00 EUR
          product card»
          #08166

          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080A)

          IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

          IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50VDC on 6-pin terminal block
          Power consumption (typical) 8W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 390g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080A)
          Net Price: 400,00 EUR
          product card»
      • » GIGABIT ETHERNET / MANAGED SWITCHES
          #07919

          Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP-E)

          RGS-92222GCP-NP series are Gigabit managed redundant ring Ethernet switch with 22x10/100/1000Base-T(X) copper ports and 2xGigabit combo ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 22
          Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 2
          100/1000Base-X with SFP ports 2
          RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
          8,
          N,
          1
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Device Binding security feature,
          Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          Single 802.1x and Multiple 802.1x,
          MAC-based authentication,
          QoS assignment,
          Guest VLAN,
          MAC address limit,
          TACACS+,
          VLAN (802.1Q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security,
          Https / SSH enhance network security,
          Web and CLI authentication and authorization,
          Authorization (15 levels),
          IP source guard
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP(RSTP/STP compatible),
          Fast Recovery
          LED Indicators
          Power Indicator Green LED x 3 Power indicator for AC and DC
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicate unexpected event occurred
          10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
          Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
          100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
          Fault Contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power 100~240VAC with power cord,
          and dual 48VDC(36~72VDC) power inputs at 6-pin terminal block
          Power consumption (typical) 23W
          Overload current protection present
          Reverse Polarity Protection Present on DC only
          Physical Characteristic
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 4360g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40 to 75 °C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP-E)
          for special orders only
          Net Price: 1 580,00 EUR
          product card»


top

$ €