This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 25 April
[Log In]
Items tagged as:

PoE
  • Communication for industry
    • Industrial Switches
      • » PoE SWITCHES SMART OR MANAGED
          #07996

          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)

          IPS-3082GC-24V is managed redundant ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-3082GC-24V supports wide range 24~36VDC power inputs and generates 48VDC P.S.E. power output per port. Each IPS-3082GC-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC-24V support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All function of IPS-3082GC-24V can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
          1000 COMBO with SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 5.6 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          SNTP for synchronizing of clocks over network,
          Support PTP Client (Precision Time Protocol) clock synchronization,
          DHCP Server / Client support,
          Support ModbusTCP,
          Port Trunk support,
          MVR (Multicast VLAN Registration) support
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power /PoE Indicator Green - Ready LED x 3,
          Green - PoE LED x 8
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for Duplex/Collision
          1000X / Fiber port indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block
          Power consumption (typical) 11.52W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1260g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)
          for special orders only
          Net Price: 982,00 EUR
          product card»
          #08849

          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)

          IPS-3082GC-AT is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With complete support of Ethernet redundancy protocols, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS-3082GC switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC supports new a DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All functions of IPS-3082GC can be managed centralizedly by a powerful windows utility — Open-Vision. In addition, the wide operating temperature, range from -40 to 70°C, can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application with PoE function.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
          1000 COMBO with SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 5.6 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          SNTP for synchronizing of clocks over network,
          Support PTP Client (Precision Time Protocol) clock synchronization,
          DHCP Server / Client support,
          Support ModbusTCP,
          Port Trunk support,
          MVR (Multicast VLAN Registration) support
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power /PoE Indicator Green - Ready LED x 3,
          Green - PoE LED x 8
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for Duplex/Collision
          1000X / Fiber port indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50÷57VDC on 6-pin terminal block
          Power consumption (typical) 7.68W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1185g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)
          for special orders only
          Net Price: 659,00 EUR
          product card»
          #07656

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)

          IGPS-9084GP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.),
          IEEE 1588-2002
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
          Weight 1205g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)
          for special orders only
          Net Price: 1 160,00 EUR
          product card»
          #06521

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-60W)

          IGPS-9084GP-60W is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) 60Watts P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP-60W switch has 8x10/100/1000Base-T(X) 60Watts P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-60W can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE++ specification (up to 60 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Throughput (packet per second) 14.8Mpps@64Bytes packet
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Budget 240 Watts
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
          Weight 1290g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-60W)
          for special orders only
          Net Price: 1 260,00 EUR
          product card»
          #06520

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)

          IGPS-9084GP-LA is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Throughput (packet per second) 17.856Mpps@64Bytes
          Max. Number of Available VLANs 256
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Budget 240 Watts
          Hi-POT 1.5KV AC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
          Weight 779g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          MTBF 516416hrs
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)
          Net Price: 677,00 EUR
          product card»
          #07640

          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)

          RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.


          RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 °C to 75 °C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE): 8 (-40 ~ 60oC : provided total 240watts maximum, 60 ~ 75oC : provided total 120watts maximum)
          1000 SFP: 4
          RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (115200bps 8 N 1) (support backup unit DBU-01)
          Technology
          Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base-FX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
          MAC Table: 8192 MAC addresses
          Priority Queues: 4
          Processing: Store-and-Forward
          Switching latency: 7 µs
          Switching bandwidth: 24 Gbps
          Max. Number of Available VLANs: 256
          IGMP multicast groups: 128/VLAN
          Port rate limiting: User Define
          Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
          Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP, NTP server
          Network Redundancy: STP, RSTP, O-Ring, MSTP
          LED Indicators
          Ring Master indicator: Green - indicates system operated in O-Ring Master mode
          Fault indicator: Amber - Indicates unexpected event occurred
          10/100TX RJ45 port indicator: Green for port Link/Act, Amber for Duplex/Collision
          10/100/1000TX RJ45 port indicator: Green for port Link/Act, Amber for 100Mbps
          Fiber port indicator: Green for port Link/Act
          PoE indicator: Blue PoE LED x 8
          Power
          Input power: 100~240VAC, 50~60Hz (power supply included)
          Power consumption (typical): 260Watts (Typ.)
          Overload current protection: present
          Physical Characteristic
          Enclosure: IP-30
          Dimension (W x D x H): 443.7 x 230 x 44 mm
          Weight: 3730 g
          Environmental
          Storage Temperature: -40÷85°C(-40÷185°F)
          Operating Temperature: -40÷70°C (-40÷158°F)
          Operating Humidity: 5%÷95% Non-condensing
          Regulatory approvals
          EMI: FCC Part 15, CISPR (EN55022) class A
          EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
          Shock: IEC60068-2-27
          Free Fall: IEC60068-2-32
          Vibration: IEC60068-2-6
          Safety: EN60950
          Warranty
          Warranty period: 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)
          Net Price: 955,00 EUR
          product card»
          #07976

          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)

          ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1000 SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green Power LED x 3
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Output 50 ~ 57VDC total power budget is 240Watts with maximum 30Watts per port
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
          Weight 1270g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)
          for special orders only
          Net Price: 1 260,00 EUR
          product card»
          #07977

          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)

          ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1000 SFP 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus TCP
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green Power LED x 3
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block
          Power consumption (typical) 13.2Watts (power device not included)
          PoE Power Output 12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port,
          24 ~ 57VDC - total power budget is 120Watts with
          maximum 30Watts per port
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
          Weight 1270g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)
          for special orders only
          Net Price: 1 410,00 EUR
          product card»
          #07980

          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)

          RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
          Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act
          Fiber port indicator Green for port Link/Act
          PoE indicator Green PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 450 Watts power supply included (320W power budget)
          Power consumption (typical) 37Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 5000 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)
          for special orders only
          Net Price: 1 800,00 EUR
          product card»
          #07981

          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-P)

          RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
          Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act
          Fiber port indicator Green for port Link/Act
          PoE indicator Green PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 1000 Watts power supply included (720W power budget)
          Power consumption (typical) 37Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 5730 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-P)
          for special orders only
          Net Price: 2 100,00 EUR
          product card»
          #07986

          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-LP)

          RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
          1G/10GBase-X with SFP+ port 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 128 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          MSTP (RSTP/STP compatible),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client,
          DHCP Relay,
          Modbus TCP,
          DNS client proxy,
          SMTP Client
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator 1G/10G Green for port Link/Act
          PoE indicator Blue PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 400W
          Power consumption (typical) 75Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431 x 342 x 44 mm
          Weight 6520 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-LP)
          for special orders only
          Net Price: 2 820,00 EUR
          product card»
          #07985

          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)

          RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
          1G/10GBase-X with SFP+ port 4
          RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
          8,
          N,
          1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 128 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128/VLAN
          Port rate limiting User Define
          Security Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          MSTP (RSTP/STP compatible),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client,
          DHCP Relay,
          Modbus TCP,
          DNS client proxy,
          SMTP Client
          Network Redundancy STP,
          RSTP,
          O-Ring,
          MSTP
          LED Indicators
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator 1G/10G Green for port Link/Act
          PoE indicator Blue PoE LED x 24
          Power
          Input power 100~240VAC with power socket
          Power supply 1000 Watts power supply included (-40 ~ 55°C PoE output 720W Max.,
          55 ~ 60°C PoE output 360W Max.)
          Power consumption (typical) 75Watts (Typ.)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 431 x 342 x 44 mm
          Weight 6520 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)
          for special orders only
          Net Price: 3 160,00 EUR
          product card»
          #07920

          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)

          IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
          100/1000 SFP 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Max. Number of Available VLANs 256
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features Hardware routing,
          RIP and static routing,
          IEEE 1588v2 clock synchronization,
          IEEE 802.1D Bridge,
          auto MAC address learning/aging and MAC address (static),
          Multiple Registration Protocol (MRP),
          RSTP/MSTP (IEEE 802.1w/s),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging,
          Voice VLAN,
          IGMP v2/v3 Snooping,
          IP-based bandwidth management,
          Application-based QoS management,
          DOS/DDOS auto prevention,
          Port configuration,
          status,
          statistics,
          monitoring,
          security,
          DHCP Server/Client/snooping,
          DHCP Relay,
          Modbus TCP,
          ARP inspection,
          SMTP Client
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP (RSTP/STP compatible)
          LED Indicators
          Power Indicator (PWR) Green - Power LED x 2
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Ring Indicator Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicates unexpected event occurred
          100/1000Base-X SFP Port Indicator Green for port Link/Act.
          10/100/1000TX RJ45 port indicator Green for Link/Act indicator,
          Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
          PoE indicator Green - PoE enabled LED x 8
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 19Watts (PoE output not included)
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm
          Weight 1560g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)
          for special orders only
          Net Price: 1 410,00 EUR
          product card»
          #06589

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms (ORing IPS-2042TX)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 696g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms (ORing IPS-2042TX)
          for special orders only
          Net Price: 457,00 EUR
          product card»
          #06590

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)
          for special orders only
          Net Price: 584,00 EUR
          product card»
          #07646

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x100Base-FX SFP ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100 Base-FX SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.2mm x 106.1mm x 145.4mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)
          Net Price: 491,00 EUR
          product card»
          #06592

          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)

          IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
          100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
          IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          O-Ring
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Yellow - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fiber port indicator Green for port Link/Act,
          Yellow for Link
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
          12÷45VDC on power jack
          Power consumption (typical) 7W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 52mm x 106mm x 144mm
          Weight 709g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)
          for special orders only
          Net Price: 641,00 EUR
          product card»
      • » PoE SWITCHES UNMANAGED
          #07990

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)

          PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.78W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 395g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)
          for special orders only
          Net Price: 398,00 EUR
          product card»
          #07992

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)

          IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
          Power consumption (typical) 6.78W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 530g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)
          for special orders only
          Net Price: 461,00 EUR
          product card»
          #07993

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

          IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
          Power consumption (typical) 5.6W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 530g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)
          for special orders only
          Net Price: 520,00 EUR
          product card»
          #07991

          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

          PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          100Base-FX Fiber Port Indicator Green for port Link/Act.
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 5.6W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 395g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)
          for special orders only
          Net Price: 430,00 EUR
          product card»
          #07972

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GP-24V)

          IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GP-24V)
          for special orders only
          Net Price: 441,00 EUR
          product card»
          #07971

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

          IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.3W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷185°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)
          for special orders only
          Net Price: 393,00 EUR
          product card»
          #08432

          Unmanaged switch, 4x 10/100/1000 RJ-45 PoE, Gigabit PoE Ethernet, PCIe slot (ORing IGPCS-E140)

          IGPCS-E140 is a PCI-Express unmanaged Gigabit PoE Ethernet switch card with P.S.E. function, IGPCS-E140 supports 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE port. IGPCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. Therefore, IGPCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.
          Physical Ports
          10/100/1000Base-T(X) Ports in RJ45 With P.S.E. 4
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (total power budget is 65Watts with maximum 30Watts per port)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 1
          PoE Power Indicator Green - PoE power LED x 1
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Green for port Link/Act,
          Green for PoE power injected.
          Power
          Input power PCIe bus-powered(for switch card system) / 12VDC of ATX power(for PoE)
          Power consumption (typical) 4.2 W (power device not included)
          PoE output power IEEE802.3at/af compliant,
          up to 30 Watts per port,
          totally 65 Watts maximum
          Overload current protection present
          Physical Characteristic
          Dimension (WxDxH) 21.3mm x 178mm x 121mm
          Weight 150g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (14÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Operating System Supports
          Microsoft System DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8
          Unix (Linux) Linux for Kernel 3.x / 2.6.x / 2.4.x,
          FreeBSD for 7.x / 8.0,
          SCO OpenServer for 6 / UnixWare 7.1.x
          Novell Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x)
          Others MacOS 10.4 / 10.5 / 10.6 / 10.7
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100/1000 RJ-45 PoE, Gigabit PoE Ethernet, PCIe slot (ORing IGPCS-E140)
          for special orders only
          Net Price: CallCall
          product card»
          #07645

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

          IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps indicator
          100/1000Base-X port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
          Power consumption (typical) 6.2W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
          Weight 407 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)
          for special orders only
          Net Price: 365,00 EUR
          product card»
          #08433

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

          IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps Indicator
          100/1000Base-X SFP port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
          Weight 580 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)
          for special orders only
          Net Price: 420,00 EUR
          product card»
          #07989

          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

          IPS-1080 is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 2x 12~57VDC on 6-pin terminal block
          Power consumption (typical) 4.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 412g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)
          Net Price: 398,00 EUR
          product card»
          #07988

          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

          IPS-1080A is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50VDC on 6-pin terminal block
          Power consumption (typical) 4.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 412g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)
          Net Price: 318,00 EUR
          product card»
          #06517

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 889g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)
          Net Price: 609,00 EUR
          product card»
          #06518

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 60W at 12~24VDC,
          120W at 24~57VDC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 916g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)
          for special orders only
          Net Price: 677,00 EUR
          product card»
          #07642

          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080-24V)

          IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
          Green and Amber on for 100Mbit,
          Amber on only for 10Mbit
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block.
          Power consumption (typical) 7,8W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41(W) x 94.9(D) x 144.3(H) mm
          Weight 452 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080-24V)
          Net Price: 414,00 EUR
          product card»
          #08166

          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080A)

          IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

          IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 2048 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator Green for port Link/Act.,
          Green for PoE power injected
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50VDC on 6-pin terminal block
          Power consumption (typical) 8W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 390g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080A)
          Net Price: 400,00 EUR
          product card»
      • » GIGABIT ETHERNET / MANAGED SWITCHES
          #07919

          Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP-E)

          RGS-92222GCP-NP series are Gigabit managed redundant ring Ethernet switch with 22x10/100/1000Base-T(X) copper ports and 2xGigabit combo ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 22
          Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 2
          100/1000Base-X with SFP ports 2
          RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
          8,
          N,
          1
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.z for 1000Base-X,
          IEEE 802.3ae for 10Gigabit Ethernet,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 52 Gbps
          IGMP multicast groups 256 for each VLAN
          Port rate limiting User Define
          Security Features Device Binding security feature,
          Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          Single 802.1x and Multiple 802.1x,
          MAC-based authentication,
          QoS assignment,
          Guest VLAN,
          MAC address limit,
          TACACS+,
          VLAN (802.1Q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security,
          Https / SSH enhance network security,
          Web and CLI authentication and authorization,
          Authorization (15 levels),
          IP source guard
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          O-Chain,
          MRP,
          MSTP(RSTP/STP compatible),
          Fast Recovery
          LED Indicators
          Power Indicator Green LED x 3 Power indicator for AC and DC
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
          Green Blinking - Indicates that the Ring is broken.
          Fault indicator Amber - Indicate unexpected event occurred
          10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
          Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
          100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
          Fault Contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power 100~240VAC with power cord,
          and dual 48VDC(36~72VDC) power inputs at 6-pin terminal block
          Power consumption (typical) 23W
          Overload current protection present
          Reverse Polarity Protection Present on DC only
          Physical Characteristic
          Dimension (W x D x H) 431mm x 342mm x 44mm
          Weight 4360g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40 to 75 °C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Warranty
          Warranty period 5 years
          Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP-E)
          for special orders only
          Net Price: 1 580,00 EUR
          product card»
    • Industrial Media Converters
      • » GIGABIT ETHERNET MEDIA CONVERTERS
          #07964

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)

          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          1000Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
          Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
          Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Amber for P.S.E. indicator
          Power
          Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) 4 Watts (P.S.E. output included)
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 40mm x 70mm x 95mm
          Weight 291g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷75°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Recommended power supply: #06676 Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)
          Net Price: 262,00 EUR
          product card»
          #06631

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP-BT-24V)

          The IGPMC-111GP-BT-24V is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP-BT-24V supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP-BT-24V also support Power over Ethernet, a system to transmit electrical power up to 90 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP-BT-24V has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup.

          The IGPMC-111GP-BT-24V also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP-BT-24V will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

          The IGPMC-111GP-BT-24V with wide operating temperature range from -40 ~ 75oC and accepts a wide voltage range from dual 12~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP-BT-24V is reliable media converter with PoE capability and can satisfy most demand of operating environment.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          1000Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100/1000TX RJ45 port indicator Green for Link/Act,
          Speed LED– Green for 1000Mbps, Off-light for 100/10Mbps
          100/1000Base-FX fiber port indicator Green for port Link/Act
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Amber for P.S.E. indicator
          Power
          Input power Dual 12~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) IEEE 802.3at(30W) mode - 12VDC,
          IEEE 802.3bt( 60/90W) mode - 24VDC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 41mm x 70mm x 95mm
          Weight 300g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷75°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          EMI FEN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15 B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD Contact 4KV,
          Air 8KV),
          IEC/EN 61000-4-3 (RS 3V),
          IEC/EN 61000-4-4 (EFT Power 0.5KV,
          Signal 0.5KV),
          IEC/EN 61000-4-5 (Surge Power 0.5KV,
          RJ45 1KV),
          IEC/EN 61000-4-6 (CS 3V),
          IEC/EN 61000-4-8(PFMF)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          Safety EN 62368-1
          MTBF 1,183,306hrs
          Warranty
          Warranty period 5 years
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP-BT-24V)
          for special orders only
          Net Price: 332,00 EUR
          product card»
      • » INJECTORS
          #06523

          Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing INJ-101GT++-60W)

          The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.
          Physical Ports
          10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1
          10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1
          Operating Voltage
          Input Voltage 50 ~ 57 VDC / 4-pin terminal block
          Power Consumption 1 Watts (Not include PD's device)
          PoE Power Budget 60 Watts max
          LED Indicators
          Power indicator PWR / Ready 1 x LED,
          Green On - Power is on and functioning Normally
          PoE Indicators 1 x LED,
          Blue On - PoE Device Link,
          Blue Off - None PoE Device Detected,
          Blink (Blue) - Overload present
          Protection
          Short Circuit Protection present
          Over Load Protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
          Weight 188g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷165°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing INJ-101GT++-60W)
          for special orders only
          Net Price: 226,00 EUR
          product card»
          #08446

          Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT)

          The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
          Physical Ports
          10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
          10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
          Operating Voltage
          Input Voltage 50 ~ 57 VDC / 4-pin terminal block
          Output Power 50V / 600mA,
          30 Watts max. Per port
          LED Indicators
          Power indicator PWR / Ready 1 x LED,
          Green On - Power is on and functioning Normally
          PoE Indicators 2 x LED,
          Blue On - PoE Device Link,
          Blue Blinking - Detecting PoE Device,
          Blue Off - None PoE Device Detected
          Protection
          Short Circuit Protection present
          Over Load Protection present
          High Voltage Protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 70mm x 95mm
          Weight 250g
          Environmental
          Storage Temperature -40÷80°C(-40÷176°F)
          Operating Temperature -20÷70°C (-4÷158°F)
          Operating Humidity 5%÷90% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 2 years
          Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT)
          for special orders only
          Net Price: 112,00 EUR
          product card»
          #08447

          Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT-24V)

          The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
          Physical Ports
          10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
          10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
          Operating Voltage
          Input Voltage 24 ~ 57 VDC / 4-pin terminal block
          Output Power 50V / 600mA,
          30 Watts max. Per port
          LED Indicators
          Power indicator PWR / Ready 1 x LED,
          Green On - Power is on and functioning Normally
          PoE Indicators 2 x LED,
          Blue On - PoE Device Link,
          Blue Blinking - Detecting PoE Device,
          Blue Off - None PoE Device Detected
          Protection
          Short Circuit Protection present
          Over Load Protection present
          High Voltage Protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 70mm x 95mm
          Weight 370g
          Environmental
          Storage Temperature -40÷80°C(-40÷176°F)
          Operating Temperature -20÷70°C (-4÷158°F)
          Operating Humidity 5%÷90% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 2 years
          Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT-24V)
          for special orders only
          Net Price: 206,00 EUR
          product card»
    • Transporter EN50155 Devices
        #06506

        Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V)

        ORing’s Transporter series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101GT-M12-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100/1000 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101GT-M12-24V EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101GT-M12-24V PoE Injector. Typically, in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The TINJ-101GT-M12-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
        Physical Ports
        10/100/1000 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
        10/100/1000 Base-T(X) Port in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
        Operating Voltage
        Input Voltage Railway 24VDC (12 ~ 57 VDC) on 5-pin M12 female A-coding
        Output Power 50V / 600mA,
        30 Watts max. Per port
        LED Indicators
        Power indicator PWR / Ready 1 x LED,
        Green On - Power is on and functioning Normally
        PoE Indicators 1 x LED,
        Blue On - PoE Device Link,
        Blue Blinking - Detecting PoE Device,
        Blue Off - None PoE Device Detected
        Protection
        Short Circuit Protection present
        Over Load Protection present
        Physical Characteristic
        Enclosure IP-40
        Dimension (W x D x H) 88.9 x 40 x 178.2 mm
        Weight 446g
        Environmental
        Storage Temperature -40÷80°C(-40÷176°F)
        Operating Temperature -25÷75°C (-13÷167°F)
        Operating Humidity 5%÷90% Non-condensing
        Regulatory approvals
        EMC CE EMC (EN 55024,
        EN 55032),
        FCC Part 15 B,
        EN 50155(EN 50121-1,
        EN 50121-3-2)
        EMI EN 55032,
        CISPR32,
        EN 61000-3-2,
        EN 61000-3-3,
        FCC Part 15 B class A
        EMS IEC/EN 61000-4-2 (ESD),
        IEC/EN 61000-4-3 (RS),
        IEC/EN 61000-4-4 (EFT),
        IEC/EN 61000-4-5 (Surge),
        IEC/EN 61000-4-6 (CS),
        IEC/EN 61000-4-8(PFMF),
        IEC/EN 61000-4-11 (DIP))
        Shock IEC60068-2-27
        Free Fall IEC60068-2-31
        Vibration IEC60068-2-6
        Safety EN60950-1
        Other EN 50155
        MTBF 2,761,341 hrs.
        Warranty
        Warranty period 5 years
        Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V)
        for special orders only
        Net Price: 370,00 EUR
        product card»
      • » UNMANAGED SWITCHES
          #07850

          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-24V)

          ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGXPS-1080-M12-24V is an un-managed PoE Ethernet switch with 8x10/100/500/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGXPS-1080-M12-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGXPS-1080-M12-24V switch has 8X10/100/500/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGXPS-1080-M12-24V EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
          While installing in the train, TGXPS-1080-M12-24V is mainly used for in-train monitoring and Entertainment service due to its high speed Gigabit Ethernet
          connection and PoE capability. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TGXPS-1080-M12-24V is not able and will not be used for any control related application. Its main function is simply forwarding the Ethernet packet from one Ethernet based device to another Ethernet device which are all connected to the Switch.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8
          Connector Type M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
          MAC Table 4k
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 3
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator and PoE indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Middle Amber for 500Mbps port Link/Act indicator,
          Bottom blue for PoE Injected indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power Dual 24 (12~57VDC)VDC on 5-pin M23 connector
          Power consumption (typical) 8W
          PoE Output Power 60W (12~24VDC) / 120W (24~57VDC)
          Overload current protection present
          Reverse polarity protection Present
          Physical Characteristic
          Dimension (W x D x H) 125 x 65 x 196 mm
          Weight 979 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC CE EMC (EN 55024,
          EN 55032),
          FCC Part 15B,
          EN 50121-3-2 (EN 50155)
          EMI EN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
          IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
          IEC/EN 61000-4-5 (Surge),
          IEC/EN 61000-4-6 (CS),
          IEC/EN 61000-4-8(PFMF),
          IEC/EN 61000-4-11 (DIP))
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          Safety EN60950-1
          Other EN 50155
          MTBF 442602 hrs
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-24V)
          for special orders only
          Net Price: 825,00 EUR
          product card»
          #07851

          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-MV)

          ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGXPS-1080-M12-MV is an un-managed PoE Ethernet switch with 8x10/100/500/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGXPS-1080-M12-MV also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGXPS-1080-M12-MV switch has 8X10/100/500/1000Base-T(X) IEEE 802.3af/at P.S.E. (Power Sourcing Equipment) ports, but the PoE total power budget is 60Watts Max. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGXPS-1080-M12-MV EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
          While installing in the train, TGXPS-1080-M12-MV is mainly used for in-train monitoring and Entertainment service due to its high-speed Gigabit Ethernet connection and PoE capability. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TGXPS-1080-M12-MV is not able and will not be used for any control related application. Its main function is simply forwarding the Ethernet packet from one Ethernet based device to another Ethernet device which are all connected to the Switch.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
          MAC Table 4k
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 1
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator and PoE indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Middle Amber for 500Mbps port Link/Act indicator,
          Bottom blue for PoE Injected indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power 72/110 (50.4-137.5) VDC on 5-pin 7/8-inch male connector
          Power consumption (typical) 8W
          PoE Output Power 60W (12~24VDC) / 120W (24~57VDC)
          Overload current protection present
          Reverse polarity protection Present
          Physical Characteristic
          Dimension (W x D x H) 150 x 65 x 196 mm
          Weight 1320 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC CE EMC (EN 55024,
          EN 55032),
          FCC Part 15B,
          EN 50121-3-2 (EN 50155)
          EMI EN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
          IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
          IEC/EN 61000-4-5 (Surge),
          IEC/EN 61000-4-6 (CS),
          IEC/EN 61000-4-8(PFMF),
          IEC/EN 61000-4-11 (DIP))
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          Safety EN60950-1
          Other EN 50155
          MTBF 229943 hrs
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-MV)
          for special orders only
          Net Price: 1 440,00 EUR
          product card»
      • » WIRELESS 3G/4G ROUTERS
          #07887

          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-2062+-4GS-M12)

          ORing’s TransporterTM series cellular router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAR-2062-4G-M12 is reliable IEEE802.11 a/b/g/n router with 2 ports LAN which is fully compliant with EN50155 certification. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular modem dial up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem. TGAR-2062-4G-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, TGAR-2062+-4G-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAR-2062-4G-M12 is one of the most reliable choices for rolling stock applications on the wireless network.
          Physical Ports
          10/100/1000 Base-T(X) Ports in M-12 Auto MDI/MDIX 2
          DIDO port in M12 (5-pin A-coding) 2 (DI x 4 and DO x 4)
          SIM Card Slot 2
          RS-232 Console port in M12 115200, 8 ,N ,1
          WLAN interface
          Antenna Connector 2 x External reverse SMA-type antenna connector
          Radio Frequency Type DSSS,
          OFDM
          Modulation IEEE802.11a OFDM with BPSK,
          QPSK,
          QAM,
          64QAM
          Modulation IEEE802.11b CCK,
          DQPSK,
          DBPSK
          Modulation IEEE802.11g OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          Modulation IEEE802.11n BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band America/FCC 2.412~2.462 GHz (11 channels),
          5.180~5.240 GHz & 5.745~5.825 GHz (9 channels),
          Europe CE/ETSI 2.412~2.472 Ghz (13 channels),
          5.180~5.240 GHz (4 channels)
          Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
          IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
          IEEE802.11n UP to 300 Mbps
          Transmit Power 802.11a 12dBm ± 1.5dBm@54Mbps,
          802.11b 17dBm ± 1.5dBm@11Mbps,
          802.11g 16dBm ± 1.5dBm@54Mbps,
          802.11gn HT20 15dBm ± 1.5dBm @MCS7,
          802.11gn HT40 14dBm ± 1.5dBm @MCS7,
          802.11an HT20 -74dBm ± 2dBm@MCS7,
          802.11an HT40 -71dBm ± 2dBm@MCS7
          Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
          802.11g -76dBm ± 2dBm@54Mbps,
          802.11gn HT20 -75dBm ± 2dBm@MCS7,
          802.11gn HT40 -72dBm ± 2dBm@MCS7
          Encryption Security WEP (64-bit ,128-bit key),
          WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
          802.1X/RADIUS Authentication supported,
          WPAPSK (256-bit key pre-shared key supported),
          TKIP encryption
          Wireless Security SSID broadcast disable
          Cellular Interface
          Cellular Standard GSM / GPRS/ EGPRS/EDGE / WCDMA /HSDPA / HSUPA/HSPA+ /LTE
          Antenna Connector 2 x SMA Female
          Band Option America(US) LTE - 700/1700/2100/MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/1900/2100MHz,
          GSM/GPRS/EDGE - 850/900/1800/1900MHz,
          Europe(EU) LTE - 800/900/1800/2100/2600MHz,
          UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 900/2100MHz,
          GSM/GPRS/EDGE - 900/1800/1900MHz
          Protocol Support ARP,
          BOOTP,
          DHCP,
          DNS,
          HTTPs,
          IP,
          ICMP,
          SNTP,
          TCP,
          UDP,
          RADIUS,
          SNMP,
          STP (IEEE 802.1D),
          RSTP
          LED Indicators
          Power Indicator 2 x LEDs,
          (PW1) Green On - Power is on,
          (PW2) Green On - Power is on or power by PoE
          100/1000Base-T(X) M-12 Port Indicator 2 x LEDs,
          Green for port Link/ Act
          WLAN LEDs 1 x LED,
          Green for WLAN Link/ Act
          WAN LED 2 x LED,
          Green for Cellular modem Link/ Act
          Fault 1 x LED,
          Red for Ethernet link down or power down indicator
          Fault Contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Redundant Input Power Dual DC inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
          Power consumption (typical) 15W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 125.6mm x 65mm x 196.1mm
          Weight 1030g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -25÷70°C (-13÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6,
          EN61373
          Rail Traffic EN50155
          Cooling EN60068-2-1
          Dry Heat EN60068-2-2
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-2062+-4GS-M12)
          for special orders only
          Net Price: CallCall
          product card»
    • Wireless Devices
      • » INDUSTRIAL ACCESS POINTS
          #06531

          Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+)

          IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 (one port with PoE)
          PoE PD Port Present at ETH,
          Fully compliant with IEEE 802.3af Power Device specification,
          Over load and short circuit protection,
          Isolation Voltage 1000 VDC min.,
          Isolation Resistance 108MΩ min
          WLAN interface
          Operating Mode AP/Bridge/Bridge/AP-Client
          Antenna Connector 1 x External reverse SMA-type antenna connector
          Radio Frequency Type DSSS,
          OFDM
          Modulation IEEE802.11b CCK,
          DQPSK,
          DBPSK
          Modulation IEEE802.11g/n OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band 2.412~2.472 Ghz (13 channels)
          Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
          IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
          IEEE802.11n UP to 150 Mbps
          Transmit Power 802.11b 19dBm ± 1.5dBm@11Mbps,
          802.11g 17dBm ± 1.5dBm@54Mbps,
          802.11gn HT20 16.5dBm ± 1.5dBm @MCS7,
          802.11n HT40 14.5dBm ± 1.5dBm @MCS7
          Receiver Sensitivity 802.11b -90dBm ± 2dBm@1Mbps,
          802.11g -72dBm ± 2dBm@54Mbps,
          802.11n HT20 -68dBm ± 2dBm@MCS7
          Encryption Security WEP (64-bit ,128-bit key),
          WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
          802.1X/RADIUS Authentication supported
          Wireless Security SSID broadcast disable
          Protocol Support ARP,
          BOOTP,
          DHCP,
          DNS,
          HTTPs,
          IP,
          ICMP,
          SNTP,
          TCP,
          UDP,
          RADIUS,
          SNMP,
          STP (IEEE 802.1D)
          LED Indicators
          Power Indicator LED x 3,
          PWR 1, 2,
          (PoE),
          Green On- Power is on and functioning Normally.
          10/100Base-T(X) RJ45 Port Indicator 2 x LEDs,
          Green for port Link/ Act
          WLAN LEDs LED,
          Green (blinking) for WLAN
          Power
          Redundant Input Power Dual DC inputs. 12~48VDC on 4-pin terminal block
          Power consumption (typical) 4W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41(W)x81(D)x95(H) mm
          Weight 292g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -10÷60°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+)
          for special orders only
          Net Price: 264,00 EUR
          product card»
    • Other accessories
        #07995

        Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT++)

        The INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 24~57VDC power input with boosting circuit, the total output power can be up to 180Watts[Note2] for all ports usage. The installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

        Note1: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).

        Note 2: LTPoE++TM PSE technology is applied on this product. Only when an LTPoE++ TM Powered Device (PD) is attached can the PSE port deliver up to 180W of output power.
        Physical Ports
        10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
        10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
        Operating Voltage
        Input Voltage 50 ~ 57 VDC / 4-pin terminal block
        Output Power 57V / 3157mA,
        180 Watts max. Per port
        LED Indicators
        Power indicator PWR / Ready 1 x LED,
        Green On - Power is on and functioning Normally
        PoE Indicators 2 x LED,
        Blue On - PoE Device Link,
        Blue Off - None PoE Device Detected
        Protection
        Short Circuit Protection present
        Over Load Protection present
        Physical Characteristic
        Enclosure IP-30
        Dimension (W x D x H) 26.1mm x 70mm x 95mm
        Weight 300g
        Environmental
        Storage Temperature -40÷80°C(-40÷176°F)
        Operating Temperature -20÷70°C (-4÷158°F)
        Operating Humidity 5%÷90% Non-condensing
        Regulatory approvals
        EMI FCC Part 15,
        CISPR (EN55022) class A
        EMS EN61000-4-2 (ESD),
        EN61000-4-3 (RS),
        EN61000-4-4 (EFT),
        EN61000-4-5 (Surge),
        EN61000-4-6 (CS),
        EN61000-4-8,
        EN61000-4-11
        Shock IEC60068-2-27
        Free Fall IEC60068-2-32
        Vibration IEC60068-2-6
        Safety EN60950-1
        Warranty
        Warranty period 5 years
        Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT++)
        for special orders only
        Net Price: 206,00 EUR
        product card»
        #07970

        Industrial Gigabit PoE Splitter, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing SPL-101GT)

        SPL-101GT is a high power PoE Splitter for use in Power over Ethernet systems. With Ethernet Input (data + power) port and Output (data only) port, SPL-101GT may split power from existing LAN cable and convert up to 24VDC/1.25A for power hungry applications such as Wireless APs, Security cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented for use as a DC power supply.
        Physical Ports
        10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1
        10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1
        Operating Voltage
        Input Voltage 36 ~ 57 VDC / 4-pin terminal block
        Output Power 24V / 1.25mA,
        30 Watts max. Per port
        LED Indicators
        Power indicator PWR / Ready 1 x LED,
        Blue On - Power is on and is functioning Normally
        Protection
        Short Circuit Protection present
        Over Load Protection present
        Isolation Protection 1500V
        Physical Characteristic
        Enclosure IP-30
        Dimension (W x D x H) 26.1mm x 70mm x 95mm
        Weight 250g
        Environmental
        Storage Temperature -40÷80°C(-40÷176°F)
        Operating Temperature -20÷70°C (-4÷158°F)
        Operating Humidity 5%÷90% Non-condensing
        Regulatory approvals
        EMI FCC Part 15,
        CISPR (EN55022) class A
        EMS EN61000-4-2 (ESD),
        EN61000-4-3 (RS),
        EN61000-4-4 (EFT),
        EN61000-4-5 (Surge),
        EN61000-4-6 (CS),
        EN61000-4-8,
        EN61000-4-11
        Safety EN60950-1
        Warranty
        Warranty period 2 years
        Industrial Gigabit PoE Splitter, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing SPL-101GT)
        for special orders only
        Net Price: 180,00 EUR
        product card»


top

$ €