PoE |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports | Gigabit Ethernet (RJ-45) Port *1 (ETH1 Support IEEE802.3af PoE) |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 867Mbps, 2.4GHz Up to 300Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
EAP Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
2,4GHz- 2 * 3dBi, 5GHz- 2 * 4dBi |
Weatherproof Enclosure | IP65 |
Dimensions |
215.7*45*37.7mm (without antenna & mounting kit) , 403.8*90.7*55.2mm (with antenna & mounting kit) |
Power | PoE or External 12VDC / 1.5A Power Supply |
Power Consumption | 10.15 W |
Mounting | Pole/Wall Mounting (Kits included) |
Watch Dog | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1200 Wireless Dual Band Gigabit Access Point EAP225-Outdoor, Power Adapter, Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10 |
Certificates |
CE, FCC, RoHS |
Warranty | 5 years |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports |
Uplink 1x 10/100/1000Mbps (RJ-45) Port, Downlink- 3× 10/100/1000 Mbps Ethernet Ports (One port supports PoE OUT. The PoE OUT feature requires 802.3at PoE+ input and the maximum output is 13 W.) |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 867Mbps, 2.4GHz Up to 300Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
MANAGEMENT | |
Omada App | Yes |
Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller |
Cloud Access |
Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
2 Dual-Band Antennas, 2.4GHz- 2*4dBi, 5GHz- 2*4dBi |
Dimensions | 143 × 86 × 20 mm (5.6 × 3.4 × 0.8 in) |
Power | 802.3af/802.3at PoE |
Power Consumption | 9.8 watts /24.4 watts (PoE Out Included) |
Mounting | Wall Plate Mounting |
Watch Dog | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1200 Wireless Dual Band Gigabit Access Point EAP235-Wall, Mounting Screw, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10 |
Certificates |
CE, FCC, RoHS |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports |
10/100/1000Mbps (RJ-45) Port *1, Downlink- 10/100/1000Mbps Ethernet Port*1 |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 867Mbps, 2.4GHz Up to 300Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
MANAGEMENT | |
Omada App | Yes |
Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller |
Cloud Access |
Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
2 Dual-Band Antennas, 2.4GHz- 2*4dBi, 5GHz- 2*3.6dBi |
Dimensions | 3.4 × 3.4 × 1.2 in (86.8 × 86.8 × 30.2 mm) |
Power | 802.3af/802.3at PoE |
Power Consumption | 7 watts |
Mounting | Wall Plate Mounting |
Watch Dog | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1200 Wireless Dual Band Gigabit Access Point EAP230-Wall, Mounting Screw, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10 |
Certificates |
CE, FCC, RoHS |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports | Gigabit Ethernet (RJ-45) Port *1 (ETH1 Support IEEE802.3af PoE) |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 867Mbps, 2.4GHz Up to 450Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
EAP Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
3 Internal Omni 2.4GHz- 4dBi, 5GHz- 5dBi |
Dimensions | 8.1 × 7.1 × 1.5 in. (205.5 × 181.5 × 37.1 mm) |
Power |
802.3af/at PoE, 48V Passive PoE (+4,5pins; -7,8pins.) (PoE Adapter IS NOT Included) |
Power Consumption | 9.7 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Physical Security Lock | Kensington Lock Slot |
Watch Dog | Yes |
Operating Temperature | 0°C~60°C (-32℉~144℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1200 Wireless Dual Band Gigabit Access Point EAP223, Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
Certificates |
CE, FCC, RoHS |
Warranty | 5 years |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports | Gigabit Ethernet (RJ-45) Port *1 (ETH1 Support IEEE802.3af PoE) |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 867Mbps, 2.4GHz Up to 450Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
EAP Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
3 Internal Omni 2.4GHz- 4dBi, 5GHz- 5dBi |
Dimensions | 8.1 × 7.1 × 1.5 in. (205.5 × 181.5 × 37.1 mm) |
Power | PoE or External 12VDC / 1.5A Power Supply |
Power Consumption | 10.5 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Physical Security Lock | Kensington Lock Slot |
Watch Dog | Yes |
Operating Temperature | 0°C~60°C (-32℉~144℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1200 Wireless Dual Band Gigabit Access Point EAP225, Power Adapter, Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
Certificates |
CE, FCC, RoHS |
Warranty | 5 years |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports | 2 × Gigabit Ethernet (RJ-45) Port (One port supports IEEE802.3af/at PoE and Passive PoE) |
Button | Reset |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 1300Mbps, 2.4GHz Up to 450Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
MANAGEMENT | |
Omada App | Yes |
Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller |
Cloud Access |
Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
2 Dual-Band Antennas, 2.4GHz- 2*3.5dBi, 5GHz- 2*4dBi |
Dimensions | 8.1 × 7.1 × 1.5 in (205.5 × 181.5 × 37.1 mm) |
Power |
802.3af/at PoE, 48V Passive PoE (+4,5pins; -7,8pins. PoE Adapter Included) |
Power Consumption | 12.3 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Physical Security Lock | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1750 Wireless MU-MIMO Gigabit Ceiling Mount Access Point EAP265 HD, Gigabit Passive PoE Adapter, Power Cord, Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10, Linux |
Certificates |
CE, FCC, RoHS |
Processor |
Qualcomm 750 MHz, MIPS 74Kc |
---|---|
Memory |
128 MB DDR2 RAM, 16 MB Flash |
Standards |
IEEE 802.11a, IEEE 802.11n, IEEE 802.11ac |
Ports |
1 10/100/1000Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 Reset Button |
Wireless Configurations |
Pharos MAXtream TDMA Technology, 802.11a/n Modes, Selectable Channel Width 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter |
Security |
WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption |
Wireless Advanced |
Beacon Interval/RTS Threshold/Fragmentation, Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
Management |
Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server |
System Tools |
Wireless Signal Quality Indicators - Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors - Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute |
Signal Rate |
Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic) |
Receiver sensitivity |
802.11a 54M@ -75dBm 48M@ -76dBm 36M@ -83dBm 6-24M@ -95dBm, 802.11n MCS15 -73dBm, MCS14 -74dBm, MCS13 -76dBm, MCS12 -80dBm, MCS11 -83dBm, MCS10 -88dBm, MCS9 -90dBm, MCS8 -93dBm, MCS7 -73dBm, MCS6 -74dBm, MCS5 -76dBm, MCS4 -80dBm, MCS3 -83dBm, MCS2 -88dBm, MCS1 -90dBm, MCS0 -93dBm |
Antenna | 23 dBi |
Beam width | 9° (Azimuth)/7° (Elevation) |
Dimensions | 366 x 280 x 207 mm (14.4 x 11.0 x 8.1 in.) |
Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range 16-27VDC |
Protection |
15KV ESD Protection, 6000V Lightning Protection |
Enclosure |
Outdoor ASA stabilized plastic material, IP65 water and dust proof design |
Package Contents |
Outdoor Wireless CPE, 24V 0.5A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide |
Operating temperatures | -40°C ÷ 70°C |
System Requirements |
Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux. |
Certificates |
CE, FCC, RoHS, IP65, IC |
Manufacturer | Tp-Link |
Standards | IEEE 802.11ac/n |
---|---|
Ports | 2x 10/100/1000 Mbps RJ-45 |
Chipset |
Atheros MIPS 74Kc, 720 MHz |
Operating memory | 128 MB DDR2 |
Flash memory | 8 MB |
Antenna |
build-in, 19 dBi |
VSWR | 1.5 |
Dimensions | 189 x 189 x 125 mm |
Weight | 0.530 kg |
Mounting | mast or wall with the aid of antenna wall support |
Max. power consumption | 8.5 W |
Power | PoE 24V 0.5A Gigabit PoE Adapter (Included) |
Operating temperatures | -40°C ÷ 80°C |
Operating humidity |
5% ÷ 95%, Non-condensing |
Wind Loading | 45.4 N @ 200 km/h (10.2 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
ESD/EMP Protection Air |
± 24 kV, Contact ± 24 kV |
Certifications |
CE, FCC, IC |
RoHS Compliance | Yes |
Salt Fog Test |
IEC 68-2-11 (ASTM B117), Equivalent MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test |
IEC 68-2-5 at 40° C (104° F), Equivalent ETS 300 019-1-4 |
Wind-Driven Rain Test |
ETS 300 019-1-4, Equivalent MIL-STD-810 G Method 506.5 |
Manufacturer | Ubiquiti |
Ports | 2x 10/100/1000 Mbps RJ-45 |
---|---|
Chipset |
Atheros MIPS 74Kc, 560 MHz |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
VSWR | 1.6 |
Beam width | 45° |
Dimensions | 257 x 84 x 41 mm |
Weight | 233 g |
Mounting | Pole-Mount (Kit Included) |
Max. power consumption | 8,5 W |
Power |
802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Ports | 10/100/1000 Mbps RJ-45 |
---|---|
Chipset |
Atheros MIPS 74Kc, 560 MHz |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
VSWR | 1.8 |
Beam width | 45° |
Dimensions | 179 x 77.5 x 59.1 mm |
Weight | 180 g |
Mounting | Pole-Mount (Kit Included) |
Max. power consumption | 8,5 W |
Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Ports | 10/100/1000 Mbps RJ-45 |
---|---|
Chipset |
Atheros MIPS 74Kc, 560 MHz |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
VSWR | 1.8 |
Beam width | 45° |
Dimensions | 179 x 77.5 x 59.1 mm |
Weight | 180 g |
Mounting | Pole-Mount (Kit Included) |
Max. power consumption | 8,5 W |
Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas | 3x Internal Dual-Band Antennas (8 dBi) |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method | 802.3af PoE (Supported Voltage Range- 44 to 57VDC) |
Power Supply |
48V, 0.5A Gigabit PoE Adapter |
Maximum Power Consumption | 9 W |
Maximum TX Power | 22 dBm |
BSSID | Up to 8 per Radio |
Dimensions | 343.2 x 181.2 x 60.2 mm |
Weight | 633 g |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -40 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11n |
6.5 Mbps to 400 Mbps (MCS0 - MCS15, HT 20/40) |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11b | 1, 2, 5.5, 11 Mbps |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2x External Dual-Band Omni Antennas (3 dBi, 4 dBi) |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
24V Passive PoE (Pairs 4, 5+; 7, 8 Return); 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), (Supported Voltage Range- 44 to 57VDC) |
Power Supply |
24V, 0.5A Gigabit PoE Adapter |
Maximum Power Consumption | 8,5 W |
Maximum TX Power | 20 dBm |
BSSID | Up to 8 per Radio |
Dimensions | 353 x 46 x 34.4 mm |
Weight | 152 g with Antennas |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -30 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11b | 1, 2, 5.5, 11 Mbps |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
Power Supply |
24V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 6.5 W |
Maximum TX Power |
2.4 GHz - 20 dBm, 5 GHz - 20 dBm |
BSSID | Up to 8 Per Radio |
Dimensions | 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24") |
Weight | 170 g (185 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
Power Supply |
24V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 6.5 W |
Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
BSSID | Up to Four Per Radio |
Dimensions | 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70") |
Weight | 240 g (315 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 200+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Ports |
2 x 10/100/1000 Ethernet Ports, , 1x USB 2.0 Port |
---|---|
Buttons | Reset |
Antennas |
(3) Dual-Band Antennas, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (48V), 802.3af/at Supported |
Power Supply |
48V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 9 W |
Maximum TX Power |
2.4 GHz - 22 dBm, 5 GHz - 22 dBm |
BSSID | Up to 8 Per Radio |
Dimensions | 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38") |
Weight | 350 g (450 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.
The Access Point AC HD (UAP AC HD) is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (4x24MIMO) bands. The UAP AC HD also has a focused antenna pattern to enhance your network's capacity and reduce interference from neighboring access points. This access point is powered with 802.3at PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types. The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2.4 GHz - (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO), 5 GHz - (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each (Supports 4x4 MIMO) |
Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
Power Method |
802.3at PoE+, UniFi Switch (PoE), 44 to 57VDC |
Maximum Power Consumption | 17W |
Maximum TX Power |
2.4 GHz - 6-25 dBm, 5 GHz - 6-25 dBm |
BSSID | 8 per Radio |
Dimensions | 220 x 220 x 48.1 mm |
Weight | 700 g (830 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Noncondensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 1000+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Dual-band, 802.11ac Wave 2 access point that can support over 200 clients with its 2+ Gbps aggregate throughput rate.
The Access Point nanoHD (UAP nanoHD) is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The UAP nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you'd like to enhance your wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2.4 GHz - (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each (Supports 2x2 MIMO), 5 GHz - (2) Single-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO) |
Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
Power Method |
802.3af PoE, UniFi Switch (PoE) |
Maximum Power Consumption | 10.5W |
Maximum TX Power |
2.4 GHz - 23 dBm, 5 GHz - 26 dBm |
BSSID | 8 per Radio |
Dimensions | 160 x 160 x 32.65 mm |
Weight | 300 g (315 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Noncondensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 200+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Ports | 1x 10/100/1000 Mbps RJ-45 |
---|---|
Operating modes |
Access Point, Bridge, Client, WDS |
Processor | MIPS 74Kc |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
Gain | 23 dBi |
Antenna |
detachable, 2x SMA-RP(F) |
Dimensions | 358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73") |
Weight |
800 g (1.76 lb), With Mount 980 g (2.16 lb) |
Mounting | Pole-Mounting Kit (Included) |
Max. power consumption | 7 W |
Power |
24V, 0.3A Gigabit PoE Adapter (Included) |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Supported Voltage Range | 24V ± 10% |
Wind Loading | 275 N @ 200 km/h (61.8 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
ESD/EMP Protection | ± 24 kV Contact / Air |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Standards |
IEEE 802.11n, IEEE 802.11b/g 2,4 GHz, IEEE 802.11ac/n/a 5 GHz |
---|---|
Ports | 1x 10/100/1000 Mbps RJ-45 PoE (LAN) |
Frequency range | 2,4 GHz and 5 GHz |
Modulation |
DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
Operating modes |
AP Mode, Multi-SSID Mode, AP Client Mode, Repeater Mode (WDS / Universal), AP+ Bridge mode |
Max. speed |
1200 Mbps (867 Mbps at 5 GHz, 300 Mbps at 2.4 GHz) |
EIRP |
CE <20 dBm (2,4 GHz), <23 dBm (5,15 GHz~5,25 GHz), FCC <30 dBm (2,4 GHz & 5 GHz) |
Antenna | 4 Fixed High Performance Antennas |
WLAN security |
WEP 64/128/152-bit, WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP, AES |
WLAN features |
3T3R MIMO, CCA, QSS button, 4x SSIDs, VLAN support |
Auto MDI/MDIX | yes |
Dimensions | 400×255×72 mm |
Operating temperatures | 0°C ÷ 40°C |
Operating humidity |
5% ÷ 90%, non-condensing |
Power | 12 V/1,5 A |
Certificates |
CE, FCC, RoHS |
Manufacturer | TP-Link |