This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
High-Technologies Supplier
Sunday, 3 July
EN50155

EN50155 Network Devices for Rolling Stock and Railway

  • Communication for industry
      • » GIGABIT ETHERNET / MANAGED SWITCHES
          #08158  

          Managed switch, 3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-3032GC)

          IGS-3032GC is a full gigabit managed Redundant Ring Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
          IGS-3032GC can be managed centralized and convenient by a powerful windows utility - Open-Vision.
          The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 3
          1000 Mbps SFP Ports 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 10 Gbps
          Max. Number of Available VLANs 256
          Number of VLAN IDs VID 1 to 4094
          IGMP multicast groups 256
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          1000X / Fiber port Indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs +12 ~ +48VDC or -12 ~ -48VDC on 7-pin terminal block,
          12 ~ 45VDC on power jack
          Power consumption (typical) 10W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.1mm x 106.1mm x 145.4mm
          Weight 1022g
          Environmental
          Storage Temperature -4085C(-40185F)
          Operating Temperature -4070C (-14140F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch,  3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-3032GC)
          Net Price: 532,00 EUR

      • » GIGABIT ETHERNET MEDIA CONVERTERS
          #07964  

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)

          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          1000Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
          Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
          Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Amber for P.S.E. indicator
          Power
          Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) 4 Watts (P.S.E. output included)
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 40mm x 70mm x 95mm
          Weight 291g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4075C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Recommended power supply: #06676 Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)
          Net Price: 234,00 EUR

      • » EN50155 COMPATIBLE CONVERTERS
          #07650  

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket (ORing IPMC-111PB)

          IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40C~70C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

          IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          100Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
          Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
          Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Amber for P.S.E. indicator
          Power
          Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) 31.2 Watts (P.S.E. output included)
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 26.1mm x 70mm x 95mm (1.03 x 2.76 x 3.74 inch)
          Weight 210g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4070C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          IPMC-111PB series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
          Recommended power supply: #06676 Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket (ORing IPMC-111PB)
          Net Price: 177,00 EUR

          #06522  

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket (ORing IPMC-111PB++-60W)

          IPMC-111PB++-60W is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB++-60W supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB++-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard 4-pair cable in an Ethernet network. Each IPMC-111PB++-60W has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB++-60W with wide operating temperature range from -40 ~ 75℃ and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.

          IPMC-111PB++-60W also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB++-60W will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB++-60W is reliable media converter with PoE capability and can satisfy most demand of operating environment.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          100Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
          Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
          Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Green for P.S.E. indicator
          DIP Switch
          DIP-Switch 1 for LFP mode selection (ON) enable / (OFF) disable
          DIP-Switch 2 for Ethernet speed selection (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
          DIP-Switch 3 for Ethernet full/half duplex selection (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
          DIP-Switch 4 for fiber full/half duplex selection (ON) Half-Duplex / (OFF) Full-Duplex
          DIP Switch for PoE mode
          DIP Switch 1/2 DIP Switch 1/2 (OFF)- PoE P.S.E set to master and Asyncronize mode. DIP Switch 1/2 (ON) - PoE P.S.E set to syncronize mode(default)
          Power
          Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) 31.2 Watts (P.S.E. output included)
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 26.1mm x 70mm x 95mm (1.03 x 2.76 x 3.74 inch)
          Weight 210g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4075C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMC CE EMC (EN 55024,
          EN 55032),
          FCC Part 15 B
          EMI EN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15 B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
          IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
          IEC/EN 61000-4-5 (Surge),
          IEC/EN 61000-4-6 (CS),
          IEC/EN 61000-4-8(PFMF),
          IEC/EN 61000-4-11 (DIP))
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          MTBF 2067004hr
          Warranty
          Warranty period 5 years
          IPMC-111PB series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
          Recommended power supply: #08397 Power supply 120W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-120-48).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/100Base-T(X) P.S.E. and 1x100Base-FX, SFP socket (ORing IPMC-111PB++-60W)
          Net Price: 223,00 EUR

          #07647  

          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) (ORing IGMC-111GPB)

          Physical Ports
          100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-FX SFP ports 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          LED Indicators
          Power indicator Green LED x 2 (ON) power input on-line / (OFF) power input off-line
          10/100TX RJ45 port indicator LED for Link/Act and Speed indicator,
          Green on only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green and Amber on - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          If amber on only - 10Mbps (This is not working mode)
          100/1000X Port Indicator Green for port Link/Act
          Power
          Input power Dual DC inputs. 1248VDC on 4-pin terminal block
          Power consumption (typical) 3.6W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x H x D) 26.1mm x 70mm x 95mm
          Weight 190g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4070C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) (ORing IGMC-111GPB)
          Net Price: 177,00 EUR

      • » IEC 61850-3 COMPATIBLE CONVERTERS
          #08427  

          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-MM-SC-LV)

          IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
          Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
          Physical Ports
          Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
          Fiber port 100Base-FX Multi-mode SC 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-T(X) and 100Base-FX,
          IEEE 802.3x for Flow control
          LED Indicators
          Power / Ready indicator Green Ready LED x 3
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act,
          Amber for duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          Fault indicator Amber - Indicate unexpected event occurred
          Power
          Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
          12~45VDC on power jack
          Power consumption (typical) 10.56W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
          Weight 660g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4085C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          Power Automation IEC 61850-3,
          IEEE 1613
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
          Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).
          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-MM-SC-LV)
          Net Price: CallCall

          #08428  

          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-SS-SC-LV)

          IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
          Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
          Physical Ports
          Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
          Fiber port 100Base-FX Single-mode SC 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-T(X) and 100Base-FX,
          IEEE 802.3x for Flow control
          LED Indicators
          Power / Ready indicator Green Ready LED x 3
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act,
          Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          Fault indicator Amber- Indicate unexpected event occurred
          Power
          Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
          12~45VDC on power jack
          Power consumption (typical) 10.08W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
          Weight 660g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4085C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          Power Automation IEC 61850-3,
          IEEE 1613
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
          Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).
          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-SS-SC-LV)
          Net Price: CallCall

          #08429  

          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX SFP socket (ORing IMC-P111FP-LV)

          IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85 C and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
          Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
          Physical Ports
          Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
          100Base-FX SFP port 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-T(X) and 100Base-FX,
          IEEE 802.3x for Flow control
          LED Indicators
          Power / Ready indicator Green Ready LED x 3
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act,
          Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          Fault indicator Amber- Indicate unexpected event occurred
          Power
          Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
          12~45VDC on power jack
          Power consumption (typical) 10.56W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
          Weight 650g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -4085C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          Power Automation IEC 61850-3,
          IEEE 1613
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
          Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX SFP socket (ORing IMC-P111FP-LV)
          Net Price: CallCall

      • » CARD TYPE CONVERTERS AND CHASSIS
          #08443  

          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)

          RGMC-111GPB is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000 (#08437). RGMC-111GPB is a cost-effective solution for the conversion between 100/1000Base-T(X) and 100/1000Base-X SFP interface, it allows you to extend communication distance by optical fiber. RGMC-111GPB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RGMC-111GPB to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
          Physical Ports
          100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-FX SFP port 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          Processing Store-and-Forward
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps,
          DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          LED Indicators
          Power indicator Green Power LED x 1
          10/100Base-T(X) RJ45 port indicator Green only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green and Amber - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
          *Note - If amber on only - 10Mbps (This is not avail mode)
          100/1000Base-(F)X fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
          Power
          Power consumption (typical) 3.6W
          Overload current protection present
          Physical Characteristic
          Dimension (W x H x D) 21.8mm x 66.5mm x 126mm
          Weight 125g
          Environmental
          Storage Temperature -4085C
          Operating Temperature -1060C
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Warranty
          Warranty period 2 years
          Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)
          Net Price: 177,00 EUR

      • » UNMANAGED SWITCHES
          #07649  

          Unmanaged switch, 5x 10/100 M12 (ORing TES-150-M12)

          ORing’s TransporterTM series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TES-150-M12 is an unmanaged Ethernet switch with 5x10/100Base-T(X) ports which is compliant with EN50155 request. It is specifically designed for the toughest industrial environments. TES-150-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. The TES-150-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for your network. Therefore, the switch is one of the most reliable choices for rolling stock Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports w/Auto MDI/MDIX 5
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          Processing Store-and-Forward
          LED Indicators
          Power Indicator Green - Power LED x 1
          10/100TX Port Indicator Green for port Link/Act,
          Amber for Duplex/Collision
          Power
          Input power 12~48 VDC
          Connector Type Waterproof M12
          Power consumption (typical) 3W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 88.9 (W) x 40 (D) x 178.2 (H)mm
          Weight 375g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6,
          EN61373
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 5x 10/100 M12 (ORing TES-150-M12)
          Net Price: CallCall

          #08415  

          Unmanaged switch, 8x 10/100 M12 (ORing TES-1080-M12)

          ORing’s TransporterTM series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.
          The TES-1080-M12 is an unmanaged Ethernet switch with 8x10/100Base-T(X) ports with EN50155 certification.TES-1080-M12 rugged IP-40 aluminum enclosure.
          All Ethernet ports on TES-1080-M12 are implemented with M12 connectors to ensure dust-tight connection,and to guarantee reliable operation against environmental disturbances, such as vibration and shock.
          In addition, the wide operating temperature range from -40C to 70C can satisfy most of tough operating environments. Therefore, the switch is one of the most reliable choices for rolling stock Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports w/Auto MDI/MDIX 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          MAC Table 8192 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power Indicator Green - Power LED x 2,
          Indicates power input
          Ready / Ring Master Indicator Green - Indicate system ready and Ring master mode
          O-Ring Indicator Green- Indicates port operating in O-Ring mode
          10/100TX Port Indicator Green for port Link/Act. Amber for Collision/Duplex indicator
          Power
          Input power Dual 12~ 48 VDC
          Connector Type Waterproof M12
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 125mm x 65mm x 196mm
          Weight 896 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 M12 (ORing TES-1080-M12)
          Net Price: CallCall

          #07898  

          Unmanaged switch, 8x 10/100 M12 (ORing TES-180-M12)

          ORing’s TransporterTM series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TES-180-M12 is an unmanaged Ethernet switch with 8x10/100Base-T(X) ports which is compliant with EN50155 request. It is specifically designed for the toughest industrial environments. TES-180-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. The TES-180-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for your network. Therefore, the switch is one of the most reliable choices for rolling stock Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports w/Auto MDI/MDIX 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          Processing Store-and-Forward
          LED Indicators
          Power Indicator Green - Power LED x 1
          10/100TX Port Indicator Green for port Link/Act,
          Amber for Duplex/Collision
          Power
          Input power 12~48 VDC
          Connector Type Waterproof M12
          Power consumption (typical) 4.32W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 88.9 (W) x 40 (D) x 178.2 (H)mm
          Weight 510g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6,
          EN61373
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 M12 (ORing TES-180-M12)
          Net Price: CallCall

          #08416  

          Unmanaged switch, 8x 10/100 M12 Bypass, (ORing TES-1080-M12-BP2)

          ORing’s TransporterTM series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway. The TES-1080-M12-BP2, which is compliant with the EN50155 standard, is an unmanaged Ethernet switch with 8x10/100Base-T(X) ports (4 of these ports also double as 2 sets of bypass ports).
          TES-1080-M12-BP2 is constructed of a rugged aluminum case and designed with Ethernet ports (M12 type connector), which provide a dust-tight connection. TES-1080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.
          TES-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. Each set of these bypass ports includes Network ports and Monitor ports.
          The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-linking local networking device. When the power is on, the operating mode of the Bypass ports is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass ports are swiftly set to bypass mode to isolate the main-network from the local networking device.
          In addition, the wide operating temperature range from -40C to 70C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock Ethernet application.
          Physical Ports
          10/100 Base-T(X) Bypass Ethernet Auto MDI/MDIX 8 (Built-in 2 sets of bypass ports)
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          MAC Table 8192 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power Indicator Green - Power LED x 2,
          Indicates power input
          Ready / Ring Master Indicator Amber LED - Light on for system ready / Blinking for system ready and Ring master mode - Light off for system failed
          O-Ring Indicator Amber - Indicates port operating in O-Ring mode (per port)
          10/100TX Port Indicator Green for port Link/Act. (per port)
          Power
          Input power Dual 12~48VDC
          Connector Type Waterproof M12
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 125mm x 65mm x 196mm
          Weight 896 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100 M12 Bypass, (ORing TES-1080-M12-BP2)
          Net Price: CallCall

          #07864  

          Unmanaged switch, 8x 10/100/1000 M12 (ORing TGS-1080-M12)

          ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGS-1080-M12 is an un-managed Ethernet switch with 8x10/100/1000Base-T(X) which is specifically designed for the toughest and fully compliant with EN50155 requirement. Each TGS-1080-M12 switch has 8X10/100/1000Base-T(X) ports. TGS-1080-M12 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock application.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T
          MAC Table 8192 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 3
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Bottom Amber for Duplex / Collision indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power Dual 12~48VDC on 5-pin M23 connector,
          72~110VDC for TGS-1080-M12-MV
          Power consumption (typical) 2.88W
          Overload current protection present
          Physical Characteristic
          Dimension (W x D x H) 125 x 65 x 196 mm
          Weight 967 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          TGS-1080-M12-MV - version with 110VDC power input
          Unmanaged switch, 8x 10/100/1000 M12 (ORing TGS-1080-M12)
          Net Price: CallCall

          #07865  

          Unmanaged switch, 8x 10/100/1000 M12, Bypass (ORing TGS-1080-M12-BP2)

          ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGS-1080-M12-BP2 is an un-managed Ethernet switch with 8x10/100/1000Base-T(X) which is specifically designed for the toughest and fully compliant with EN50155 requirement. Each TGS-1080-M12-BP2 switch has 8X10/100/1000Base-T(X) ports. TGS-1080-M12-BP2 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TGS-1080-M12-BP2 includes 2 sets of bypass ports that protect the network from failures and Network maintenance by ensuring network integrity during power loss. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock application.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8 (bypass function included by last 4 ports)
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T
          MAC Table 8192 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 3
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Bottom Amber for Duplex / Collision indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power Dual 12~48VDC on 5-pin M23 connector,
          72~110VDC for TGS-1080-M12-BP2-MV
          Power consumption (typical) 6.24W
          Overload current protection present
          Physical Characteristic
          Dimension (W x D x H) 125 x 65 x 196 mm
          Weight 1007 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          TGS-1080-M12-BP2-MV - version with 110VDC power input
          Unmanaged switch, 8x 10/100/1000 M12, Bypass (ORing TGS-1080-M12-BP2)
          Net Price: CallCall

      • » MANAGED SWITCHES
          #07648  

          Smart switch, 5x 10/100 M12, O-Ring <10ms (ORing TES-250-M12)

          ORing’s Transporter series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TES-250-M12 is a lite-managed redundant ring Ethernet switch with 10/100Base-T(X) ports which is compliant with EN50155 request. With complete support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technologies. It is specifically designed for the toughest industrial environments. TES-250-M12 EN50155 Ethernet switch uses M12 connectors to ensure tight, robust connections and guarantees reliable operation against environmental disturbances, such as vibration and shock. TES-250-M12 can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40~70C can satisfy most of operating environment. The TES-250-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet applications.
          Physical Ports
          10/100 Base-T(X) Ports w/Auto MDI/MDIX 5
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 2048 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.0 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic,
          SNMP v3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          Fast recovery,
          STP,
          RSTP
          LED Indicators
          Power Indicator Green - Power LED x 1,
          Indicates power input
          Ready / Ring Master Indicator Amber LED - Light on for system ready / Blinking for system ready and Ring master mode - Light off for system failed
          O-Ring Indicator Amber - Indicates port operating in O-Ring mode (per port)
          10/100TX Port Indicator Green for port Link/Act. (per port)
          Power
          Input power 12~ 48 VDC
          Connector Type Waterproof M12
          Power consumption (typical) 3W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 88.9 (W) x 40 (D) x 178.2 (H)mm
          Weight 375g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Smart switch, 5x 10/100 M12, O-Ring <10ms (ORing TES-250-M12)
          Net Price: CallCall

          #07897  

          Managed switch, 8x 10/100 M12 + 2x 10/100/1000 M12 Bypass (ORing TES-3082GT-M12-BP1)

          ORing's TransporterTM series managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TES-3082GT-M12-BP1 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) and 2x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. TES-3082GT-M12-BP1 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TES-3082GT-M12-BP1 can be managed centralized and convenient by a powerful windows utility ~ Open-Vision. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100 Base-T(X) Bypass Ethernet Auto MDI/MDIX 8
          10/100/1000 Base-T(X) Bypass Ethernet Auto MDI/MDIX 2
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 5.6Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1Q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMP v1/v2c/v3 encrypted authentication and access security
          Software Features STP/RSTP/MSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          Fast recovery,
          STP,
          RSTP,
          MSTP
          LED Indicators
          Power Indicator Green - Power LED x 2
          Ready / Ring Master Indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring Indicator Amber - Indicates port operating in O-Ring mode (per port)
          10/100TX Port Indicator Green for port Link/Act. (per port)
          10/100/1000TX Port Indicator Green for Link/Act. Amber for 100Mbps indicator
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Input power Dual 12~48VDC
          Connector Type Waterproof M23
          Power consumption (typical) 11W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 170mm x 75mm x 196mm
          Weight 1338 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch,  8x 10/100 M12 + 2x 10/100/1000 M12 Bypass (ORing TES-3082GT-M12-BP1)
          Net Price: CallCall

          #07852  

          Managed switch, 8x 10/100 RJ-45 + 2 slide-in SFP slots / RJ-45, O/Open-Ring <10ms (ORing IES-3082GC)

          IES-3082GC is managed redundant ring Ethernet switch with 8x10/100Base-T(X) ports and 2xGigabit combo ports which is compliant with EN50155 request. The Ethernet switch is designed for industrial applications, such as rolling stock, vehicle, and railway applications. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 7
          1000 COMBO with SFP 3
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100Base-FX,
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1X for Authentication,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 5.6 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security,
          Modbus/TCP
          Network Redundancy STP,
          RSTP,
          O-Ring,
          Open-Ring,
          O-RSTP,
          O-Chain,
          MRP
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - indicates system operated in O-Ring Master mode
          Fault indicator Amber - Indicates unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for Duplex/Collision
          10/100/1000TX RJ45 port indicator Green for port Link/Act,
          Amber for 100Mbps
          Fiber port indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 1248VDC on 6-pin terminal block
          Power consumption (typical) 8.5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1140g
          Environmental
          Storage Temperature -4085C(-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN50121-4,
          EN55011)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 8x 10/100 RJ-45 + 2 slide-in SFP slots / RJ-45, O/Open-Ring <10ms (ORing IES-3082GC)
          Net Price: CallCall

          #08414  

          Smart switch, 8x 10/100 M12 Bypass, O-Ring <10ms (ORing TES-3080-M12-BP2)

          The TES-3080-M12-BP2 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
          It is specifically designed for the toughest industrial environments. TES-3080-M12-BP2 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock.
          Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. TES-1080-M12-BP2 included dual bypass ports, These bypass ports protect the network from failures and Network maintenance by ensuring network integrity during power loss. Each of these bypass ports includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operating mode of the Bypass ports is set to Normal , and the local networking device is connected with main-network. When power failure occurs, the Bypass ports is swiftly set to bypass mode to isolate the main-network from the local networking device.
          Physical Ports
          10/100 Base-T(X) Bypass Ethernet Auto MDI/MDIX 8 (Built-in 2 sets of bypass ports)
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.6 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic,
          SNMP v3 encrypted authentication and access security
          Software Features STP/RSTP/MSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          Fast recovery,
          STP,
          RSTP,
          MSTP
          LED Indicators
          Power Indicator Green - Power LED x 2,
          Indicates power input
          Ready / Ring Master Indicator Green - Indicate system ready and Ring master mode
          O-Ring Indicator Green- Indicates port operating in O-Ring mode
          10/100TX Port Indicator Green for port Link/Act. Amber for Collision/Duplex indicator
          Power
          Input power Dual 12~48VDC on 5-pin M23 connector
          Connector Type Waterproof M12
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 125mm x 65mm x 196mm
          Weight 896 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Smart switch, 8x 10/100 M12 Bypass, O-Ring <10ms (ORing TES-3080-M12-BP2)
          Net Price: CallCall

          #08422  

          Smart switch, 8x 10/100 M12, O-Ring <10ms (ORing TES-3080-M12)

          ORing’s TransporterTM series managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications.
          The TES-3080-M12 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. It is specifically designed for the toughest industrial environments.
          TES-3080-M12 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring.
          TES-3080-M12 can be managed centralized and convenient by a powerful windows utility ~ Open-Vision. In addition, the wide operating temperature range from -40C to 70C can satisfy most of operating environment.
          Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100 Base-T(X) Ports w/Auto MDI/MDIX 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 1.6 Gbps
          VLAN Port Based
          Security Features Enable/disable ports,
          VLAN to segregate and secure network traffic,
          SNMP v3 encrypted authentication and access security
          Software Features STP/RSTP/MSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          Fast recovery,
          STP,
          RSTP,
          MSTP
          LED Indicators
          Power Indicator Green - Power LED x 2,
          Indicates power input
          Ready / Ring Master Indicator Green - Indicate system ready and Ring master mode
          O-Ring Indicator Green- Indicates port operating in O-Ring mode
          10/100TX Port Indicator Green for port Link/Act. ,
          Amber for Collision/Duplex indicator
          Power
          Input power Dual 12~48VDC
          Connector Type Waterproof M12
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 125mm x 65mm x 196mm
          Weight 896 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Smart switch, 8x 10/100 M12, O-Ring <10ms (ORing TES-3080-M12)
          Net Price: CallCall

          #07939  

          Managed switch, 16x 10/100 M12 + 2x 10/100/1000 M12 Bypass (ORing TES-3162GT-M12-BP1)

          ORing's TransporterTM series managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TES-3082GT-M12-BP1 is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) and 2x10/100/1000Base-T(X) ports which is specifically designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. TES-3082GT-M12-BP1 EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TES-3082GT-M12-BP1 can be managed centralized and convenient by a powerful windows utility ~ Open-Vision. In addition, the wide operating temperature range from -40 oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100 Base-T(X) Bypass Ethernet Auto MDI/MDIX 16
          10/100/1000 Base-T(X) Bypass Ethernet Auto MDI/MDIX 2
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10Base-T,
          IEEE 802.3u for 100Base-TX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching bandwidth 7.2Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 1024
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1Q ) to segregate and secure network traffic,
          Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
          Radius centralized password management,
          SNMP v1/v2c/v3 encrypted authentication and access security
          Software Features STP/RSTP/MSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy O-Ring,
          Open-Ring,
          Fast recovery,
          STP,
          RSTP,
          MSTP
          LED Indicators
          Power Indicator Green - Power LED x 2
          Ready / Ring Master Indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring Indicator Amber - Indicates port operating in O-Ring mode (per port)
          10/100TX Port Indicator Green for port Link/Act. (per port)
          10/100/1000TX Port Indicator Green for Link/Act. Amber for 100Mbps indicator
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Input power Dual 12~48VDC
          Connector Type Waterproof M23
          Power consumption (typical) 12.48W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Dimension (W x D x H) 260mm x 91,3mm x 216mm
          Weight 2020 g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -4070C (-40158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Managed switch, 16x 10/100 M12 + 2x 10/100/1000 M12 Bypass (ORing TES-3162GT-M12-BP1)
          Net Price: CallCall

      • » WIRELESS ACCESS POINTS
          #07878  

          Wireless access point, 2x 10/100/1000 M12 (LAN) PoE + 1x 802.11b/a/g/n (WLAN) (ORing TGAP-620+-M12)

          ORing’s TransporterTM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAP-620-M12 is a reliable 802.11 a/b/g/n WLAN Access Point with 2 Ethernet 10/100/1000 ports. It can be configured to operate in AP/Client /Bridge /AP-Client Mode. TGAP-620-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TGAP-620-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TGAP-620-M12 by WEB interface via LAN port or WLAN interface. TGAP-620-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. In addition, TGAP-620+-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAP-620-M12 is one of the best communication solutions for wireless applications.
          Physical Ports
          10/100/1000 Base-T(X) Ports in M-12 Auto MDI/MDIX 2 (Present at ETH2 Fully compliant with IEEE 802.3af PoE P.D)
          DIDO port in M12 (5-pin A-coding) 2 (DI x 4 and DO x 4)
          RS-232 Console port in M12 115200, 8 ,N ,1
          WLAN interface
          Operating Mode AP/Bridge/Repeater/AP-Client
          Antenna Connector 2 x External reverse SMA-type antenna connector
          Radio Frequency Type DSSS
          Modulation IEEE802.11b CCK,
          DQPSK,
          DBPSK
          Modulation IEEE802.11a/g OFDM
          Modulation IEEE802.11n BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band America/FCC 2.412~2.462 GHz (11 channels),
          5.180~5.240 GHz & 5.745~5.825 GHz (9 channels),
          Europe CE/ETSI 2.412~2.472 Ghz (13 channels),
          5.180~5.240 GHz (4 channels)
          Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
          IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
          IEEE802.11n UP to 300 Mbps
          Transmit Power 802.11a 12dBm ± 1.5dBm@54Mbps,
          802.11b 17dBm ± 1.5dBm@11Mbps,
          802.11g 16dBm ± 1.5dBm@54Mbps,
          802.11gn HT20 15dBm ± 1.5dBm @MCS7,
          802.11gn HT40 14dBm ± 1.5dBm @MCS7,
          802.11an HT20 -74dBm ± 2dBm@MCS7,
          802.11an HT40 -71dBm ± 2dBm@MCS7
          Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
          802.11g -76dBm ± 2dBm@54Mbps,
          802.11gn HT20 -75dBm ± 2dBm@MCS7,
          802.11gn HT40 -72dBm ± 2dBm@MCS7
          Encryption Security WEP (64-bit ,128-bit key),
          WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
          802.1X/RADIUS Authentication supported
          Wireless Security SSID broadcast disable
          Protocol Support ARP,
          BOOTP,
          DHCP,
          DNS,
          HTTPs,
          IP,
          ICMP,
          SNTP,
          TCP,
          UDP,
          RADIUS,
          SNMP,
          STP (IEEE 802.1D),
          RSTP,
          PPPoE
          LED Indicators
          Power Indicator 2 x LEDs,
          (PW1) Green On - Power is on,
          (PW2) Green On - Power is on or power by PoE
          100/1000Base-T(X) M-12 Port Indicator 2 x LEDs,
          Green for port Link/ Act
          WLAN LEDs 1 x LED,
          Green for WLAN Link/ Act
          Fault 1 x LED,
          Red for Ethernet link down or power down indicator
          Fault Contact
          Relay Relay output to carry capacity of 1A at 24VDC (5-pin M12 A-coding)
          Power
          Redundant Input Power Dual DC inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
          Power consumption (typical) 8.5W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 125.6mm x 65mm x 196.1mm
          Weight 960g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -2570C (-13158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6,
          EN61373
          Rail Traffic EN50155
          Cooling EN60068-2-1
          Dry Heat EN60068-2-2
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Wireless access point, 2x 10/100/1000 M12 (LAN) PoE + 1x 802.11b/a/g/n (WLAN) (ORing TGAP-620+-M12)
          Net Price: CallCall

      • » WIRELESS 3G/4G ROUTERS
          #08188  

          Wireless router 3G, 2x 10/100 RJ-45 (WAN + LAN) + 1x 802.11a/b/g (WLAN) + 1x USB (ORing TAR-3120-M12)

          ORing’s Transporter series cellular VPN router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications.

          TAR-3120-M12 is a reliable Dual-RF IEEE802.11a/b/g and IEEE 802.11b/g cellular VPN router with 2 ports LAN which is fully compliant with EN50155 certification. It supports 802.1X and MAC filter for security control. It can be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular Modem dial-up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem.

          TAR-3120-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TAR-3120-M12 provides dual RF wireless interfaces, which can provide IEEE 802.11 a/b/g and IEEE 802.11 b/g dual band wireless communication and can be applied to fulfill any demands of wireless applications. TAR-3120-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports.
          Physical Ports
          10/100Base-T(X) Ports RJ45 Auto MDI/MDIX 2 (M12 connector – D coding)
          WLAN Interface
          WAN Connection Type Static/Dynamic IP,
          PPPoE,
          3G Modem dial-up
          Antenna and Connector 2 x 2 dBi (b/g mode) / 3dBi (a mode) on Reverse SMA connector,
          2 x 2 dBi (Cellular modem) on Reverse SMA connector
          Radio Frequency Type DSSS,
          OFDM
          Modulation
          IEEE 802.11a OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          IEEE 802.11b CCK,
          DQPSK,
          DBPSK
          IEEE 802.11g OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band America / FCC 2.412~2.462 GHz (11 channels),
          5.15 to 5.825 GHz (13 channels),
          Europe CE / ETSI 2.412~2.472 Ghz (13 channels),
          5.15 to 5.724 GHz (19 channels)
          Transmission Rate
          IEEE 802.11b 1 / 2 / 5.5 / 11 Mbps
          IEEE 802.11a/g 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
          Transmit Power IEEE802.11a/b/g 20dBm max
          Receiver Sensitivity
          IEEE 802.11a -77dBm±2.0dB @ 54Mbps PER< 10%
          IEEE 802.11b -86dBm±1.5dB @ 11Mbps PER< 8%;
          IEEE 802.11g -78dBm±1.5dB @ 54Mbps PER< 10%
          Encryption Security
          WEP (64-bit and 128-bit key supported)
          WPA/WPA2 802.11i(WEP and AES encryption)
          WPA-PSK (256-bit key pre-shared key supported)
          802.1X Authentication supported
          TKIP encryption
          Wireless Security SSID broadcast disable
          LED Indicators
          Power Indicator Green for Power indicator
          RJ45 Port Indicator Green for port Link/ Act at 100Mbps. Amber for port Link/ Act at 10Mbps.
          WLAN LEDs Green for WLAN Link/ Act
          Cellular modem LED Green for Cellular modem Link/ Act
          Fault Contact
          Relay Relay output to carry capacity of 3A at 24VDC
          Power
          Redundant Input Power Dual DC inputs. 12~48VDC on M23 connector (24VDC typ)
          Power Consumption 9.6 W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristics
          Enclosure IP-40
          Dimensions (W x D x H) 125(W) x 65(D) x 196(H) mm (4.92 x 2.56 x 7.72 inch.)
          Weight (g) 1050 g
          Environmental
          Storage Temperature -40 to 85C (-40 to 185F)
          Operating Temperature -20 to 70C (-4 to 158F)
          Operating Humidity 5% to 95% Non-condensing
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8, EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6,
          EN61373
          Cooling EN60068-2-1
          Dry Heat EN60068-2-2
          Safety EN60950-1
          Warranty 3 years
          Wireless router 3G, 2x 10/100 RJ-45 (WAN + LAN) + 1x 802.11a/b/g (WLAN) + 1x USB (ORing TAR-3120-M12)
          Net Price: CallCall

          #07885  

          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-1062+-4GS-M12)

          ORing’s TransporterTM series cellular router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAR-1062-4G-M12 is reliable IEEE802.11 a/b/g/n router with 2 ports LAN which is fully compliant with EN50155 certification. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular modem dial up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem. TGAR-1062-4G-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, TGAR-1062+-4G-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAR-1062-4G-M12 is one of the most reliable choices for rolling stock applications on the wireless network.
          Physical Ports
          10/100/1000 Base-T(X) Ports in M-12 Auto MDI/MDIX 2
          DIDO port in M12 (5-pin A-coding) 2 (DI x 4 and DO x 4)
          SIM Card Slot 1
          RS-232 Console port in M12 115200, 8 ,N ,1
          WLAN interface
          Antenna Connector 2 x External reverse SMA-type antenna connector
          Radio Frequency Type DSSS,
          OFDM
          Modulation IEEE802.11a OFDM with BPSK,
          QPSK,
          QAM,
          64QAM
          Modulation IEEE802.11b CCK,
          DQPSK,
          DBPSK
          Modulation IEEE802.11g OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          Modulation IEEE802.11n BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band America/FCC 2.412~2.462 GHz (11 channels),
          5.180~5.240 GHz & 5.745~5.825 GHz (9 channels),
          Europe CE/ETSI 2.412~2.472 Ghz (13 channels),
          5.180~5.240 GHz (4 channels)
          Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
          IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
          IEEE802.11n UP to 300 Mbps
          Transmit Power 802.11a 12dBm ± 1.5dBm@54Mbps,
          802.11b 17dBm ± 1.5dBm@11Mbps,
          802.11g 16dBm ± 1.5dBm@54Mbps,
          802.11gn HT20 15dBm ± 1.5dBm @MCS7,
          802.11gn HT40 14dBm ± 1.5dBm @MCS7,
          802.11an HT20 -74dBm ± 2dBm@MCS7,
          802.11an HT40 -71dBm ± 2dBm@MCS7
          Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
          802.11g -76dBm ± 2dBm@54Mbps,
          802.11gn HT20 -75dBm ± 2dBm@MCS7,
          802.11gn HT40 -72dBm ± 2dBm@MCS7
          Encryption Security WEP (64-bit ,128-bit key),
          WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
          802.1X/RADIUS Authentication supported,
          WPAPSK (256-bit key pre-shared key supported),
          TKIP encryption
          Wireless Security SSID broadcast disable
          Cellular Interface
          Cellular Standard GSM / GPRS/ EGPRS/EDGE / WCDMA /HSDPA / HSUPA/HSPA+ /LTE
          Antenna Connector 1 x SMA Female
          Band Option America(US) LTE - 700/1700/2100/MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/1900/2100MHz,
          GSM/GPRS/EDGE - 850/900/1800/1900MHz,
          Europe(EU) LTE - 800/900/1800/2100/2600MHz,
          UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 900/2100MHz,
          GSM/GPRS/EDGE - 900/1800/1900MHz
          Protocol Support ARP,
          BOOTP,
          DHCP,
          DNS,
          HTTPs,
          IP,
          ICMP,
          SNTP,
          TCP,
          UDP,
          RADIUS,
          SNMP,
          STP (IEEE 802.1D),
          RSTP
          LED Indicators
          Power Indicator 2 x LEDs,
          (PW1) Green On - Power is on,
          (PW2) Green On - Power is on or power by PoE
          100/1000Base-T(X) M-12 Port Indicator 2 x LEDs,
          Green for port Link/ Act
          WLAN LEDs 1 x LED,
          Green for WLAN Link/ Act
          WAN LED 1 x LED,
          Green for Cellular modem Link/ Act
          Fault 1 x LED,
          Red for Ethernet link down or power down indicator
          Fault Contact
          Relay Relay output to carry capacity of 3A at 24VDC
          Power
          Redundant Input Power Dual DC inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
          Power consumption (typical) 9.5W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 125.6mm x 65mm x 196.1mm
          Weight 968g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -2570C (-13158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6,
          EN61373
          Rail Traffic EN50155
          Cooling EN60068-2-1
          Dry Heat EN60068-2-2
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-1062+-4GS-M12)
          Net Price: CallCall

          #07887  

          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-2062+-4GS-M12)

          ORing’s TransporterTM series cellular router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAR-2062-4G-M12 is reliable IEEE802.11 a/b/g/n router with 2 ports LAN which is fully compliant with EN50155 certification. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular modem dial up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem. TGAR-2062-4G-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, TGAR-2062+-4G-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAR-2062-4G-M12 is one of the most reliable choices for rolling stock applications on the wireless network.
          Physical Ports
          10/100/1000 Base-T(X) Ports in M-12 Auto MDI/MDIX 2
          DIDO port in M12 (5-pin A-coding) 2 (DI x 4 and DO x 4)
          SIM Card Slot 2
          RS-232 Console port in M12 115200, 8 ,N ,1
          WLAN interface
          Antenna Connector 2 x External reverse SMA-type antenna connector
          Radio Frequency Type DSSS,
          OFDM
          Modulation IEEE802.11a OFDM with BPSK,
          QPSK,
          QAM,
          64QAM
          Modulation IEEE802.11b CCK,
          DQPSK,
          DBPSK
          Modulation IEEE802.11g OFDM with BPSK,
          QPSK,
          16QAM,
          64QAM
          Modulation IEEE802.11n BPSK,
          QPSK,
          16QAM,
          64QAM
          Frequency Band America/FCC 2.412~2.462 GHz (11 channels),
          5.180~5.240 GHz & 5.745~5.825 GHz (9 channels),
          Europe CE/ETSI 2.412~2.472 Ghz (13 channels),
          5.180~5.240 GHz (4 channels)
          Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
          IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
          IEEE802.11n UP to 300 Mbps
          Transmit Power 802.11a 12dBm ± 1.5dBm@54Mbps,
          802.11b 17dBm ± 1.5dBm@11Mbps,
          802.11g 16dBm ± 1.5dBm@54Mbps,
          802.11gn HT20 15dBm ± 1.5dBm @MCS7,
          802.11gn HT40 14dBm ± 1.5dBm @MCS7,
          802.11an HT20 -74dBm ± 2dBm@MCS7,
          802.11an HT40 -71dBm ± 2dBm@MCS7
          Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
          802.11g -76dBm ± 2dBm@54Mbps,
          802.11gn HT20 -75dBm ± 2dBm@MCS7,
          802.11gn HT40 -72dBm ± 2dBm@MCS7
          Encryption Security WEP (64-bit ,128-bit key),
          WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
          802.1X/RADIUS Authentication supported,
          WPAPSK (256-bit key pre-shared key supported),
          TKIP encryption
          Wireless Security SSID broadcast disable
          Cellular Interface
          Cellular Standard GSM / GPRS/ EGPRS/EDGE / WCDMA /HSDPA / HSUPA/HSPA+ /LTE
          Antenna Connector 2 x SMA Female
          Band Option America(US) LTE - 700/1700/2100/MHz UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/1900/2100MHz,
          GSM/GPRS/EDGE - 850/900/1800/1900MHz,
          Europe(EU) LTE - 800/900/1800/2100/2600MHz,
          UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 900/2100MHz,
          GSM/GPRS/EDGE - 900/1800/1900MHz
          Protocol Support ARP,
          BOOTP,
          DHCP,
          DNS,
          HTTPs,
          IP,
          ICMP,
          SNTP,
          TCP,
          UDP,
          RADIUS,
          SNMP,
          STP (IEEE 802.1D),
          RSTP
          LED Indicators
          Power Indicator 2 x LEDs,
          (PW1) Green On - Power is on,
          (PW2) Green On - Power is on or power by PoE
          100/1000Base-T(X) M-12 Port Indicator 2 x LEDs,
          Green for port Link/ Act
          WLAN LEDs 1 x LED,
          Green for WLAN Link/ Act
          WAN LED 2 x LED,
          Green for Cellular modem Link/ Act
          Fault 1 x LED,
          Red for Ethernet link down or power down indicator
          Fault Contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Redundant Input Power Dual DC inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
          Power consumption (typical) 15W
          Overload Current Protection Present
          Reverse Polarity Protection Present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 125.6mm x 65mm x 196.1mm
          Weight 1030g
          Environmental
          Storage Temperature -4085C (-40185F)
          Operating Temperature -2570C (-13158F)
          Operating Humidity 5%95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6,
          EN61373
          Rail Traffic EN50155
          Cooling EN60068-2-1
          Dry Heat EN60068-2-2
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Wireless router 4G, 2x 10/100/1000 M12 (LAN) + 1x 802.11b/a/g/n (WLAN) (ORing TGAR-2062+-4GS-M12)
          Net Price: CallCall



top

$