Communication for Industry
Friday, 21 September
Search for product:
#08453
Wireless DevicesORING NETWORKINGIGAP-420+

Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IGAP-420+)

IGAP-420 is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-420 by WEB interface via LAN port or WLAN interface. IGAP-420 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-420 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-420 is one of the best communication solutions for wireless applications on the industrial network..
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
PoE PD Port Present at ETH2,
Fully compliant with IEEE 802.3af Power Device specification,
Over load and short circuit protection,
Isolation Voltage 1000 VDC min.,
Isolation Resistance 100MΩ min
WLAN interface
Operating Mode AP/Bridge/Repeater/AP-Client
Antenna Connector 2 x External reverse SMA-type antenna connector
Radio Frequency Type DSSS
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11g/n OFDM with BPSK,
QPSK,
16QAM,
64QAM
Frequency Band America/FCC 2.412~2.462 GHz (11 channels),
Europe CE/ETSI 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 300 Mbps
Transmit Power 802.11b 17dBm ± 1.5dBm@11Mbps,
802.11g 16dBm ± 1.5dBm@54Mbps,
802.11gn HT20 15dBm ± 1.5dBm @MCS7,
802.11gn HT40 14dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
802.11g -76dBm ± 2dBm@54Mbps,
802.11gn HT20 -75dBm ± 2dBm@MCS7,
802.11gn HT40 -72dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
Protocol Support ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D)
LED Indicators
Power Indicator 3 x LEDs,
PWR1(2)(PoE) / Ready,
Red On - Power is on and booting up,
Green On - Power is on and functioning Normal
100/1000Base-T(X) RJ45 Port Indicator 2 x LEDs,
Green for port Link/ Act at 1000Mbps,
Amber for port Link/ Act at 100Mbps.
WLAN LEDs 1 x LED,
Green for WLAN Link/ Act
Fault 1 x LED,
Red for Ethernet link down or power down indicator
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block
Power consumption (typical) 8,5W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1155g
Environmental
Storage Temperature -4085C (-40185F)
Operating Temperature -1060C (14140F)
Operating Humidity 5%95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 3 years


Wireless Devices
expand groupexpand group [price]



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).