Communication for Industry
Friday, 18 January
Search for product:
#06533
NEW
Wireless DevicesORING NETWORKINGIGAP-6620+

Wireless access point, 2x 10/100/1000 (LAN) PoE + 2x 802.11b/a/g/n (WLAN) (ORing IGAP-6620+)

IGAP-6620+ is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and dual RF in IEEE 802.11 a/b/g/n wireless modules. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-6620+ by WEB interface via LAN port or WLAN interface. IGAP-6620+ provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-6620+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-6620 is one of the best communication solutions for wireless applications on the industrial network.
Physical Ports
10/100/1000 Base-T(X) Ports Auto MDI/MDIX 2 (Present at ETH2 Fully compliant with IEEE 802.3af PoE P.D)
5-Pin Terminal Block 2(DI x 4 and DO x 4),
Dry Contact- On short to GND,
Off open,
Wet Contact (DI to COM/GND) - On 0 to 3VDC,
Off 10 to 30VDC
RS-232 Console port in DB9 115200, 8 ,N ,1
WLAN interface
Operating Mode AP/Bridge/Repeater/AP-Client
Antenna Connector 4 x External reverse SMA-type antenna connector
Radio Frequency Type DSSS
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11a/g OFDM
Modulation IEEE802.11n BPSK,
QPSK,
16QAM,
64QAM
Frequency Band 2.412~2.472 Ghz (13 channels),
5.180~5.240 GHz (4 channels)
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 300 Mbps
Transmit Power 802.11a 12dBm ± 1.5dBm@54Mbps,
802.11b 17dBm ± 1.5dBm@11Mbps,
802.11g 16dBm ± 1.5dBm@54Mbps,
802.11gn HT20 15dBm ± 1.5dBm @MCS7,
802.11gn HT40 14dBm ± 1.5dBm @MCS7,
802.11an HT20 -74dBm ± 2dBm@MCS7,
802.11an HT40 -71dBm ± 2dBm@MCS7
Receiver Sensitivity 802.11b -85dBm ± 2dBm@11Mbps,
802.11g -76dBm ± 2dBm@54Mbps,
802.11gn HT20 -75dBm ± 2dBm@MCS7,
802.11gn HT40 -72dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
Protocol Support ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D),
RSTP,
PPPoE
LED Indicators
Power Indicator 3 x LEDs,
PWR1(2)(PoE) / Ready,
Red On - Power is on and booting up,
Green On - Power is on and functioning Normal
100/1000Base-T(X) Port Indicator 2 x LEDs,
LNK/ACT - Green for port Act.,
Speed - Green for port Link at 1000Mbps,
Amber for port Link at 100Mbps. Off for port Link at 10Mbps
WLAN LEDs 2 x Green Solid On RF on,
Blink- data transmitting,
2 x Green for WLAN work on 2.4GHz,
2 x Green for WLAN work on 5GHz
Power
Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power consumption (typical) 11W
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.)
Weight 1250g
Environmental
Storage Temperature -4085C (-40185F)
Operating Temperature -1060C (14140F)
Operating Humidity 5%95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27,
EN61373
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years


Wireless Devices
expand groupexpand group [price]



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).