Atel Electronics
[-]remove#07976 [-]remove#07964
Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP) Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)
Environmental
Storage Temperature -40÷85°C(-40÷185°F) -40÷85°C
Operating Temperature -40÷70°C (-40÷158°F) -40÷75°C
Operating Humidity 5%÷95% Non-condensing 5%÷95% Non-condensing
LED Indicators
Power indicator - Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
10/100TX RJ45 port indicator - Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator - Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator - Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator Green - PoE enabled LED x 8 Amber for P.S.E. indicator
Power Indicator (PWR) Green Power LED x 3 -
Ring Master indicator Green - indicates system operated in O-Ring Master mode -
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
-
Fault indicator Amber - Indicates unexpected event occurred -
100/1000Base-X SFP Port Indicator Green for port Link/Act. -
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator -
Physical Characteristic
Enclosure IP-30 IP-30
Dimension - 40mm x 70mm x 95mm
Weight 1270g 291g
Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm -
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8 -
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) - 1
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4 -
1000Base-FX (SFP) - 1
100/1000 SFP 2 -
Processing - Store-and-Forward
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1) -
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block Dual 50~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (typical) 13.2Watts (power device not included) 4 Watts (P.S.E. output included)
Overload current protection present present
Reverse polarity protection not present present
PoE Power Output 50 ~ 57VDC total power budget is 240Watts with maximum 30Watts per port -
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27 IEC60068-2-27
Free Fall IEC60068-2-32 IEC60068-2-32
Vibration IEC60068-2-6 IEC60068-2-6
Safety EN60950 EN60950-1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
I
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
DIP-Switch setting - DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex
MAC Table 8192 MAC addresses -
Priority Queues 8 -
Processing Store-and-Forward -
Switching latency 7 µs -
Switching bandwidth 28 Gbps -
Max. Number of Available VLANs 256 -
IGMP multicast groups 128 for each VLAN -
Port rate limiting User Define -
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
-
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast
-
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
-
Warranty
Warranty period 5 years 5 years
Net Price 1 110,00 EUR 153,00 EUR

« return to products list