This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 28 March
Search for product:
 INDUSTRIAL ACCESS POINTS
#06531

Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+)

IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2 (one port with PoE)
PoE PD Port Present at ETH,
Fully compliant with IEEE 802.3af Power Device specification,
Over load and short circuit protection,
Isolation Voltage 1000 VDC min.,
Isolation Resistance 108MΩ min
WLAN interface
Operating Mode AP/Bridge/Bridge/AP-Client
Antenna Connector 1 x External reverse SMA-type antenna connector
Radio Frequency Type DSSS,
OFDM
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11g/n OFDM with BPSK,
QPSK,
16QAM,
64QAM
Frequency Band 2.412~2.472 Ghz (13 channels)
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
Transmit Power 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7,
802.11n HT40 14.5dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Wireless Security SSID broadcast disable
Protocol Support ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D)
LED Indicators
Power Indicator LED x 3,
PWR 1, 2,
(PoE),
Green On- Power is on and functioning Normally.
10/100Base-T(X) RJ45 Port Indicator 2 x LEDs,
Green for port Link/ Act
WLAN LEDs LED,
Green (blinking) for WLAN
Power
Redundant Input Power Dual DC inputs. 12~48VDC on 4-pin terminal block
Power consumption (typical) 4W
Overload Current Protection Present
Reverse Polarity Protection Present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41(W)x81(D)x95(H) mm
Weight 292g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IAP-420+, Industrial Wireless Access Point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN)
* For special orders only
Net Price: 264,00 EUR  Unit: pcs  VAT: 23%

 INDUSTRIAL 4G ROUTERS
#06535

Wireless router 4G LTE, 2x 10/100 RJ-45 (LAN) + 1x 802.11b/g/n (WLAN) + 1x RS-232/422/485 (ORing IMG-4312-4G)

IMG-4312-4G is an innovative 1 port RS-232/422/485 and 4G LTE cellular Gateway with 2 port 10/100Base-T(X) port. IMG-4312-4G also provide IEEE802.11 b/g/n wifi interface which have 150Mbps link speed. It could be configured to connect to the internet by dialing up 2G/3.5G/LTE cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-4312-4G can also transfer data into 5 host PCs simultaneously for backup purposes. In addition, IMG-4312+-4G also provides P.D. feature on ETH1 port which is fully compliant with IEEE802.3af PoE P.D. specification Therefore, IMG-4312-4G is one of the best solutions for applications of wireless and serial communication.
Physical Ports
10/100 Base-T(X) Ports RJ-45 Auto MDI/MDIX 2
SIM Card Slot 1 (Only Mini SIM without adapter)
WLAN interface
Antenna Connector 1 x RP-SMA Female
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11g/n OFDM with BPSK,
QPSK,
16QAM,
64QAM
Frequency Band 2.412~2.472 Ghz
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
Transmit Power 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7,
802.11n HT40 14.5dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Cellular Interface
Antenna Connector 2 x RP-SMA Female
Cellular Standard GSM/GPRS/EGPRS/EDGE/WCDMA/HSDPA/HSUPA/LTE
Band Option Europe(EU grade) LTE - 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHz,
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/900/1900/2100 MHz,
GSM/GPRS/EDGE - 850/900/1800/1900 MHz
Serial Ports
Connector DB9 x1
Operation Mode RS-232,
RS-422,
RS-485 4/2-wire,
can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 7, 8
Parity odd,
even,
none,
mark,
space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire) Data+, Data-, GND
Flow Control XON/XOFF,
RTS/CTS,
DTR/DSR
Network Protocol ICMP,
IP,
TCP,
UDP,
DHCP,
BOOTP,
DNS,
SNMP V1/V2c,
HTTPS
LED Indicators
Power Indicator 3 x LEDs,
Green On - Power is on
10/100TX RJ45 port indicator 2 x LEDs,
Green for port Link/Act at 100Mbps.
Serial TX / RX LEDs Red - Serial port is receiving data,
Green - Serial port is transmitting data
WIFI LEDs 1 x LED,
Green for WiFi Link/ Act
WAN LED 1 x LED,
Green for Cellular modem Link/ Act
Power
Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power consumption (typical) 3W
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 45(W)x80.6(D)x95(H) mm
Weight 368g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (14÷130°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IMG-4312-4G, Industrial Wireless Router 4G LTE, 2x 10/100 RJ-45 (LAN) + 1x 802.11b/g/n (WLAN) + 1x RS-232/422/485
* For special orders only
Net Price: 778,00 EUR  Unit: pcs  VAT: 23%