This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Tuesday, 19 March
Search for product:
 PoE SWITCHES SMART OR MANAGED
#07996

Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-24V)

IPS-3082GC-24V is managed redundant ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With completely support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-3082GC-24V supports wide range 24~36VDC power inputs and generates 48VDC P.S.E. power output per port. Each IPS-3082GC-24V switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC-24V support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All function of IPS-3082GC-24V can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application with PoE function.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
SNTP for synchronizing of clocks over network,
Support PTP Client (Precision Time Protocol) clock synchronization,
DHCP Server / Client support,
Support ModbusTCP,
Port Trunk support,
MVR (Multicast VLAN Registration) support
Network Redundancy STP,
RSTP,
MSTP,
O-Ring,
Open-Ring,
O-RSTP
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power /PoE Indicator Green - Ready LED x 3,
Green - PoE LED x 8
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
1000X / Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block
Power consumption (typical) 11.52W
Overload current protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1260g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-3082GC-24V, Industrial 10-port managed PoE Ethernet switch, DIN, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 982,00 EUR  Unit: pcs  VAT: 23%

#08849

Managed switch, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms (ORing IPS-3082GC-AT)

IPS-3082GC-AT is a managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) ports with PoE (P.S.E.) function and 2xGigabit combo ports. With complete support of Ethernet redundancy protocols, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-3082GC also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS-3082GC switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-3082GC supports new a DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electronic voltage, current and temperature. All functions of IPS-3082GC can be managed centralizedly by a powerful windows utility — Open-Vision. In addition, the wide operating temperature, range from -40 to 70°C, can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application with PoE function.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 8
1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Supports Q-in-Q VLAN for performance & security to expand the VLAN space,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
SNTP for synchronizing of clocks over network,
Support PTP Client (Precision Time Protocol) clock synchronization,
DHCP Server / Client support,
Support ModbusTCP,
Port Trunk support,
MVR (Multicast VLAN Registration) support
Network Redundancy STP,
RSTP,
MSTP,
O-Ring,
Open-Ring,
O-RSTP
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power /PoE Indicator Green - Ready LED x 3,
Green - PoE LED x 8
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
1000X / Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50÷57VDC on 6-pin terminal block
Power consumption (typical) 7.68W
Overload current protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1185g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-3082GC-AT, Industrial 10-port managed PoE Ethernet switch, DIN, 8x 10/100 RJ-45 PoE+ + 2 slide-in SFP slots w/DDM / RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 659,00 EUR  Unit: pcs  VAT: 23%

#07656

Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP)

IGPS-9084GP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.),
IEEE 1588-2002
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 28 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 13.2Watts (power device not included)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
Weight 1205g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-9084GP, Industrial 12-port managed Gigabit PoE Ethernet switch, DIN, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 1 160,00 EUR  Unit: pcs  VAT: 23%

#06521

Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-60W)

IGPS-9084GP-60W is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) 60Watts P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9084GP-60W switch has 8x10/100/1000Base-T(X) 60Watts P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-60W can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE++ specification (up to 60 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 24 Gbps
Throughput (packet per second) 14.8Mpps@64Bytes packet
Max. Number of Available VLANs 256
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 13.2Watts (power device not included)
PoE Power Budget 240 Watts
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch)
Weight 1290g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGPS-9084GP-60W, Industrial Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 1 260,00 EUR  Unit: pcs  VAT: 23%

#07997

Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9084GP-LA-24V)

IGPS-9084GP-LA-24V is a managed redundant ring PoE Ethernet switch with 4x10/100/1000Base-T(X) IEEE 802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9042GP-24V also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9042GP-24V switch has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40°C to 75°C. IGPS-9042GP-24V can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed PoE and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 12 Gbps
Max. Number of Available VLANs 4095
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green Power LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Power
Input power Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block
Power consumption (typical) 13.2 Watts (power device not included)
PoE Power Output 12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port,
24 ~ 57VDC - total power budget is 120Watts with
maximum 30Watts per port
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3 x 120 x 145.1 mm
Weight 924g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGPS-9084GP-LA-24V, Managed switch,  8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 839,00 EUR  Unit: pcs  VAT: 23%

#06520

Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGPS-9084GP-LA)

IGPS-9084GP-LA is layer2 managed PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-LA also support Power over Ethernet, a system to transmit electrical power up to 30 watts, total PoE power budget is 240W max, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-9084GP-LA switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. IGPS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 24 Gbps
Throughput (packet per second) 17.856Mpps@64Bytes
Max. Number of Available VLANs 256
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 13.2Watts (power device not included)
PoE Power Budget 240 Watts
Hi-POT 1.5KV AC
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
Weight 779g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
MTBF 516416hrs
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGPS-9084GP-LA, Industrial Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing
Net Price: 677,00 EUR  Unit: pcs  VAT: 23%

#07640
SELL OUT

Managed switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms (ORing RGPS-9084GP-P-EU)

RGPS-9084GP-P is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、Fast Recovery、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.


RGPS-9084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts (-40 ~ 60°C provided total 240watts max., and 60 to 75°C provided total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-9084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 °C to 75 °C. RGPS-9084GP-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices and highly-managed Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE): 8 (-40 ~ 60oC : provided total 240watts maximum, 60 ~ 75oC : provided total 120watts maximum)
1000 SFP: 4
RS-232 Serial Console Port: RS-232 in RJ45 connector with console cable (115200bps 8 N 1) (support backup unit DBU-01)
Technology
Ethernet Standards: IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100Base-FX, IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table: 8192 MAC addresses
Priority Queues: 4
Processing: Store-and-Forward
Switching latency: 7 µs
Switching bandwidth: 24 Gbps
Max. Number of Available VLANs: 256
IGMP multicast groups: 128/VLAN
Port rate limiting: User Define
Security Features: Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP, NTP server
Network Redundancy: STP, RSTP, O-Ring, MSTP
LED Indicators
Ring Master indicator: Green - indicates system operated in O-Ring Master mode
Fault indicator: Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator: Green for port Link/Act, Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator: Green for port Link/Act, Amber for 100Mbps
Fiber port indicator: Green for port Link/Act
PoE indicator: Blue PoE LED x 8
Power
Input power: 100~240VAC, 50~60Hz (power supply included)
Power consumption (typical): 260Watts (Typ.)
Overload current protection: present
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 443.7 x 230 x 44 mm
Weight: 3730 g
Environmental
Storage Temperature: -40÷85°C(-40÷185°F)
Operating Temperature: -40÷70°C (-40÷158°F)
Operating Humidity: 5%÷95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950
Warranty
Warranty period: 5 years
ORING NETWORKING
RGPS-9084GP-P-EU, Industrial 12-port rack mount managed Gigabit PoE Ethernet switch, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <30ms
Net Price: 955,00 EUR  Unit: pcs  VAT: 23%

#07976

Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP)

ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100/1000 SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 28 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green Power LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 13.2Watts (power device not included)
PoE Power Output 50 ~ 57VDC total power budget is 240Watts with maximum 30Watts per port
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
Weight 1270g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-9842GTP, Industrial Managed switch, DIN, 8x 1G RJ-45 PoE + 4x 1G RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 1 260,00 EUR  Unit: pcs  VAT: 23%

#07977

Managed switch, 8x 10/1000 RJ-45 PoE + 4x 10/1000 RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-9842GTP-24V)

ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. IGPS-9842GTP is managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports which is compliant with EN50155 request. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9842GTP also support Power over Ethernet, a system to transmit electrical power up to 30 watts (total 120watts max.), along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-9842GTP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 70 oC. IGPS-9842GTP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100/1000 SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 28 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green Power LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
PoE indicator Green - PoE enabled LED x 8
Power
Input power Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block
Power consumption (typical) 13.2Watts (power device not included)
PoE Power Output 12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port,
24 ~ 57VDC - total power budget is 120Watts with
maximum 30Watts per port
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3 x 109.2 x 153.6 mm
Weight 1270g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-9842GTP-24V, Industrial Managed switch, DIN, 8x1G RJ-45 PoE + 4x 1G RJ-45 + 2 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 1 410,00 EUR  Unit: pcs  VAT: 23%

#07980

Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-LP)

RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
8,
N,
1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 52 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128/VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
MSTP
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
10/100/1000TX RJ45 port indicator Green for port Link/Act
Fiber port indicator Green for port Link/Act
PoE indicator Green PoE LED x 24
Power
Input power 100~240VAC with power socket
Power supply 450 Watts power supply included (320W power budget)
Power consumption (typical) 37Watts (Typ.)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 5000 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
RGPS-92222GCP-NP-LP, Industrial Managed Switch, 22x 1G RJ-45 PoE + 2x 1G COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19"
* For special orders only
Net Price: 1 800,00 EUR  Unit: pcs  VAT: 23%

#07981

Managed switch, 22x 10/1000 RJ-45 PoE + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19" (ORing RGPS-92222GCP-NP-P)

RGPS-92222GCP-NP series are Gigabit managed redundant ring PoE Ethernet switch with 22x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 2xGigabit combo IEEE802.3at P.S.E. ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-92222GCP-NP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-92222GCP-NP switch has (22+2)x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-92222GCP-NP / -P models support wide operating temperature from -40 oC to 70 oC. RGPS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 22
Gigabit Combo port with 10/100/1000Base-T(X) P.S.E. and 100/1000Base-X SFP ports 2
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
8,
N,
1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 52 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128/VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
MSTP
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
10/100/1000TX RJ45 port indicator Green for port Link/Act
Fiber port indicator Green for port Link/Act
PoE indicator Green PoE LED x 24
Power
Input power 100~240VAC with power socket
Power supply 1000 Watts power supply included (720W power budget)
Power consumption (typical) 37Watts (Typ.)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 5730 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
RGPS-92222GCP-NP-P, Industrial Managed Switch, 22x 1G RJ-45 PoE + 2x 1G COMBO with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms, 19"
* For special orders only
Net Price: 2 100,00 EUR  Unit: pcs  VAT: 23%

#07986

Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-LP)

RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
1G/10GBase-X with SFP+ port 4
RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
8,
N,
1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128/VLAN
Port rate limiting User Define
Security Features Hardware routing,
RIP and static routing,
IEEE 1588v2 clock synchronization,
IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client,
DHCP Relay,
Modbus TCP,
DNS client proxy,
SMTP Client
Network Redundancy STP,
RSTP,
O-Ring,
MSTP
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator 1G/10G Green for port Link/Act
PoE indicator Blue PoE LED x 24
Power
Input power 100~240VAC with power socket
Power supply 400W
Power consumption (typical) 75Watts (Typ.)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 431 x 342 x 44 mm
Weight 6520 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
RGPS-R9244GP+-LP, Industrial Layer-3 28-port managed Gigabit PoE Ethernet switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3
* For special orders only
Net Price: 2 820,00 EUR  Unit: pcs  VAT: 23%

#07985

Managed switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3 (ORing RGPS-R9244GP+-P)

RGPS-R9244GP+-P is Layer-3 Gigabit managed redundant ring PoE Ethernet switch with 24x10/100/1000Base-T(X) IEEE802.3at P.S.E. ports and 4x1G/10GBase-X SFP+ ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGPS-R9244GP+-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-R9244GP+-P switch had 24x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And RGPS-R9244GP+-P support wide operating temperature from -40 oC to 60 oC. RGPS-R9244GP+-P can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 24
1G/10GBase-X with SFP+ port 4
RS-232 Serial Console Port RS-232 in DB9 connector with console cable (115200bps,
8,
N,
1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128/VLAN
Port rate limiting User Define
Security Features Hardware routing,
RIP and static routing,
IEEE 1588v2 clock synchronization,
IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client,
DHCP Relay,
Modbus TCP,
DNS client proxy,
SMTP Client
Network Redundancy STP,
RSTP,
O-Ring,
MSTP
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator 1G/10G Green for port Link/Act
PoE indicator Blue PoE LED x 24
Power
Input power 100~240VAC with power socket
Power supply 1000 Watts power supply included (-40 ~ 55°C PoE output 720W Max.,
55 ~ 60°C PoE output 360W Max.)
Power consumption (typical) 75Watts (Typ.)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 431 x 342 x 44 mm
Weight 6520 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
RGPS-R9244GP+-P, Industrial Layer-3 28-port Managed Gigabit PoE Ethernet Switch, 24x 10/1000 RJ-45 PoE + 4 1G/10G SFP+ slots, O/Open-Ring <30ms, L3
* For special orders only
Net Price: 3 160,00 EUR  Unit: pcs  VAT: 23%

#07920

Managed switch, L3, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms (ORing IGPS-R9084GP)

IGPS-R9084GP is Layer-3 managed redundant ring PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. ports and 4x100/1000Base-X SFP ports. The IGPS-R9084GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-R9084GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-R9084GP switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection and support wide operating temperature from -40°C to 75°C. IGPS-R9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 24 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features Hardware routing,
RIP and static routing,
IEEE 1588v2 clock synchronization,
IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
RSTP/MSTP (IEEE 802.1w/s),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
Voice VLAN,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client/snooping,
DHCP Relay,
Modbus TCP,
ARP inspection,
SMTP Client
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green - Power LED x 2
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
PoE indicator Green - PoE enabled LED x 8
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 19Watts (PoE output not included)
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4 (W) x 108.5 (D) x 154 (H) mm
Weight 1560g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-R9084GP, Industrial Managed Switch, L3, DIN, 8x 10/1000 RJ-45 PoE + 4 slide-in SFP slots, O/Open-Ring <20ms
* For special orders only
Net Price: 1 410,00 EUR  Unit: pcs  VAT: 23%

#06589

Smart switch, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms (ORing IPS-2042TX)

IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 696g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-2042TX, Industrial 6-port lite-managed PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 10/100 RJ-45, O-Ring <10ms
* For special orders only
Net Price: 457,00 EUR  Unit: pcs  VAT: 23%

#06590

Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms (ORing IPS-2042FX-MM-SC)

IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 709g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-2042FX-MM-SC, Industrial 6-port lite-managed PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, O-Ring <10ms
* For special orders only
Net Price: 584,00 EUR  Unit: pcs  VAT: 23%

#07646

Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms (ORing IPS-2042P)

IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x100Base-FX SFP ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
100 Base-FX SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.2mm x 106.1mm x 145.4mm
Weight 709g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-2042P, Industrial 6-port lite-managed PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 SFP, O-Ring <10ms
Net Price: 491,00 EUR  Unit: pcs  VAT: 23%

#06592

Smart switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms (ORing IPS-2042FX-SS-SC)

IPS-2042TX/2042FX are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX can be managed centralized and convenient by a powerful windows utility, Open-Vision. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) 4
100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB dla LLDP (Link Layer Discovery Protocol),
IEEE 802.3af PoE specification (up to 25 Watts per port for PSE)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 709g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-2042FX-SS-SC, Industrial 6-port lite-managed PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, O-Ring <10ms
* For special orders only
Net Price: 641,00 EUR  Unit: pcs  VAT: 23%

 PoE SWITCHES UNMANAGED
#07990

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FA-MM-SC)

PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 6.78W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 395g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1042-FA-MM-SC, Industrial 6-port slim, unmanaged PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 MM SC
* For special orders only
Net Price: 398,00 EUR  Unit: pcs  VAT: 23%

#07992

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing (ORing IPS-1042-FX-MM-SC-24V)

IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
Power consumption (typical) 6.78W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 94.9m x 144.3mm
Weight 530g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1042-FX-MM-SC-24V, Industrial 6-port slim unmanaged PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 MM SC, slim housing
* For special orders only
Net Price: 461,00 EUR  Unit: pcs  VAT: 23%

#07993

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V)

IPS-1042FX-24V series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FX-24V series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FX-24V series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FX-24V series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~57VDC on 6-pin terminal block
Power consumption (typical) 5.6W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 94.9m x 144.3mm
Weight 530g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1042-FX-SS-SC-24V, Industrial Unmanaged PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 SM SC
* For special orders only
Net Price: 520,00 EUR  Unit: pcs  VAT: 23%

#07991

Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC)

PS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS-1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70oC can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
100Base-FX Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 5.6W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 395g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1042-FA-SS-SC, Industrial Unmanaged PoE Ethernet switch, DIN, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing
* For special orders only
Net Price: 430,00 EUR  Unit: pcs  VAT: 23%

#07972

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GP-24V)

IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
Power consumption (typical) 6.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 410g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1042GP-24V, Industrial 6-port unmanaged Gigabit PoE Ethernet switch, DIN, 4x 10/1000 RJ-45 P.S.E. + 2x 1000 SFP
* For special orders only
Net Price: 441,00 EUR  Unit: pcs  VAT: 23%

#07971

Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
Power consumption (typical) 6.3W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 410g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷185°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1042GPA, Industrial 6-port slim, unmanaged Gigabit PoE Ethernet switch, DIN, 4x 10/1000 RJ-45 P.S.E. + 2x 1000 SFP
* For special orders only
Net Price: 393,00 EUR  Unit: pcs  VAT: 23%

#08432

Unmanaged switch, 4x 10/100/1000 RJ-45 PoE, Gigabit PoE Ethernet, PCIe slot (ORing IGPCS-E140)

IGPCS-E140 is a PCI-Express unmanaged Gigabit PoE Ethernet switch card with P.S.E. function, IGPCS-E140 supports 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE port. IGPCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. Therefore, IGPCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 With P.S.E. 4
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (total power budget is 65Watts with maximum 30Watts per port)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 1
PoE Power Indicator Green - PoE power LED x 1
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Green for port Link/Act,
Green for PoE power injected.
Power
Input power PCIe bus-powered(for switch card system) / 12VDC of ATX power(for PoE)
Power consumption (typical) 4.2 W (power device not included)
PoE output power IEEE802.3at/af compliant,
up to 30 Watts per port,
totally 65 Watts maximum
Overload current protection present
Physical Characteristic
Dimension (WxDxH) 21.3mm x 178mm x 121mm
Weight 150g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (14÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Operating System Supports
Microsoft System DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8
Unix (Linux) Linux for Kernel 3.x / 2.6.x / 2.4.x,
FreeBSD for 7.x / 8.0,
SCO OpenServer for 6 / UnixWare 7.1.x
Novell Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x)
Others MacOS 10.4 / 10.5 / 10.6 / 10.7
Warranty
Warranty period 5 years

#07645

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
Amber for 100Mbps indicator
100/1000Base-X port indicator Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (typical) 6.2W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
Weight 407 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1411GTPA, Industrial Unmanaged switch, DIN, 4x 1G RJ-45 PoE, 1x 1G RJ-45, 1x 1G SFP socket, slim housing
* For special orders only
Net Price: 365,00 EUR  Unit: pcs  VAT: 23%

#08433

Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
Amber for 100Mbps Indicator
100/1000Base-X SFP port indicator Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
Power consumption (typical) 6.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
Weight 580 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷60°C (-40÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1411GTP-24V, Industrial Unmanaged Switch, DIN, 4x 1G RJ-45 PoE, 1x 1G RJ-45, 1x 1G SFP socket, slim housing
* For special orders only
Net Price: 420,00 EUR  Unit: pcs  VAT: 23%

#07989

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080-24V)

IPS-1080 is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 2x 12~57VDC on 6-pin terminal block
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 412g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1080A-24V, Industrial 8-port unmanaged Gigabit PoE Ethernet switch, DIN, 8x 10/100 RJ-45 PoE, slim housing, 24VDC power inputs
Net Price: 398,00 EUR  Unit: pcs  VAT: 23%

#07988

Unmanaged switch, 8x 10/100 RJ-45 PoE, slim housing (ORing IPS-1080A)

IPS-1080A is slim type unmanaged PoE Ethernet switch with P.S.E. function. IPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1080A switch has 8X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50VDC on 6-pin terminal block
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 412g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IPS-1080A, Industrial 8-port slim unmanaged PoE Ethernet switch, DIN, 8x 10/100 RJ-45 PoE, slim housing
Net Price: 318,00 EUR  Unit: pcs  VAT: 23%

#06517

Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k MAC addresses
Processing Store-and-Forward
Switch Properties Switching latency less than 7us,
Switching bandwidth 20Gbps
Jumbo frame Up to 9.6K Bytes
Packet buffer 4Mbit
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Amber - Indicate power failed even warning
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator Green for port Link/Act
DIP Switch
DIP-Switch 1 Power-1 failed warning (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning (ON) enable,
(OFF) disable
DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
Power consumption (typical) 11W
PoE Power budget 180W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
Weight 889g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC EN55032,
EN55024(CE EMC),
FCC Part 15B,
EN61000-3-2,
EN61000-3-3
EMI CISPR 32,
EN55032,
FCC Part 15B class A
EMS IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF),
IEC 61000-4-11 (DIP)
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGPS-1082GP, Industrial Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing
Net Price: 609,00 EUR  Unit: pcs  VAT: 23%

#06518

Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)

IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8k MAC addresses
Processing Store-and-Forward
Switch Properties Switching latency less than 7us,
Switching bandwidth 20Gbps
Jumbo frame Up to 9.6K Bytes
Packet buffer 4Mbit
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Amber - Indicate power failed even warning
10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
Green for PoE power injected
1000X SFP port Indicator Green for port Link/Act
DIP Switch
DIP-Switch 1 Power-1 failed warning (ON) enable,
(OFF) disable
DIP-Switch 2 Power-2 failed warning (ON) enable,
(OFF) disable
DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12-57 VDC on 6-pin terminal block
Power consumption (typical) 11W
PoE Power budget 60W at 12~24VDC,
120W at 24~57VDC
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
Weight 916g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC EN55032,
EN55024(CE EMC),
FCC Part 15B,
EN61000-3-2,
EN61000-3-3
EMI CISPR 32,
EN55032,
FCC Part 15B class A
EMS IEC 61000-4-2 (ESD),
IEC 61000-4-3 (RS),
IEC 61000-4-4 (EFT),
IEC 61000-4-5 (Surge),
IEC 61000-4-6 (CS),
IEC 61000-4-8 (PFMF),
IEC 61000-4-11 (DIP)
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGPS-1082GP-24V, Industrial Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing
* For special orders only
Net Price: 677,00 EUR  Unit: pcs  VAT: 23%

#07642

Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080-24V)

IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Green and Amber on for 100Mbit,
Amber on only for 10Mbit
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~36VDC on 6-pin terminal block.
Power consumption (typical) 7,8W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41(W) x 94.9(D) x 144.3(H) mm
Weight 452 g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1080-24V, Industrial 8-port unmanaged Gigabit PoE Ethernet switch, DIN, 8x 10/1000 RJ-45 PoE, slim housing
Net Price: 414,00 EUR  Unit: pcs  VAT: 23%

#08166

Unmanaged switch, 8x 10/1000 RJ-45 PoE, slim housing (ORing IGPS-1080A)

IGPS-1080A is unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1080A supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080A switch has 8X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

IGPS-1080A can be used in connecting several PoE P.D. Ethernet devices like IP-Camera or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 50VDC on 6-pin terminal block
Power consumption (typical) 8W
PoE Power budget 180W
Overload current protection present
Reverse polarity protection not present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 390g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IGPS-1080A, Industrial 8-port slim type unmanaged Gigabit PoE Ethernet switch, DIN, 8x 10/1000 RJ-45 PoE
Net Price: 400,00 EUR  Unit: pcs  VAT: 23%

 FAST ETHERNET / UNMANAGED SWITCHES
#06654

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 MM SC, slim housing (ORing IES-1041FX-MM-SC)

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Multimode ports (2km, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 378g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1041FX-MM-SC, Industrial Slim Type 5-port Unmanaged Ethernet Switch, DIN, 4x 10/100 RJ-45 + 1x 100 MM SC, slim housing
* For special orders only
Net Price: 184,00 EUR  Unit: pcs  VAT: 23%

#06655

Unmanaged switch, 4x 10/100 RJ-45 + 1x 100 SM SC, slim housing (ORing IES-1041FX-SS-SC)

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Singlemode ports (30km, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 378g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1041FX-SS-SC, Industrial Slim Type 5-port Unmanaged Ethernet Switch, DIN, 4x 10/100 RJ-45 + 1x 100 SM SC, slim housing
* For special orders only
Net Price: 198,00 EUR  Unit: pcs  VAT: 23%

#06656

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 MM SC, slim housing (ORing IES-1042FX-MM-SC)

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 382g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1042FX-MM-SC, Industrial Slim Type 6-port Unmanaged Ethernet Switch, DIN, 4x 10/100 RJ-45 + 2x 100 MM SC, slim housing
Net Price: 227,00 EUR  Unit: pcs  VAT: 23%

#06657

Unmanaged switch, 4x 10/100 RJ-45 + 2x 100 SM SC, slim housing (ORing IES-1042FX-SS-SC)

IES-1041FX/1042FX series are unmanaged Ethernet switches with 4 x 10/100Base-T(X) and 100Base-FX ports. IES-1041FX/1042FX series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 382g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1042FX-SS-SC, Industrial Slim Type 6-port Unmanaged Ethernet Switch, DIN, 4x 10/100 RJ-45 + 2x 100 SM SC, slim housing
* For special orders only
Net Price: 255,00 EUR  Unit: pcs  VAT: 23%

#07961

Unmanaged switch, 5x 10/100 RJ-45, slim housing (ORing IES-1050)

IES-1050 is unmanaged Ethernet switch with 5x10/100TX ports. With very compact size of housing, you can install IES-1050 easily. In addition, IES-1050 is with rigid IP-30 housing design and can operate under harsh environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Power
Input power 9÷30VDC
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 87.6mm x 23.75mm x 102.2mm
Weight 305g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1050, Industrial 5-port Unmanaged Ethernet Switch, DIN, 5x 10/100 RJ-45, slim housing
* For special orders only
Net Price: 74,10 EUR  Unit: pcs  VAT: 23%

#06652

Unmanaged switch, 5x 10/100 RJ-45, slim housing (ORing IES-1050A)

IES-1050A is unmanaged Ethernet switches with 5 or 8 x 10/100Base-T(X) ports. IES-1050A support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 3.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 382g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1050A, Unmanaged switch, DIN, 5x 10/100 RJ-45, slim housing
* For special orders only
Net Price: 112,00 EUR  Unit: pcs  VAT: 23%

#08159

Unmanaged switch, 5x 10/100 RJ-45, slim housing (ORing IES-150B)

IES-150B is an unmanaged Ethernet switch with 5x10/100Base-T(X) ports. With very mini size of housing, you can install IES-150B easily. In addition, IES-150B is with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -40 to 70°C is ready and can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 70mm x 95mm
Weight 205g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-150B, Industrial 5-port mini type unmanaged Ethernet switch, DIN, 5x 10/100 RJ-45, slim housing
Net Price: 92,00 EUR  Unit: pcs  VAT: 23%

#06610

Unmanaged switch, 5x 10/100 RJ-45, slim housing (ORing IES-C1050)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power single. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26mm x 64mm x 103mm
Environmental
Storage Temperature -10÷60°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
Unmanaged switch,  5x 10/100 RJ-45, slim housing (ORing IES-C1050)
Net Price: 70,00 EUR  Unit: pcs  VAT: 23%

#06595
SELL OUT

Unmanaged switch, 6x 10/100 RJ-45 + 2x 10/1000 RJ-45 (ORing IES-1062GT)

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
1000 Base-T Ports in RJ45 Auto MDI/MDIX 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000BaseTX,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 677g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1062GT, Industrial 8-port Unmanaged Ethernet Switch, DIN, 6x 10/100 RJ-45 + 2x 10/1000 RJ-45
Net Price: 225,00 EUR  Unit: pcs  VAT: 23%

#06605

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100 MM SC (ORing IES-1062FX-MM-SC)

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 8W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 680g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1062FX-MM-SC, Industrial 8-port Unmanaged Ethernet Switch, DIN, 6x 10/100 RJ-45 + 2x 100 MM SC
* For special orders only
Net Price: 363,00 EUR  Unit: pcs  VAT: 23%

#07915

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100 MM SC (ORing IES-162FX-MM-SC-L)

IES-162FX-L series are unmanaged Ethernet switches with 6 x 10/100Base-T(X) and 2 x 100Base-FX ports. With very compact size of housing, you can install IES-162FX-L series easily. In addition, IES-162FX-L series are with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -20°C to 60°C is ready and can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
LED Indicators
Power indicator Green - Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for speed indicator – Amber for 100Mbps,
off-light for 10Mbps
Fiber port indicator Green for port Link/Act
Power
Input power 10~30VDC on 3-pin terminal block.
Power consumption (typical) 3.6W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 83.98mm x 115mm
Weight 328g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -20÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years

#06608

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100 SM SC (ORing IES-1062FX-SS-SC)

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 8W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 680g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1062FX-SS-SC, Industrial 8-port Unmanaged Ethernet Switch, DIN, 6x 10/100 RJ-45 + 2x 100 SM SC
* For special orders only
Net Price: 411,00 EUR  Unit: pcs  VAT: 23%

#07916

Unmanaged switch, 6x 10/100 RJ-45 + 2x 100 SS SC (ORing IES-162FX-SS-SC-L)

IES-162FX-L series are unmanaged Ethernet switches with 6 x 10/100Base-T(X) and 2 x 100Base-FX ports. With very compact size of housing, you can install IES-162FX-L series easily. In addition, IES-162FX-L series are with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -20°C to 60°C is ready and can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Singlemode ports (30km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
LED Indicators
Power indicator Green - Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for speed indicator – Amber for 100Mbps,
off-light for 10Mbps
Fiber port indicator Green for port Link/Act
Power
Input power 10~30VDC on 3-pin terminal block.
Power consumption (typical) 3.6W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 83.98mm x 115mm
Weight 328g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -20÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years

#06599

Unmanaged switch, 6x 10/100 RJ-45 + 2x 1000 MM SC (ORing IES-1062GF-MM-SC)

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
1000Base-SX Multimode ports (550m, 850nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 6W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 685g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1062GF-MM-SC, Industrial 8-port Unmanaged Ethernet Switch, DIN, 6x 10/100 RJ-45 + 2x 1000 MM SC
* For special orders only
Net Price: 476,00 EUR  Unit: pcs  VAT: 23%

#06602

Unmanaged switch, 6x 10/100 RJ-45 + 2x 1000 SM SC (ORing IES-1062GF-SS-SC)

IES-1080/1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base- LX ports. IES-1080/1062 series support redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
1000Base-LX Singlemode ports (10km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 6W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 685g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1062GF-SS-SC, Industrial 8-port Unmanaged Ethernet Switch, DIN, 6x 10/100 RJ-45 + 2x 1000 SM SC
* For special orders only
Net Price: 518,00 EUR  Unit: pcs  VAT: 23%

#06651

Unmanaged switch, 8x 10/100 RJ-45 + 2x 1000 SFP (ORing IES-1082GP)

IES-1082GP is an unmanaged Ethernet switches with 8x10/100Base-T(X) and 2x1000Base-X in SFP ports. IES-1082GP supports redundant power input, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
1000 Mbps SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 8W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 675g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1082GP, Industrial 10-port unmanaged Ethernet switch, DIN, 8x 10/100 RJ-45 + 2x 1000 SFP
* For special orders only
Net Price: 340,00 EUR  Unit: pcs  VAT: 23%

#06653

Unmanaged switch, 8x 10/100 RJ-45, slim housing (ORing IES-1080A)

IES-1050A/1080A is unmanaged Ethernet switches with 5 or 8 x 10/100Base-T(X) ports. IES-1050A/1080A support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 4W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 33mm x 95mm x 144mm
Weight 391g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1080A, Industrial Slim Type Unmanaged Ethernet Switch, DIN, 8x 10/100 RJ-45, slim housing
Net Price: 116,00 EUR  Unit: pcs  VAT: 23%

#07962

Unmanaged switch, 8x 10/100 RJ-45, slim housing (ORing IES-180B)

IES-180B is an unmanaged Ethernet switch with 8x10/100Base-T(X) ports. With very mini size of housing, you can install IES-180B easily. In addition, IES-180B is with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -40 to 70°C is ready and can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 4W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 90mm x 95mm
Weight 205g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-180B, Industrial 8-port mini type unmanaged Ethernet switch, DIN, 8x 10/100 RJ-45, slim housing
* For special orders only
Net Price: 146,00 EUR  Unit: pcs  VAT: 23%

#06612

Unmanaged switch, 8x 10/100 RJ-45, slim housing (ORing IES-C1080)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 43,5mm x 64mm x 103mm
Environmental
Storage Temperature -10÷60°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
Unmanaged switch,  8x 10/100 RJ-45, slim housing (ORing IES-C1080)
Net Price: 84,30 EUR  Unit: pcs  VAT: 23%

#07914

Unmanaged switch, 14x 10/100 RJ-45 + 2x 100 SFP (ORing IES-1142)

IES-1142P is a din-rail unmanaged Ethernet switch with 14x10/100Base-T(X) and 2x100Base-FX in SFP ports. IES-1142P supports redundant power inputs. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 14
100 Mbps SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 4096 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for speed indicator – Amber for 100Mbps,
off-light for 10Mbps
Fiber port indicator Green for port Link/Act
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 10W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74mm x 140mm x 170mm
Weight 1120g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1142, Industrial Unmanaged Switch, DIN, 14x 10/100 RJ-45 + 2x 100 SFP
* For special orders only
Net Price: 486,00 EUR  Unit: pcs  VAT: 23%

#08160

Unmanaged switch, 16x 10/100 RJ-45 (ORing IES-1160)

IES-1160 is the unmanaged Ethernet switch with 16x10/100Base-T(X) port. IES-1160 support redundant power inputs, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments. Especially, IES-1160 features dual different redundant DC power inputs, two DC power inputs are on terminal block to avoid any unexpected fails on power on. Thus, IES-1160 could guarantee a non-stop operation. Therefore, the switch is one of the most reliable choice for highly-unmanaged Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 9W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1060g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1160, Industrial 16-port unmanaged Ethernet switch, DIN, 16x 10/100 RJ-45
* For special orders only
Net Price: 473,00 EUR  Unit: pcs  VAT: 23%

#07637

Unmanaged switch, 16x 10/100 RJ-45 + 2x SFP (ORing IES-1162GC)

IES-1162GC is the unmanaged Ethernet switch with 16x10/100Base-T(X) and 2xgigabit combo ports. IES-1162GC supports redundant power inputs, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments. Especially, IES-1162GC features dual different redundant DC power inputs, two DC power inputs are on terminal block to avoid any unexpected fails on power on. Thus, IES-1162GC could guarantee a non-stop operation. Therefore, the switch is one of the most reliable choice for highly-unmanaged Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
1000 SFP 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 9W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1060g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1162GC, Industrial 18-port unmanaged Ethernet switch, DIN, 16x 10/100 RJ-45 + 2x SFP
* For special orders only
Net Price: 541,00 EUR  Unit: pcs  VAT: 23%

#08161

Unmanaged switch, 24x 10/100 RJ-45 (ORing IES-1240)

IES-1240 is the unmanaged Ethernet switch with 24x10/100Base-T(X) port. IES-1240 support redundant power inputs, relay output alarm, and surge protection. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments. Especially, IES-1240 features dual different redundant DC power inputs, two DC power inputs are on terminal block to avoid any unexpected fails on power on. Thus, IES-1240 could guarantee a non-stop operation. Therefore, the switch is one of the most reliable choice for highly-unmanaged Ethernet application
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
Software Features Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power indicator Green - Power LED x 3
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 9.6W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96mm x 109.2mm x 153.6mm
Weight 1052g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-1240, Industrial 24-port unmanaged Ethernet switch, DIN, 24x 10/100 RJ-45
* For special orders only
Net Price: 611,00 EUR  Unit: pcs  VAT: 23%

 FAST ETHERNET / SMART SWITCHES
#06587

Smart switch, 4x 10/100 RJ-45 + 2x 100 MM SC, O-Ring <10ms (ORing IES-2042FX-MM-SC)

IES-2060/2042FX series are lite-Managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) ports or 4x10/100Base-T(X) and 2x100Base-FX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility - Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, these switch is one of the most reliable choice for easy managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 670g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-2042FX-MM-SC, Industrial 6-port lite-managed Ethernet switch, DIN, 4x 10/100 RJ-45 + 2x 100 MM SC, O-Ring <10ms
* For special orders only
Net Price: 425,00 EUR  Unit: pcs  VAT: 23%

#06588

Smart switch, 4x 10/100 RJ-45 + 2x 100 SM SC, O-Ring <10ms (ORing IES-2042FX-SS-SC)

IES-2060/2042FX series are lite-Managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) ports or 4x10/100Base-T(X) and 2x100Base-FX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, these switch is one of the most reliable choice for easy managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 670g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-2042FX-SS-SC, Industrial 6-port lite-managed Ethernet switch, DIN, 4x 10/100 RJ-45 + 2x 100 SM SC, O-Ring <10ms
Net Price: 457,00 EUR  Unit: pcs  VAT: 23%

#06884

Smart switch, 5x 10/100 M12, O-Ring <10ms, IP67 housing (ORing IES-2050-M12)

IES-2050-M12 is a waterproof lite-managed redundant ring Ethernet switch with 5x10/100Base-T(X) ports which is full compliant with IP-67 standard. With complete support of Ethernet redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technologies. It is specifically designed for the toughest industrial environments. In combination with its IP-67 design and the superb management functionalities. IES-2050-M12 is constructed of a rugged aluminum case and designed with IP-67 rated RJ45 Ethernet ports (M12 type connector), which provide a waterproof, and dust-tight connection. IES-2050-M12 can be managed centralized by a powerful windows utility — Open-Vision. In addition, the wide operating temperature, range from -40 to 70°C, can satisfy most of operating environment. The IES-2050-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, IES-2050-M12 is one of the most reliable choices for industrial networking applications.
Physical Ports
10/100 Base-T(X) Ports w/Auto MDI/MDIX 5
Connector Type Waterproof M12
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power Indicator Green - Power LED x 1,
Indicates power input
Ready Indicator Amber - Ready LED x 1,
Indicates system ready
O-Ring Indicator Amber - Indicates port operating in O-Ring mode (per port)
10/100TX Port Indicator Green for port Link/Act. (per port)
Power
Input power 9÷30VDC
Connector Type Waterproof M12
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-67
Dimension (W x D x H) 90mm x 40.5mm x 155mm
Weight 470g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years

#06583

Smart switch, 5x 10/100 RJ-45, O-Ring <10ms (ORing IES-2050A)

IES-2050A is a lite-managed Ethernet switch. With very compact size of housing, you can install IES-2050A easily. In addition, it also supports of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2050A provide the setting ability of Web-GUI and Windows Utility, also support the simple DIP-Switch setting function which offer great flexibility to set up the Ring. IES-2050A is with rigid IP-30 housing design and can operate under harsh environment. The feature of wide operating temperature range from -40 to 70°C can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching bandwidth 1.0 Gbps
VLAN Port Based
Security Features Enable/disable ports,
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring
LED Indicators
Power / Ready indicator Green - Ready LED
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
10/100TX RJ45 port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power 9÷30 VDC voltage power input
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 88mm x 102mm x 24mm
Weight 308g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-2050A, Industrial 5-port slim type lite-managed Ethernet switch, DIN, 5x 10/100 RJ-45, O-Ring <10ms
Net Price: 218,00 EUR  Unit: pcs  VAT: 23%

 FAST ETHERNET / MANAGED SWITCHES
#08162

Managed switch, 4x 10/100 RJ-45 + 2x100 SFP, O/Open-Ring <10ms (ORing IES-2042PA)

IES-2042PA is a Lite-Managed Redundant Ring Ethernet switch. With very compact size of housing, you can install IES-2042PA easily. In addition, it also supports of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2042PA provides the setting ability of Web-GUI and Windows Utility, also support the simple DIP-Switch setting function which offers great flexibility to set up the Ring. With it's rigid IP-30 housing design, it can operate under harsh environment. The feature of wide operating temperature range from -40 to 70°C can satisfy most requirement of operation.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100 Mbps SFP Ports 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
EEE 802.3ab dla LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 1.2 Gbps
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (port based),
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 7W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 95mm x 144.3mm
Weight 395g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-2042PA, Industrial 6-port slim type lite-managed Ethernet switch, DIN, 4x 10/100 RJ-45 + 2x100 SFP, O/Open-Ring <10ms
Net Price: 241,00 EUR  Unit: pcs  VAT: 23%

#06606

Managed switch, 6x 10/100 RJ-45 + 2x100 MM SC, O/Open-Ring <10ms (ORing IES-3062FX-MM-SC)

IES-3080 / IES-3062 series are managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) and 2x10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. IES-3080 / IES-3062 series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Multimode ports (2km, 1310nm, SC connector) 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 1588 for Precise Time Protocol Client
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 9W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 735g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3062FX-MM-SC, Industrial 8-port managed Ethernet switch, DIN, 6x 10/100 RJ-45 + 2x100 MM SC, O/Open-Ring <10ms
* For special orders only
Net Price: 572,00 EUR  Unit: pcs  VAT: 23%

#06609

Managed switch, 6x 10/100 RJ-45 + 2x100 SM SC, O/Open-Ring <10ms (ORing IES-3062FX-SS-SC)

IES-3080 / IES-3062 series are managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) and 2x10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. IES-3080 / IES-3062 series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
100Base-FX Singlemode ports (30km, 1550nm, SC connector) 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 1588 for Precise Time Protocol Client
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 9W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 735g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3062FX-SS-SC, Industrial 8-port managed Ethernet switch, DIN, 6x 10/100 RJ-45 + 2x100 SM SC, O/Open-Ring <10ms
* For special orders only
Net Price: 622,00 EUR  Unit: pcs  VAT: 23%

#07636

Managed switch, 7x 10/100 RJ-45 + 3 slide-in SFP slots / RJ-45, O/Open-Ring <10ms (ORing IES-3073GC)

IES-3073GC is managed Redundant Ring Ethernet switch with 7x10/100Base-T(X) ports and 3xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3073GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. IES-3073GC support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electrical voltage, current and temperature. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 7
1000 COMBO with SFP 3
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1100g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3073GC, Industrial 10-port managed Ethernet switch, DIN, 7x 10/100 RJ-45 + 3 slide-in SFP slots / RJ-45, O/Open-Ring <10ms
Net Price: 741,00 EUR  Unit: pcs  VAT: 23%

#07902

Managed switch, 7x 10/100 RJ-45 + 3 slide-in SFP slots / RJ-45, O/Open-Ring <10ms (ORing IES-P3073GC-HV)

IES-P3073GC series are IEC 61850-3 managed Redundant Ring Ethernet switch with 7x10/100Base-T(X) and 3xGigabit combo ports. These switches are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. And these switches designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain, MRP and MSTP/RSTP:2004/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. O-Chain is the revolutionary network redundancy technology that provides the addon network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain provided ease-of-use while maximizing fault-recovery swiftness,
flexibility, compatibility, and cost-effectiveness in one set of network redundancy topology. All function of IES-P3073GC series can be managed centralized and convenient by a powerful windows utility — Open-Vision. IES-P3073GC series support new DDM (Digital Diagnostic Monitoring) function, which can monitor instantly the status of electrical voltage, current and temperature. In addition, the wide operating temperature range from -40 to 85°C can satisfy most of operating environment. Therefore, these switches are one of the most reliable choices for highly-managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 7
1000 COMBO with SFP 3
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual power inputs. 85~264VAC/88~373VDC on dual 3-pin terminal block,
IES-P3073GC-LV version with dual 12/48VDC power inputs on 2-pin terminal block
Power consumption (typical) 12W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 145.5mm x 154mm
Weight 1935g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Power Automation IEC 61850-3,
IEEE 1613
Warranty
Warranty period 5 years
IES-P3073GC-LV - version with dual 12/48VDC power inputs
ORING NETWORKING
IES-P3073GC-HV, Industrial Managed Switch, DIN, 7x 10/100 RJ-45 + 3 slide-in SFP slots / RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 1 040,00 EUR  Unit: pcs  VAT: 23%

#06598

Managed switch, 8x 10/100 RJ-45 + 2x1000 SFP, O/Open-Ring <10ms (ORing IES-3082GP)

IES-3082GP is managed Redundant Ring Ethernet switch with 8x10/100Base-T(X) and 2x100/1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-3082GP can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
1000 Mbps SFP Ports 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fiber port indicator Green for port Link/Act,
Yellow for Link
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 9W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 730g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3082GP, Industrial 10-port managed Ethernet switch, DIN, 8x 10/100 RJ-45 + 2x1000 SFP, O/Open-Ring <10ms
Net Price: 571,00 EUR  Unit: pcs  VAT: 23%

#06593

Managed switch, 8x 10/100 RJ-45, O/Open-Ring <10ms (ORing IES-3080)

IES-3080 / IES-3062 series are managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) and 2x10/100Base-T(X), 100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology is also supported which can applied for other vendor's proprietary ring. IES-3080 / IES-3062 series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 1588 for Precise Time Protocol Client
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 5.6 Gbps
Max. Number of Available VLANs 4096
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Flashing to indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Yellow - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
Power consumption (typical) 5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52mm x 106mm x 144mm
Weight 710g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3080, Industrial 8-port Managed Ethernet Switch, DIN, 8x 10/100 RJ-45, O/Open-Ring <10ms
Net Price: 460,00 EUR  Unit: pcs  VAT: 23%

#06990

Managed switch, 16x 10/100 RJ-45 + 2 slide-in SFP slots / RJ-45, O/Open-Ring <10ms (ORing IES-3162GC)

IES-3162GC is the managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) ports and 2xgigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3162GC can be managed centralized and convenient by a powerful windows utility - Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1100g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3162GC, Industrial 18-port managed Ethernet switch, DIN, 16x 10/100 RJ-45 + 2 slide-in SFP slots / RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 843,00 EUR  Unit: pcs  VAT: 23%

#07635

Managed switch, 16x 10/100 RJ-45, O/Open-Ring <10ms (ORing IES-3160)

IES-3160 is an managed Redundant Ring Ethernet switch with 16x10/100Base-T(X) ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3160 can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1100g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3160, Industrial 16-port managed Ethernet switch, DIN, 16x 10/100 RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 775,00 EUR  Unit: pcs  VAT: 23%

#07634

Managed switch, 16x 10/100 RJ-45, O/Open-Ring <10ms (ORing IES-3240)

IES-3240 is an managed Redundant Ring Ethernet switch with 24x10/100Base-T(X) ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3240 can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Ethernet application.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1100g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IES-3240, Industrial 24-port managed Ethernet switch, DIN, 16x 10/100 RJ-45, O/Open-Ring <10ms
* For special orders only
Net Price: 900,00 EUR  Unit: pcs  VAT: 23%

#06516

Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <10ms (ORing RES-9242GC-EU)

RES-9242GC is rack mount managed redundant ring Ethernet switch with 24x10/100Base-T(X) ports and 2xgigabit combo ports, SFP socket. RES-9242GC also support Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) /Open-Ring/O-Chain/>*noteMRP/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RES-9242GC supported wide operating temperature from -40°C to 75°C. RES-9242GC can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100Base-T(X) RJ45 Ports 24
10/100/1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 8.8 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units ,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client ,
DHCP Relay,
Modbus TCP,
SMTP Client,
NTP server
Network Redundancy O-Ring,
Open-Ring,
O-ChainMRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power / Ready indicator Green - Ready LED x 2
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
10/100TX RJ45 port indicator Green for port Link/Act,
Green for speed indicator ~ On for 100Mbps / Off for 10Mbps
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Green for speed indicator ~ On for 100/1000Mbps / Off for 10Mbps
Fiber port indicator Green for port Link/Act
Power
Input power 100~240VAC with power cord
Power consumption (typical) 15.2W
Overload current protection present
Physical Characteristic
Dimension (W x D x H) 440 x 200 x 44 mm (17.32 x 7.87 x 1.73 inch)
Weight 2695g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class B
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1 (compliant,
certification pending)
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RES-9242GC-EU, Industrial Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <10ms
* For special orders only
Net Price: 686,00 EUR  Unit: pcs  VAT: 23%

#06625

Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <30ms (ORing RES-P9242GCL-HV)

RES-P9242GCL series are 26-port rack mount managed redundant ring Ethernet switch with 24x10/100Base-T(X) and 2xGigabit Combo ports, SFP socket. These switches are designed for power substation application, and it is fully compliant with the requirement of IEC 61850-3 and IEEE 1613. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms), O-Chain, MRP*note, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RES-P9242GCL series can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100Base-T(X) RJ45 Ports 24
10/100/1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 8.8 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units ,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client ,
DHCP Relay,
Modbus TCP,
SMTP Client,
NTP server
Network Redundancy O-Ring,
O-ChainMRP,
MSTP (RSTP/STP compatible)
LED Indicators
Power / Ready indicator Green - Ready LED x 2
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
10/100TX RJ45 port indicator Green for port Link/Act,
Green for speed indicator ~ On for 100Mbps / Off for 10Mbps
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Green for speed indicator ~ On for 100/1000Mbps / Off for 10Mbps
Fiber port indicator Green for port Link/Act
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual 125~370VDC / 100~240VAC power inputs
Power consumption (typical) 19.8W
Overload current protection present
Physical Characteristic
Dimension (W x D x H) 443.7 x 262.7 x 44 mm
Weight 4050g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷85°C (-40÷185°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B,
IEC 61850/ IEEE1613
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Other IEC 61850/ IEEE1613
MTBF 262,968 hrs
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RES-P9242GCL-HV, Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <30ms
* For special orders only
Net Price: 1 370,00 EUR  Unit: pcs  VAT: 23%

 GIGABIT ETHERNET / UNMANAGED SWITCHES
#06879

Unmanaged switch, 4x 10/1000 RJ-45 + 1x 1000 SFP , slim housing (ORing IGS-1041GPA)

IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
1000Base-X SFP Ports 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Green and Amber on for 100Mbit,
Amber on only for 10Mbit
1000X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 5.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 403g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-1041GPA, Industrial Slim Type 5-Port Unmanaged Gigabit Ethernet Switch, DIN, 4x 10/1000 RJ-45 + 1x 1000 SFP
* For special orders only
Net Price: 204,00 EUR  Unit: pcs  VAT: 23%

#07960

Unmanaged switch, 4x 10/1000 RJ-45 + 2x 1000 SFP, slim housing (ORing IGS-1042GPA)

IGS-1042GPA is an unmanaged Ethernet switch. IGS-1042GPA has 4x10/100/1000Base-T(X) and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGS-1042GPA supports wide range 12~48VDC power inputs. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Green and Amber on for 100Mbit,
Amber on only for 10Mbit
1000X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 6.4W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 410g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-1042GPA, Industrial 6-port slim type unmanaged Gigabit Ethernet switch, DIN, 4x 10/1000 RJ-45 + 2x 1000 SFP
* For special orders only
Net Price: 227,00 EUR  Unit: pcs  VAT: 23%

#06613

Unmanaged switch, 5x 10/100/1000 RJ-45, slim housing (ORing IGS-C1050)

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Yellow - Indicate PWR1 or PWR2 failure
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26mm x 64mm x 103mm
Environmental
Storage Temperature -10÷60°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
Unmanaged switch,  5x 10/100/1000 RJ-45, slim housing (ORing IGS-C1050)
* For special orders only
Net Price: 104,00 EUR  Unit: pcs  VAT: 23%

#06878

Unmanaged switch, 5x 10/1000 RJ-45, slim housing (ORing IGS-1050A)

IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Green and Amber on for 100Mbit,
Amber on only for 10Mbit
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 5.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9mm x 144.3mm
Weight 420g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-1050A, Industrial Slim Type 5-Port Unmanaged Gigabit Ethernet Switch, DIN, 5x 10/1000 RJ-45
* For special orders only
Net Price: 182,00 EUR  Unit: pcs  VAT: 23%

#07959

Unmanaged switch, 5x 10/1000 RJ-45, slim housing (ORing IGS-150B)

IGS-150B is a mini type unmanaged full gigabit Ethernet switch with 5 x 10/100/1000Base-T(X) ports. IGS-150B supports redundant power input and rigid mini size IP-30 housing. In addition, the wide operating temperature range from -40oC to 70oC can satisfy most of operating environment.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.3ab for 1000Base-T
MAC Table 4096 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
10/100T/1000X RJ45 port indicator Up Green LED for Link/Act indicator,
Down dual color LED for speed indicator Green - 1000Mbps,
Amber - 100Mbps,
Off - 10Mbps
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3.2W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 70mm x 95mm
Weight 222g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-150B, Industrial 5-port mini type unmanaged Gigabit Ethernet switch, DIN, 5x 10/1000 RJ-45
* For special orders only
Net Price: 130,00 EUR  Unit: pcs  VAT: 23%

#06513

Unmanaged switch, 3x 10/100/1000 RJ-45, Gigabit Ethernet, 1x 100/1000Base-X SFP, PCIe slot (ORing IGCS-E131GP)

IGCS-E131GP is a PCI-Express unmanaged Gigabit Ethernet switch card. IGCS-E131GP is a high performance LAN controller which provides 3x10/100/1000Base-T(X) auto MDI/MDIX Ethernet ports and 1x100/1000Base-X SFP ports. IGCS-E131GP could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communicate with other Ethernet devices. The IGCS-E131GP's full bandwidth capability boasts a robust 1000Mbps capability through the PCI Express bus architecture. IGCS-E131GP no need to purchase a new switch or broadband router because the autonegotiation feature works with your existing switch, broadband router, or hub to provide the highest network speed available. The automatic full duplex
capability further increases bandwidth and eliminates packet collisions by allowing data to flow in both directions at the same time. Therefore, IGCS-E131GP is the best solution to IPC/embedded system to feature Ethernet network.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 3
100/1000Base-X SFP port 1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.z for 1000Base-X
MAC Table 8192 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act.
100/1000Base-X SFP port indicator Green for port Link/Act.
Power
Input power PCIe bus powered
Power consumption (typical) 4,2W
Overload current protection present
Physical Characteristic
Dimension (WxDxH) 21.3mm x 178mm x 121mm
Weight 120g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (14÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Operating System Supports
Microsoft System DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8
Unix (Linux) Linux for Kernel 3.x / 2.6.x / 2.4.x,
FreeBSD for 7.x / 8.0,
SCO OpenServer for 6 / UnixWare 7.1.x
Novell Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x)
Others MacOS 10.4 / 10.5 / 10.6 / 10.7
Warranty
Warranty period 5 years

#08431

Unmanaged switch, 4x 10/100/1000 RJ-45, Gigabit Ethernet, PCIe slot (ORing IGCS-E140)

IGCS-E140 is an PCI-Express unmanaged Gigabit Ethernet switch card. The Ethernet switch card is a high performance LAN controller. IGCS-E140 provided 4x10/100/1000Base-T(X) auto MDI/MDIX Ethernet ports. IGCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. The IGCS-E140's full bandwidth capability boasts a robust 1000Mbps capability through the PCI-Express bus architecture. IGCS-E140 no need to purchase a new switch or broadband router because the auto-negotiation feature works with your existing switch, broadband router, or hub to provide the highest network speed available. The automatic full duplex capability further increases bandwidth and eliminates packet collisions by allowing data to flow in both directions at the same time. Therefore, IGCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control
MAC Table 8192 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act. Amber for Collision/Duplex indicator
Power
Input power PCIe bus powered
Power consumption (typical) 4,2W
Overload current protection present
Physical Characteristic
Dimension (WxDxH) 21.3mm x 136mm x 121mm
Weight 98g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (14÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Operating System Supports
Microsoft System DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8
Unix (Linux) Linux for Kernel 3.x / 2.6.x / 2.4.x,
FreeBSD for 7.x / 8.0,
SCO OpenServer for 6 / UnixWare 7.1.x
Novell Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x)
Others MacOS 10.4 / 10.5 / 10.6 / 10.7
Warranty
Warranty period 5 years

#07666

Unmanaged switch, 4x 10/1000 RJ-45 + 2x 1000 SFP (Wave Optics WO-IS-2GF4GC)

WO-IS-2GF4GC is an industrial Ethernet switch with extended temperature ranges developed by Wave Optics to fulfill needs in industries including
smart traffic, expressways, smart cities, safe cities, new energy, smart manufacturing, and so on. The two Gigabit fiber port and four Gigabit copper ports provide a high packet forwarding rate and an ample back plane bandwidth, making the transmission of images clear and smooth.
Having an IP40 rated aluminum enclosure, a rail base designed to withstand severe vibration, and good EMC electromagnetic compatibility, this series of product is capable of working stably and reliably in extreme-temperature (-40°C to 85°C) and rugged industrial environments.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3z for 1000Base-X
MAC Table 2048 MAC addresses
Power
Input power Dual DC inputs. 9÷48VDC on 5-pin terminal block
Power consumption (typical) 6W
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 37mm x 85m x 116mm
Weight 430g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷85°C (-40÷185°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMS IEC61000-4-2(ESD) level 4,
IEC 61000-4-4 (EFT) level 4,
IEC61000-4-5(Surge) level 4
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF 500000h
WAVE OPTICS
Unmanaged switch, 4x 10/1000 RJ-45 + 2x 1000 SFP (Wave Optics WO-IS-2GF4GC)
Net Price: 79,70 EUR  Unit: pcs  VAT: 23%

#06614
NEW

Unmanaged switch, 8x 10/100/1000 RJ-45 (ORing IGS-C1080)

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control
MAC Table 4k MAC addresses
Processing Store-and-Forward
Power
Input power 12÷48VDC on 2-pin terminal block
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 43,5mm x 64mm x 103mm
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55032,
EN 55035),
FCC Part 15 B
EMI CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000- 4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8(PFMF)
Safety EN62368-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGS-C1080, Unmanaged switch, 8x 10/100/1000 RJ-45
* For special orders only
Net Price: 136,00 EUR  Unit: pcs  VAT: 23%

#06615

Unmanaged switch, 8x 10/1000 RJ-45 + 2x 1000 SFP (ORing IGS-182GP)

IGS-182GP is unmanaged Ethernet switch with 8x10/100/1000Base-T(X) with 2x100/1000Base-X ports. With very compact size of housing, you can install IGS-182GP easily. In addition, IGS-182GP is with rigid IP-30 housing design and can operate under harsh environment. The extended operating temperature range from -40 °C to 75°C is ready and can satisfy most requirement of operation.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000Base-X SFP Ports 2
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
IEEE 802.3z for 1000Base-X,
IEEE 802.3x for Flow control
MAC Table 8k
Processing Store-and-Forward
Switch Properties Switching latency 7 us,
Switching bandwidth 20Gbps
Jumbo frame 9216 Bytes
Packet buffer 1.5Mbit
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate power failed even warning
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Amber on for 100Mbit,
off for 10Mbit
1000X SFP port Indicator Green for port Link/Act,
Green for 1000Mbps,
Amber for 100Mbps
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) <5W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41(W) x 89.8(D) x 127(H) mm
Weight 400g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷75°C (-40÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD Contact 6KV,
Air 8KV),
IEC/EN 61000-4-3 (RS 3V),
IEC/EN 61000-4-4 (EFT Power 2KV,
Signal 2KV),
IEC/EN 61000-4-5 (Surge Power 1KV,
RJ45 1KV),
IEC/EN 61000-4-6 (CS 3V),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety UL61010-1,
UL61010-2-201
MTBF 1056,516 hours
Warranty
Warranty period 5 years
ORING NETWORKING
Unmanaged switch, 8x 10/1000 RJ-45 + 2x 1000 SFP (ORing IGS-182GP)
Net Price: 370,00 EUR  Unit: pcs  VAT: 23%

#08156

Unmanaged switch, 8x 10/1000 RJ-45, slim housing (ORing IGS-1080A)

IGS-1080A is the slim type unmanaged gigabit Ethernet switch with 8 x 10/100/1000Base-T(X) ports. IGS-1080A supports redundant power input, rigid IP-30 housing, plus DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control
MAC Table 2048 MAC addresses
Processing Store-and-Forward
LED Indicators
Power indicator Green - Power LED x 2
Fault indicator Amber - Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator Green on only for 1000Mbit,
Green and Amber on for 100Mbit,
Amber on only for 10Mbit
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 5.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
Weight 420g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-1080A, Industrial 8-port slim type unmanaged Gigabit Ethernet switch, DIN, 8x 10/1000 RJ-45
Net Price: 190,00 EUR  Unit: pcs  VAT: 23%

 GIGABIT ETHERNET / MANAGED SWITCHES
#07951

Managed modular switch, 16x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, (ORing RGS-P9160GC-M1-HV)

RGS-P9160M1 series have three different models, RGS-P9160GCM1, RGS-P9160GFM1 and RGS-P9160FXM1. They are IEC 61850-3 and up to 24-port modular rack mount Gigabit managed redundant ring Ethernet switch with 16xGigabit combo / Gigabit fiber / 100Mbit fiber ports and provided 1 modular switch slot to extend switch function. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. RGS-P9160M1 series support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms), O-Chain, *note MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-P9160M1 series can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation application.
Physical Ports
Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port 16
Slot Number 1 slot for 4x10G port
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Packet Buffer 32Mbits
Flash Memory 128Mbits
DRAM Size 1Gbits
Jumbo frame Up to 10K Bytes
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 48 Gbps
Max. Number of Available VLANs 4095
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
Supervisor Login Indicator (RMT) Green - System is accessed remotely
Smart LED Display system Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button,
Port 1 ~ 28 Link/Act(LK/ACT) LED show - Green x 28
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual 100~240VAC / 100~370VDC power inputs at terminal block
Overload current protection present
Reverse Polarity Protection Present
Physical Characteristic
Dimension (W x D x H) 440mm x 325mm x 44mm
Weight 4823g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature 10G SFP+ module absent -40 to 70°C (-40 to 158°F ),
10G SFP+ module used -20 to 60 °C (-4 to 140°F )
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
Power Automation IEC 61850-3,
IEEE 1613 (pending)
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 5 years
Modules:
#08898 8x1G module, RJ-45 (ORing SWM-80GT)
#08897 8x1G module, SFP (ORing SWM-08GP)
#07950 4x10G module, SFP (ORing SWM-04GP+_4)
ORING NETWORKING
ORing RGS-P9160GC-M1-HV, Managed modular switch, 16x 1G, 4 slide-in SFP+ slots 10G
* For special orders only
Net Price: 2 600,00 EUR  Unit: pcs  VAT: 23%

#08899

Managed modular switch, 24x SFP + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)

RGS-9000 is modular managed redundant ring Ethernet switch with 4 slots. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 85 oC (If use 10G SFP module then operating temperature is -20 oC ~ 60 oC). RGS-9000 can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
Slot Number 4 (up to 3 slots for 8x1G port and 1 slot for 4x10G port)
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
Max. Number of Available VLANs 256
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible)
LED Indicators
Power Indicator (PWR) Green Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Fault indicator Amber - Indicates unexpected event occurred
Supervisor Login Indicator (RMT) Green - System is accessed remotely
Smart LED Display system Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
Mode select Button (MODE) Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button,
Port 1 ~ 28 Link/Act(LK/ACT) LED show - Green x 28
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual 88~264VAC / 100~370VDC power inputs at terminal block
Power consumption (typical) 43.5W
Overload current protection present
Physical Characteristic
Dimension (W x D x H) 440mm x 325mm x 44mm
Weight 6600g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature 10G SFP+ module absent -40 to 70°C (-40 to 158°F ),
10G SFP+ module used -20 to 60 °C (-4 to 140°F )
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
Warranty period 5 years
Modules:
#08898 8x1G module, RJ-45 (ORing SWM-80GT)
#08897 8x1G module, SFP (ORing SWM-08GP)
ORING NETWORKING
ORing RGS-P9000-HV, Industrial Managed modular switch, 24x SFP + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms
* For special orders only
Net Price: 1 680,00 EUR  Unit: pcs  VAT: 23%

#08158

Managed switch, 3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-3032GC)

IGS-3032GC is a full gigabit managed Redundant Ring Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
IGS-3032GC can be managed centralized and convenient by a powerful windows utility - Open-Vision.
The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 3
1000 Mbps SFP Ports 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 10 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 256
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring,
Open-Ring,
O-RSTP
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
1000X / Fiber port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Triple DC inputs +12 ~ +48VDC or -12 ~ -48VDC on 7-pin terminal block,
12 ~ 45VDC on power jack
Power consumption (typical) 10W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.1mm x 106.1mm x 145.4mm
Weight 1022g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-3032GC, Industrial 5-port managed Gigabit Ethernet switch, DIN, 3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms
* For special orders only
Net Price: 595,00 EUR  Unit: pcs  VAT: 23%

#07901

Managed switch, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-P9812GP-HV)

IGS-P9812GP is IEC 61850-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. And the switch designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-P9812GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000Base-X SFP Port 12
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring,
Open-Ring,
O-RSTP
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
1000X / Fiber port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input power Dual power inputs. 85~264VAC/88~373VDC on 6-pin terminal block,
IGS-P9812GP-LV - version with dual 12/48VDC power inputs on 6-pin terminal block
Power consumption (typical) 24W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 115mm x 159mm x 154mm
Weight 1870g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Power Automation IEC 61850-3,
IEEE 1613
Warranty
Warranty period 5 years
IGS-P9812GP-LV - version with dual 12/48VDC power inputs
ORING NETWORKING
IGS-P9812GP-HV, Industrial Managed Switch, DIN, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <20ms
* For special orders only
Net Price: 1 410,00 EUR  Unit: pcs  VAT: 23%

#07655

Managed switch, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9812GP)

IGS-9812GP is managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 70 oC. IGS-9812GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000 Mbps SFP Ports 12
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 2
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 10W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 105.5mm x 154mm
Weight 1210g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-9812GP, Industrial 20-port managed Gigabit Ethernet switch, DIN, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <30ms
* For special orders only
Net Price: 1 160,00 EUR  Unit: pcs  VAT: 23%

#06511

Managed switch, 8x 10/1000 RJ-45 + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGS-9084GP-LA)

IGS-9084GP-LA is slim type managed Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 °C to 75 °C. IGS-9084GP-LA can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000 SFP 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 24 Gbps
Throughput (packet per second) 17.856Mpps@64Bytes
Max. Number of Available VLANs 256
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCP
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)
LED Indicators
Ring Master indicator Green - indicates system operated in O-Ring Master mode
Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicates unexpected event occurred
100/1000Base-X SFP Port Indicator Green for port Link/Act.
10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12~48VDC on 6-pin terminal block
Power consumption (typical) 13Watts (power device not included)
Hi-POT 1.5KV AC
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 54.3 (W) x 108.3 (D) x 145.1 (H) mm (2.13 x 4.26 x 5.71 inches)
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
MTBF 516416hrs
Warranty
Warranty period 5 years
ORING NETWORKING
Managed switch,  8x 10/1000 RJ-45 + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGS-9084GP-LA)
Net Price: 659,00 EUR  Unit: pcs  VAT: 23%

#07909

Managed switch, 8x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9084GP)

IGS-9084GP is managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports. The switch is designed for Railway application and fully compliant with the requirement of EN50155/EN50121-4 standard. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. In addition, with its rugged design for railway certification, i.e., EN50155/EN50121-4 standard, make IGS-9084GP to be solid and reliable for railway traffic communication and transportation application. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000 Mbps SFP Ports 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 24 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12.5W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 1070g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS IEC61000-4-2 (ESD),
IEC61000-4-3 (RS),
IEC61000-4-4 (EFT),
IEC61000-4-5 (Surge),
IEC61000-4-6 (CS),
IEC61000-4-8,
IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
IGS-9084GP-FB2-MM - version with bypass MM
IGS-9084GP-FB2-SS - version with bypass SS
ORING NETWORKING
IGS-9084GP, Industrial Managed Switch, DIN, 8x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <30ms
* For special orders only
Net Price: 1 100,00 EUR  Unit: pcs  VAT: 23%

#07912

Managed switch, 12x 10/1000 RJ-45 + 2x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9042GP)

ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock and vehicle applications. IGS-9122GP is managed redundant ring Ethernet switch with 12x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-9122GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 12
100/1000 Mbps SFP Ports 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 28 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 12.67W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
Weight 765g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS IEC61000-4-2 (ESD),
IEC61000-4-3 (RS),
IEC61000-4-4 (EFT),
IEC61000-4-5 (Surge),
IEC61000-4-6 (CS),
IEC61000-4-8,
IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-9042GP, Industrial Managed Switch, DIN, 12x 10/1000 RJ-45 + 2x100/1000 SFP w/DDM, O/Open-Ring <30ms
* For special orders only
Net Price: 1 110,00 EUR  Unit: pcs  VAT: 23%

#06515

Managed switch, 16x 10/100/1000 COMBO Ports with SFP + 8 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-9168GCP-E-EU)

RGS-9168GCP series are Gigabit managed redundant ring Ethernet switch with 16xGigabit combo ports and 8x100/1000Base-X, SFP socket. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And RGS-9168GCP series support wide operating temperature from -40 oC to 75 oC. RGS-9168GCP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 16
100/1000Base-X with SFP ports 8
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
8,
N,
1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
Guest VLAN,
MAC address limit,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging ,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client,
DHCP Relay,
Modbus TCP,
SMTP Client,
NTP server
Network Redundancy O-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible)
LED Indicators
Power Indicator Green LED x 3 Power indicator for AC and DC
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power 100~240VAC with power cord,
and dual 48VDC(36~72VDC) power inputs at 6-pin terminal block
Power consumption (typical) 28.2W
Overload current protection Present with terminal block
Reverse Polarity Protection Present
Physical Characteristic
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 4437g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40 to 75 °C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RGS-9168GCP-E-EU, Industrial Managed switch, 16x 10/100/1000 COMBO Ports with SFP + 8 slide-in SFP slots, O/Open-Ring <30ms
* For special orders only
Net Price: 2 030,00 EUR  Unit: pcs  VAT: 23%

#06514

Managed switch, 16x 10/100/1000 COMBO Ports with SFP + 8 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-9168GCP-EU)

RGS-9168GCP series are Gigabit managed redundant ring Ethernet switch with 16xGigabit combo ports and 8x100/1000Base-X, SFP socket. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And RGS-9168GCP series support wide operating temperature from -40 oC to 75 oC. RGS-9168GCP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 16
100/1000Base-X with SFP ports 8
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
8,
N,
1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
Guest VLAN,
MAC address limit,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging ,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client,
DHCP Relay,
Modbus TCP,
SMTP Client,
NTP server
Network Redundancy O-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible)
LED Indicators
Power Indicator Green LED x 3 Power indicator for AC and DC
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power 100~240VAC with power socket
Power consumption (typical) 28.2W
Overload current protection not present
Reverse Polarity Protection Present
Physical Characteristic
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 4117g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40 to 75 °C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RGS-9168GCP-EU, Industrial Managed switch, 16x 10/100/1000 COMBO Ports with SFP + 8 slide-in SFP slots, O/Open-Ring <30ms
* For special orders only
Net Price: 1 660,00 EUR  Unit: pcs  VAT: 23%

#07900

Managed switch, 16x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-P9164GC-HV)

IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring,
Open-Ring,
O-RSTP
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicate unexpected event occurred
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for Duplex/Collision
1000X / Fiber port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input power Dual power inputs. 85~264VAC/88~373VDC on 3-pin terminal block,
IGS-P9164GC-LV version with dual 12/48VDC power inputs on 2-pin terminal block
Power consumption (typical) 18W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 115mm x 159mm x 154mm
Weight 2186g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Power Automation IEC 61850-3,
IEEE 1613
Warranty
Warranty period 5 years
IGS-P9164GC-LV - version with dual 12/48VDC power inputs
ORING NETWORKING
IGS-P9164GC-HV, Industrial Managed Switch, DIN, 16x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <20ms
* For special orders only
Net Price: 1 320,00 EUR  Unit: pcs  VAT: 23%

#07905

Managed switch, 16x 10/1000 RJ-45 + 4x1000 MM SC, O/Open-Ring <30ms (ORing IGS-9164GF-MM-SC)

IGS-9164GF/FX series are managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4-port fixed optical fiber port. IGS-9164GF provided 4x1000Base-X fiber ports and IGS-9164FX provided 4x100Base-FX fiber ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) /Open-Ring/O-Chain/MRP/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75°C. IGS-9164GF/FX series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
1000Base-SX Multimode ports (550m, 850nm, SC connector) 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 16.32W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 105.5mm x 154mm
Weight 1243g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-9164GF-MM-SC, Industrial Managed Switch, DIN, 16x 10/1000 RJ-45 + 4x1000 MM SC, O/Open-Ring <30ms
* For special orders only
Net Price: 1 610,00 EUR  Unit: pcs  VAT: 23%

#07906

Managed switch, 16x 10/1000 RJ-45 + 4x1000 SS SC, O/Open-Ring <30ms (ORing IGS-9164GF-SS-SC)

IGS-9164GF/FX series are managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4-port fixed optical fiber port. IGS-9164GF provided 4x1000Base-X fiber ports and IGS-9164FX provided 4x100Base-FX fiber ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) /Open-Ring/O-Chain/MRP/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75°C. IGS-9164GF/FX series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
1000Base-SX Singlemode ports (10km, 1310nm, SC connector) 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 16.32W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 105.5mm x 154mm
Weight 1243g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-9164GF-SS-SC, Industrial Managed Switch, DIN, 16x 10/1000 RJ-45 + 4x1000 SS SC, O/Open-Ring <30ms
* For special orders only
Net Price: 1 710,00 EUR  Unit: pcs  VAT: 23%

#07904

Managed switch, 16x 10/1000 RJ-45 + 8x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9168GP)

IGS-9168GP is managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 8x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 75°C. IGS-9168GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
100/1000 Mbps SFP Ports 8
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 48 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 2
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 20W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 105.5mm x 154mm
Weight 1265g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-9168GP, Industrial Managed Switch, DIN, 16x 10/1000 RJ-45 + 8x100/1000 SFP w/DDM, O/Open-Ring <30ms
* For special orders only
Net Price: 1 280,00 EUR  Unit: pcs  VAT: 23%

#06627

Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP)

RGS-92222GCP-NP series are Gigabit managed redundant ring Ethernet switch with 22x10/100/1000Base-T(X) copper ports and 2xGigabit combo ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 22
Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 2
100/1000Base-X with SFP ports 2
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
8,
N,
1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 52 Gbps
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible),
Fast Recovery
LED Indicators
Power Indicator Green LED Power indicator
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
Power
Input power 100~240VAC with power cord
Power consumption (typical) 22W
Overload current protection present
Reverse Polarity Protection not present
Physical Characteristic
Dimension (W x D x H) 443.7mm x 200mm x 44mm
Weight 2850 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40 to 75 °C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RGS-92222GCP-NP, Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms
* For special orders only
Net Price: 1 200,00 EUR  Unit: pcs  VAT: 23%

#07919

Managed switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms (ORing RGS-92222GCP-NP-E)

RGS-92222GCP-NP series are Gigabit managed redundant ring Ethernet switch with 22x10/100/1000Base-T(X) copper ports and 2xGigabit combo ports and 2x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), Open-Ring, O-Chain, MRP, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-92222GCP-NP series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 22
Gigabit Combo port with 10/100/1000Base-T(X) and 100/1000Base-X SFP ports 2
100/1000Base-X with SFP ports 2
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
8,
N,
1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 52 Gbps
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible),
Fast Recovery
LED Indicators
Power Indicator Green LED x 3 Power indicator for AC and DC
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power 100~240VAC with power cord,
and dual 48VDC(36~72VDC) power inputs at 6-pin terminal block
Power consumption (typical) 23W
Overload current protection present
Reverse Polarity Protection Present on DC only
Physical Characteristic
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 4360g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40 to 75 °C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
Warranty period 5 years
ORING NETWORKING
RGS-92222GCP-NP-E, Industrial Managed Switch, 22x 10/1000 RJ-45 + 2x 10/100/1000 COMBO Ports with SFP + 2 slide-in SFP slots, O/Open-Ring <30ms
* For special orders only
Net Price: 1 580,00 EUR  Unit: pcs  VAT: 23%

#06628

Managed switch, 24x 10/1000 RJ-45 + 4 slide-in SFP slots, O-Ring <30ms (ORing RGS-9244GP)

RGS-9244GP series are Gigabit managed redundant ring Ethernet switch with 24x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And RGS-9244GP series support wide operating temperature from -40 oC to 75 oC. RGS-9244GP series can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
100/1000Base-X with SFP ports 4
RS-232 Serial Console Port RS-232 in DB-9 connector with console cable. 115200bps,
8,
N,
1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 56 Gbps
IGMP multicast groups 256 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible),
Fast Recovery
LED Indicators
Power Indicator Green LED Power indicator
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
100/1000Base-X SFP+ Port Indicator Green for port Link/Act.
Power
Input power 100~240VAC with power cord
Power consumption (typical) 30W
Overload current protection present
Reverse Polarity Protection not present
Physical Characteristic
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 4210 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40 to 75 °C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 395,736 hrs
Warranty
Warranty period 5 years
ORING NETWORKING
ORing RGS-9244GP, Managed switch, 24x 10/1000 RJ-45 + 4 slide-in SFP slots, O-Ring <30ms
* For special orders only
Net Price: 1 460,00 EUR  Unit: pcs  VAT: 23%

#07631
SELL OUT

Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <10ms (ORing RES-3242GC-EU)

RES-3242GC series is 26-port rack-mount managed Redundant Ring Ethernet switch with 24x10/100Base-T(X) and 2xGigabit Combo ports, SFP socket. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RES-3242GC series can be managed centralized and convenient by a powerful windows utility — Open-Vision. RES-3242GC series also supports functions of network management, such as SNMP, RMON, Port Trunking, and Port/Tag-based VLAN security. RES-3242GC-E model support one full-range AC and dual DC power inputs from +12~48 VDC or -12~-48 VDC, and support extend operating temperature from -40 to 70°C. One additional relay output is provided for system alarm warning, Therefore, RES-3242GC series is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100Base-T(X) RJ45 Ports 24
10/100/1000 COMBO with SFP 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1X for Authentication,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 7.2 Gbps
Max. Number of Available VLANs 4096
IGMP multicast groups 1024
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy STP,
RSTP,
O-Ring,
Open-Ring,
O-RSTP
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - indicates system operated in O-Ring Master mode
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for Duplex/Collision
10/100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for 100Mbps
Fiber port indicator Green for port Link/Act
Power
Input power 100~240VAC with power cord
Power consumption (typical) 33W
Overload current protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 4350g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -10÷60°C (14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
RES-3242GC-EU, Industrial Managed Switch, 24x 10/100 RJ45 Ports + 2x 1G COMBO with SFP, O/Open-Ring <10ms
Net Price: 180,00 EUR  Unit: pcs  VAT: 23%

#06616

Managed switch, 8x 10/1000 RJ-45 + 2x100/2,5G SFP + 2x1G/10G SFP, O/Open-Ring <30ms (ORing IGS-9822DGP+)

IGS-9822DGP+ is managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 2x 100/1G/2.5GBase-X + 2x 1G/10GBase-X SFP ports. The switch support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 °C to 75 °C. IGS-9822DGP+ can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1G/2.5G SFP Ports 2
1G/10G SFP Ports 2
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 32k MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 66 Gbps
Max. Number of Available VLANs 4096
Number of VLAN IDs VID 0 to 4095
IGMP multicast groups 64 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security
Software Features Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
QoS TOS/Diffserv supported,
CoS,
Application based QoS,
IP based bandwidth management
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
1G/2.5GBase-X SFP port Indicator Green for port Link/Act
1G/10Gbase-X SFP Port Indicator Green LED for Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Reset Function
Reset Button < 5 sec System reboot,
> 5 sec Factory default
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 19W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 74.3mm x 125mm x 153.6mm
Weight 1078g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-14÷167°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 585191 hrs
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGS-9822DGP+, Managed switch, 8x 10/1000 RJ-45 + 2x100/2,5G SFP + 2x1G/10G SFP, O/Open-Ring <30ms
* For special orders only
Net Price: 1 160,00 EUR  Unit: pcs  VAT: 23%

#07903

Managed switch, L3, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-R9812GP)

IGS-R9812GP is Layer-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The IGPSR9812GP supports Layer-3 routing for better network performance on large-scale LANs into multiple subnets to support long-haul and EMI immunity communications. The hardware Layer-3 switch is optimized to transmit data as fast as Layer-2 switches. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 75°C. IGSR9812GP can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
100/1000 Mbps SFP Ports 12
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 40 Gbps
Max. Number of Available VLANs 256
Number of VLAN IDs VID 1 to 4094
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard,
Https / SSH enhance network security
Software Features Hardware routing,
RIP and static routing,
IEEE 1588v2 clock synchronization,
IEEE 802.1D Bridge,
auto MAC address learning/aging and MAC address (static),
Multiple Registration Protocol (MRP),
RSTP/MSTP (IEEE 802.1w/s),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging,
Voice VLAN,
IGMP v2/v3 Snooping,
IP-based bandwidth management,
Application-based QoS management,
DOS/DDOS auto prevention,
Port configuration,
status,
statistics,
monitoring,
security,
DHCP Server/Client/snooping,
DHCP Relay,
Modbus TCP,
ARP inspection,
SMTP Client
Network Redundancy STP,
RSTP,
MSTP,
O-Ring
DDM Function Voltage,
Current,
Temperature
LED Indicators
Power / Ready indicator Green - Ready LED x 2
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
100/1000Base-X SFP port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 23W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 96.4mm x 145.5mm x 154mm
Weight 1520g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷70°C (-14÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
ORING NETWORKING
IGS-R9812GP, Industrial Managed Switch, DIN, L3, 8x 10/1000 RJ-45 + 12x100/1000 SFP w/DDM, O/Open-Ring <30ms
* For special orders only
Net Price: 1 680,00 EUR  Unit: pcs  VAT: 23%

#06619

Managed switch, L3, 16x 10/1000 RJ-45 + 4x1G/2.5G/10G SFP+, O/Open-Ring <30ms (ORing IGS-RX164GP+)

IGS-RX164GP+ advanced Layer 3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x10GBase-X SFP ports. The IGS-RX164GP+ supports routing protocols such as static routing, RIP v1/v2, OSPF and PIM which are suitable for large scale network environment. The hardware Layer 3 switch is optimized to transmit data as fast as Layer-2 switches. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 60°C. IGS-RX164GP+ can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 16
1G/2.5G/10 SFP+ Ports 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 16k MAC addresses
Priority Queues 8
Packet Buffer 2MB
Flash Memory 512Mbits
DRAM Size 8Gbits
Jumbo frame Up to 10K Bytes
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 112 Gbps
Max. Number of Available VLANs 4096
Number of VLAN IDs VID 0 to 4095
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Enable/disable ports,
MAC based port securitym Port based network access control (802.1x)m MAC-based authentication(802.1x)m VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Web and CLI authentication and authorization,
IP source guard,
Https / SSH enhance network security
Software Features Routing protocols – static routing,
RIP v1/v2,
OSPF,
PIM-SM,
PIM-DM,
VRRP,
TSN protocols – 802.1AS,
Qav,
Qat,
STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
LED Indicators
Power / Ready indicator Green - Ready LED x 3
Ring Master indicator Green - Indicate system operated in O-Ring Master mode
O-Ring indicator Green - Indicate system operated in O-Ring mode
Fault indicator Amber - Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
Amber for 10/100Mbps Link/Act
1G/10Gbase-X SFP+ Port Indicator Green LED for Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 23W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 116.4mm x 170mm x 180mm
Weight 1530 g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷60°C (-14÷140°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD Contact 8KV,
Air 10KV),
IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT Power 2KV,
Single 2KV),
IEC/EN 61000-4-5 (Surge Power 4KV,
RJ45 4KV),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing IGS-RX164GP+, Managed switch, L3, 16x 10/1000 RJ-45 + 4x1G/2.5G/10G SFP+, O/Open-Ring <30ms
* For special orders only
Net Price: 2 340,00 EUR  Unit: pcs  VAT: 23%

#07918

Managed switch, L3, 24x 10/1000 RJ-45 + 4 1G/10G SFP+ slots, O/Open-Ring <30ms (ORing RGS-R9244GP+)

RGS-R9244GP+ series are Layer-3 Gigabit managed redundant ring Ethernet switch with 24x10/100/1000Base-T(X) ports and 4x1G/10GBase-X SFP+ ports. These switches support Layer-3 function like RIP and static routing. Also RGS-R9244GP+ series support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) /Open-Ring/O-Chain/MRP/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RGS-R9244GP+ series support wide operating temperature from -20°C to 60°C. RGS-R9244GP+ series can also be managed centralized and convenient by Open-Vision as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 24
1G/10GBase-X with SFP+ port 4
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 8
Processing Store-and-Forward
Switching latency 7 µs
Switching bandwidth 128 Gbps
IGMP multicast groups 128 for each VLAN
Port rate limiting User Define
Security Features Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access security,
Https / SSH enhance network security,
Web and CLI authentication and authorization,
Authorization (15 levels),
IP source guard
Software Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
Network Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible),
Fast Recovery
LED Indicators
Power Indicator Green - power indicator
Ring Master indicator Green - indicates system operated in O-Ring Master mode
O-Ring Indicator (Ring) Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.
Fault indicator Green - System is operating continuously
10/100/1000Base-T(X) RJ45 port indicator Green for Link/Act indicator,
Dual color LED for speed indicator ~ Green for 1000Mbps / Amber for 100Mbps / Off-light for 10Mbps
1G/10GBase-X SFP+ Port Indicator Green for port Link/Act.
Fault Contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Input power 100 ~ 240VAC with power cord
Power consumption (typical) 37.4W
Overload current protection present
Physical Characteristic
Dimension (W x D x H) 431mm x 342mm x 44mm
Weight 6597g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -20 to 60 °C (-4 to 140°F )
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Warranty
Warranty period 5 years
ORING NETWORKING
RGS-R9244GP+, Industrial Managed Switch, L3, 24x 10/1000 RJ-45 + 4 1G/10G SFP+ slots, O/Open-Ring <30ms
* For special orders only
Net Price: 1 950,00 EUR  Unit: pcs  VAT: 23%

 DEDICATED MODULES
#07950

4x10G module, SFP+ (ORing SWM-04GP+_4)

Industrial 4-port Gigabit fiber module with 4x10G, SFP+ socket
Compatible with:
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
#07951 Managed modular switch, 16x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, (ORing RGS-P9160GC-M1-HV)
ORING NETWORKING
4x10G module, SFP+ (ORing SWM-04GP+_4)
* For special orders only
Net Price: 739,00 EUR  Unit: pcs  VAT: 23%

#08898

8x1G module, RJ-45 (ORing SWM-80GT)

Physical Ports
Industrial 8-port Gigabit Ethernet switch module with 8x10/100/1000Base-T(X) ports
Compatible with:
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
ORING NETWORKING
SWM-80GT, 8x1G module, RJ-45
* For special orders only
Net Price: 409,00 EUR  Unit: pcs  VAT: 23%

#08897

8x1G module, SFP (ORing SWM-08GP)

Industrial 8-port Gigabit fiber module with 8x100/1000Base-X, SFP socket
Compatible with:
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
ORING NETWORKING
SWM-08GP, 8x1G module, SFP
* For special orders only
Net Price: 359,00 EUR  Unit: pcs  VAT: 23%

 BYPASS SWITCHES
#07965

Bypass Switch, 4x LC Duplex (ORing IBS-102FX-MM-LC)

IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.
Physical Ports
LC connector 4 Duplex Multi-mode LC connector
Fiber Ethernet
Optical Fiber Multi-mode - 50/125μm or 62,5/125μm
Operating Wavelength 780÷1350 nm
Insert loss <1.0 dB
Switch time < 10ms
DIP Switch Settings DIP Swicth No.1 - Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Switch No.2 - Power-2 failed warning detection – (On) relay enable (Off) relay disable
LED Indicators
Power indicator Green - Ready LED x 2
Normal indicator Green On - Operated in normal mode
Fault indicator Amber - Indicates power failure occurred
Fault contact
Relay Relay output for power failure warning
Power
Input power Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power consumption (typical) 2.7W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9mm x 144.3mm
Weight 405g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -20÷70°C (-4÷158°F)
Operating Humidity 10%÷90% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C) 1,246,758
Warranty
Warranty period 1 years
ORING NETWORKING
IBS-102FX-MM-LC, Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector, DIN
* For special orders only
Net Price: 680,00 EUR  Unit: pcs  VAT: 23%

#08445

Bypass Switch, 4x LC Duplex (ORing IBS-102FX-SS-LC)

IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.
Physical Ports
LC connector 4 Duplex Single-mode LC connector
Fiber Ethernet
Optical Fiber Single-mode - 9/125μm
Operating Wavelength 1260÷1570 nm
Insert loss 1.6 dB
Switch time < 10ms
DIP Switch Settings DIP Swicth No.1 - Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Switch No.2 - Power-2 failed warning detection – (On) relay enable (Off) relay disable
LED Indicators
Power indicator Green - Ready LED x 2
Normal indicator Green On - Operated in normal mode
Fault indicator Amber - Indicates power failure occurred
Fault contact
Relay Relay output for power failure warning
Power
Input power Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power consumption (typical) 2.7W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9mm x 144.3mm
Weight 405g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -20÷70°C (-4÷158°F)
Operating Humidity 10%÷90% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C) 1,246,758
Warranty
Warranty period 1 years
ORING NETWORKING
IBS-102FX-SS-LC, Industrial 2-port optical bypass switch for fiber optical network, 4x LC Duplex, DIN
* For special orders only
Net Price: 770,00 EUR  Unit: pcs  VAT: 23%